How To

Support Overview / How To

How To

1869 results

Sort

Page size

Functionality of Bass/Treble/Echo Buttons

The Bass, Treble and Echo buttons on the control panel on top of the Partybox only applies these EQs/effect to the Microphone inputs on the rear of the speaker - for Karaoke use. The EQs and Echo effect cannot be applied to other sources or inputs such as Bluetooth, Aux or USB.

If more bass is desired, there is a Bass Boost button on the top control panel (with 2 levels of Bass Boost: Off, Level 1 & Level 2, switched through pressing the button multiple times). This will be applied to the sources and inputs mentioned above (but not the microphone inputs).

Was this helpful? Thank you for your feedback!
Front LED flashes sporadically while streaming audio

Random flashing is an indication that the wireless link between primary and associated speakers was lost and recovered. If this happens too often, it may be caused by interference in the 2.4 GHz ISM band, caused by overcrowding of the band. Sometimes it helps to change location of the speakers, or to shut down other 2.4 GHz devices.

Was this helpful? Thank you for your feedback!
For how long does the alarm sound, if it is not interrupted?

Horizon's alarm sounds for 3 minutes, then it shuts off, or rather it goes into snooze, for 9 minutes. Then it sounds the alarm again for 3 minutes, followed by snooze for another 9 minutes. After this final snooze period, it starts playing, and keeps on playing until it is manually shut off. The light shuts off with the audio.

Was this helpful? Thank you for your feedback!
For how long can I play music before I have to recharge the battery?

Approximately 8 hours streaming music or 20 hours of talk time.

Was this helpful? Thank you for your feedback!
Focus 500 Headphones: Pairing Information

To power on the device, place one of the headphones inside your ear and press and hold the center button on the inline mic. You should hear the audible voice stating, “powering on” and a blue blinking light should appear at the top of the inline mic. If this is your first time connecting to a device, it should immediately go into pairing mode. The device should recognize the Focus 500/700 Wireless headphone. Once you select that option, the audible voice should state, “connected”. If you are trying to connect to a different device, turn the headphones on and press and hold for 3-5 seconds for the headphones to start searching for a different device. The headphones should appear on your discoverable devices within a few seconds. You should hear the audible voice stating, “powering on….looking for device” You will see the Bluetooth light alternate between red and blue when it is in pairing mode. Once connected the Bluetooth will change to a flashing LED light and the audible voice will state, “connected”.

Was this helpful? Thank you for your feedback!
FM Preset Stations

AUTO SCAN:
Long Press Enter/ Exit to Auto Scan
Auto Scan will automatically search for all available stations and save to Presets

TUNE DOWN / TUNE UP:
Press 1x to tune down/up by step, manually
Press 2x to tune to the previous/next preset station

Was this helpful? Thank you for your feedback!
FLIP 6: Software Update Release Notes
FLIP 6

Software Update Release Notes

------------------------------------------------------------------------

Version: 0.6.9.6

Release Date: January 24th, 2025

Release Media: OTA (over the air) Update through JBL Portable App

What’s New
1. Updated standby time
2. Improved Samsung TV compatibility
3. Performance improvement
------------------------------------------------------------------------

Version: 0.6.9.3

Release Date: July 5, 2024

Release Media: OTA (over the air) Update through JBL Portable App

What’s New
1. Fixed issue where a popping noise can be heard when pressing the power button to turn off the speaker
------------------------------------------------------------------------

Version: 0.6.8.9

Release Date: October 31, 2023

Release Media: OTA (over the air) Update through JBL Portable App

What’s New
1. Improved PartyBoost capability
Was this helpful? Thank you for your feedback!
Fit and Sizing

Try all Flex Fit Ear fins included (S/M/L) to find a snug fit for stability during workout. Usually the biggest size that fits comfortably in your ear will provide the most stability. Try all ear tip sizes (S/M/L) to find a snug seal for optimum sound quality, and look for a balance of comfort and acoustic sealing.

Was this helpful? Thank you for your feedback!
Firmware Information - JBL Firmware Update App

If you are experiencing issues with your headphones' Bluetooth disconnecting and reconnecting while on standby, there is a new Firmware Update app to resolve this issue. Start by downloading the app "JBL Firmware Update" (see links below).
Google Play Store: https://play.google.com/store/apps/details?id=com.jbl.tune.update
App Store: https://apps.apple.com/gb/app/jbl-firmware-update/id1548227663

Once downloaded, you can update your headphones firmware from there.
Below you can see step by step images of the update process.

Was this helpful? Thank you for your feedback!
Fast charging and protocol technology

The InfinityLAB charger supports Power Delivery 3.0 to provide you with the fast-charging experience.

Was this helpful? Thank you for your feedback!
Factory Reset Procedure

To reset your speaker to its factory settings, press and hold the Bluetooth and Vol + buttons for at least 10 seconds. The LED will emit a constant amber color until the reset is completed.

Was this helpful? Thank you for your feedback!
Factory Reset Procedure

To reset the JBL Charge 5, Charge Essential or Charge Essential 2:

Volume+ & Play/Pause Long press for 2 seconds while the speaker is ON

Please note: If the Charge 5 was previously paired with any phones/tablets, please remove the speaker from your list of paired Bluetooth devices. Now it has been restored to its factory settings, it will automatically enter into pairing mode the first time you power it on.

Was this helpful? Thank you for your feedback!