Place the USB wireless dongle in the USB-C connector of your device and place the earbuds in your ears. The earbuds will automatically connect to your USB wireless dongle. If the earbuds don't pair automatically you can manually pair them again by connecting the JBL Quantum TWS to a mobile device via Bluetooth and open the JBL Headphones app. Turn on the "Dongle Pairing" mode and then press the pairing button on the USB wireless dongle. (Note: USB wireless dongle needs to be connected to an activated device). You will get a message on your JBL Headphones app that the pairing is successful and then press "Understood".

EON 208P:

Two of the inputs are made for stereo use:
CH 5/6 with volume control and ¼” phone plugs or RCA plugs, and
CH 7/8 with volume control and ¼” phone plugs or 3.5 mm stereo input.

Also, the Bluetooth wireless input is stereo.

EON ONE:

By pressing Volume - & JBL Connect button for 3 seconds. A voice will tell you the current software version of your Xtreme. The Xtreme must be ON.

By pressing Volume - & JBL Connect button for 3 seconds. A voice will tell you the current software version.

These two products are identical. The only difference between them is...

 

HORIZON 2: out-of-the-box is set to HOTEL OFF

 

HORIZON 2 HOTEL: out-of-the-box is set to HOTEL ON

 

On either unit, to toggle HOTEL mode ON or OFF, press and hold Alarm 1 and Preset 1. The LCD indicator will show the HOTEL status, ON or OFF.

 

The unit will retain this setting, even when unplugged. The only way to change the mode is to press and hold the two buttons again. Or course, a Factory Reset will also restore to the original out-of-the-box setting.

 

When HOTEL mode is ON, these are the following changes that occur.

 

• Alarm can only be set for a single day.
• Alarm will ONLY work as a buzzer.
• A Room Number can be set.
• A Max Alarm Volume can be set.
• Bluetooth cannot auto-reconnect.

To turn off the Horizon 2, Press the 'DAB/FM' button until no radio is playing.
This works in the order (from standby/off): DAB / FM / Off.

In Bluetooth mode, if the phone or tablet is disconnected, or nothing is played for 10 minutes, the Horizon 2 will go into standby mode automatically (not changeable).

To stop hearing your own voice through your headphones, please start the JBL QuantumENGINE software, navigate to the "Microphone" tab, and change the sidetone setting to 0.

Make sure your headset is configured correctly in your Windows settings. The setting should normally be JBL Quantum *Game* to experience QuantumSURROUND. 
Please check out this video to assist you further!
 
https://www.youtube.com/watch?v=LA80RmBrbYg

If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using.

These headphones consist of plastics, synthetic leathers and foams. All JBL Jr products were put through extensive tests and are compliant with Standard Consumer Safety Specification for Toy Safety.

HDMI Output

Both Enchant 800 and Enchant 1300 support these:

• HDMI 2.0b compliance
• HDCP 2.2 compliance (Means it supports 4K Blue-Ray Movies or streaming clients with 4K encryption)
• CEC features (Scroll to see support)

HDMI Input

Enchant features only 1 x HDMI input, and Enchant has 3 x HDMI inputs and support this:

• HDMI 2.0b.
• HDCP 2.2 for all HDMI input connections (Means it supports 4K Blue-Ray Movies or streaming clients with 4K encryption)
• 4K Pass-through.

CEC Support

CEC support only available through your HDMI connection and we are always using standard protocol for our products.
We support these:

• System Standby: When you press the "Power off" button on your TV remote, the Enchant soundbar will go into Standby mode as well.
• ARC or called Audio Return Channel: If you would have a TV BOX connected directly to your TV and using ARC from TV to Enchant soundbar, then all sound will be transferred through ARC connection.
  • In case you are not using the HDMI ARC connection then sound coming from the TV show will not be transferred to the Enchant soundbar.
• System Audio Control: Using your TV remote to turn up or lower the volume will be synchronized with the Enchant soundbar.

Bigger model is the Enchant 1300 and smaller model is the Enchant 800.

Harman Kardon Warranty Information

The limited warranty begins on the original date of purchase, and is valid only on products purchased from authorized resellers in the United States and used in the United States.

 

Warranty Period: Home Audio, Portables, Headphones

One year (except non-powered speakers, which are covered for five years)

 

Warranty Period: Car Audio, Marine, Powersports

One year

 

NOTE: Warranty coverage can differ by model, please refer to the warranty card included with your product to check your coverage.

 

What is covered by the Harman Kardon warranty?

Unless a different warranty period is stated in the Warranty Card provided with your Harman Kardon product, Harman Kardon warrants for a period of 1 year (5 years for any non-powered speakers) from the date of retail purchase by the original end-use purchaser, that this product, when delivered to you in new condition, in original packaging, from a Harman Kardon authorized reseller and used in normal conditions, is free from any defects in manufacturing, materials and workmanship. Refer to the Warranty Card provided with your Harman Kardon product for specific details including what is not covered along with other terms and conditions.

 

During the warranty period, the product or components will be repaired or replaced at Harman Kardon’s option, without charge for either parts or labor. Alternatively, Harman Kardon may decide at their sole discretion to refund the pro-rated portion of the original purchase price based on the remaining balance of the warranty period.

 

Any warranty service or replacement that is performed will not extend the original warranty period.

 

What is not covered by this warranty?

This limited warranty does not cover damage or failures that are a result of:

• Damage caused by accident, unreasonable use or neglect (including the lack of reasonable and necessary maintenance)
• Damage to, or deterioration of, any accessory or decorative surface
• Damage resulting from failure to follow instructions contained in the owner’s manual.
• Damage resulting from the performance of repairs by someone other than an authorized Harman Kardon service center
• Deterioration of component parts, the nature of which is to become worn or depleted with use such as batteries and headphone ear pads

 

How to obtain warranty service?

Before requesting a replacement, you may read through our support materials and FAQs. If your questions are not answered, please reach out to our experts for personal assistance and troubleshooting. If you still need to replace your product, please follow these steps:

 

1. Have your purchase receipt or order confirmation handy
2. Please visit our support section to fill out the warranty exchange form.