How To

The case does not have a spearate pocket for the charging cable, but it will fit into the case together with the speaker.

Yes. The auxiliary audio input connection is located in the back below the radiator between the feet.

Yes, there are three settings: high, low and off.

No, this feature is not yet embedded into our Harman Kardon Allure speaker. Future updates might include this feature, therefore keep an eye on the release notes in our HK Alexa setup app.

Yes, the Focus 500/700 features a 3 button mic that features, pause/play, track and volume control.

Yes, Control Xstream supports Spotify Connect, which can be used from the Spotify app if you have a premium account.

No, we only support SBC Codec and AAC Codec.

The Adapt connects to an active speaker or amplifier via the 3.5mm Audio Out jack. It acts a receiving point for Wi-Fi audio streams, upgrading existing audio equipment to work in the Harman Kardon Wireless HD Audio System.

Yes, no matter if Aura is in Sleep mode or Standby mode, an incoming Bluetooth signal will wake it up.

The display will timeout and switch off automatically after 30 seconds if no buttons are pressed to preserve battery life, but pressing any button will wake the display again. It is not possible to change or switch off the automatic display timeout.

The speaker itself will turn off automatically after 15 minutes inactive, if no music is playing on any mode or button are pressed (not possible to change).

The True Adaptive Noise Cancelling technology that is features in our CLUB ONE automatically adjusts noise-cancelling levels in real-time, 50,000 times per second to account for environmental ambient noises and personal attributes such as movement, hair and eyeglasses to deliver best-in-class Noise Cancelling and immersive sound in any environment.  
With the help of Feedforward and Feed Backward microphones, the Adaptive Noise Cancelling technology which is a feature in our CLUB 950NC and CLUB PRO+ TWS, fully monitors exterior sounds picking up low-frequencies and neutralizing them before they reach the ear. The headphones generate a sound that's phase-inverted by 180 degrees to the unwanted noise, resulting in the two sounds cancelling each other out. 
In addition, all headphones allow the listener to adapt or adjust the level of ambient noise through features like Ambient Aware and TalkThru.

Harman Kardon Radiance 2400 uses patented Constant Beamwidth Technology (CBT) with 24 drivers to create an all-new listening experience. Typical loudspeakers have very narrow sound dispersion in the mid-range and high frequencies, making a very narrow sweet spot for one listener. On the other hand, CBT delivers room-filling sound dispersion and a resulting wide sweet spot, so everyone in the room has great listening experience. The use of CBT allowed us to reduce the cabinet size dramatically. This resulted in a very sleek loudspeaker that does not compromise on sound but looks even better when compared to bulky wooden floor-standing speakers in combination with large AV components.

If you encounter an "Internal error 300" error message when using Deezer from inside our HK Controller app, we advise you to log out of your account and log in again, still in the Controller app. The error message is a communication error between speaker and Deezer server. If you still encounter this after you have logged in again, please consult our helpdesk.

Developed for HARMAN Professional Solutions, this technology ensures every listener in the room enjoys the same exhilarating sound experience via precisely-tuned beam-forming components. HARMAN’s revolutionary technology uniquely unites 24 precisely calibrated 1.25” transducers in each of the elegant Radiance speakers to deliver the same superior sound coverage from corner to corner. 

If there are drop out or connection issues when using PartyBoost or Connect+, it could be one of three things.

1.      Units are too far apart (move units closer together) 

2.      Interference from other 2.4gHz wireless units in the area.

3.     Unit is no longer working as designed

Here are some steps to isolate the issue:

 Try taking the units out of the house and test it outside with no interference to see if you still experience connectivity issues. If you still experience connectivity issues, please try steps below:

Whatever unit drops off, remove that from the chain. Test the rest of the speakers and keep doing it until you find the speaker that is causing the drop outs.  If all speakers begin to drop off, please try a different order and repeat. Repeat this process with each unit being the “main speaker”. 

 Make sure to turn off all WiFi/RF devices. (Router, laptop, baby monitor, Nest cams, IP cams, WiFi switches, WiFi outlets, WiFi lights, cordless phones, etc.) 

You should be able to identify the issue/speaker by following these steps. 

It is very simple to connect to your Car with the JBL Partybox 200 or 300. Use the included cable that connects through the cigarette connector in your Car and power on the Partybox! Please note that the 12V connection does not charge the battery in the Partybox 300 - it will only power the Partybox when in use. To charge the battery, it will have to be plugged into AC power ( 110 - 230V )

If the remote control stopped working, please check if the batteries are drained. If so, replace them with new ones.

The remote control may have failed to connect with the digital hub. On the touchscreen, tap “Options” > “Remote Control”, then follow the onscreen instructions to pair with the digital hub again.

It is possible to connect a turntable to the AUX input of the Radiance 2400. Depending on the turntables output specifications, a phono-preamplifier will in most cases be necessary to connect in-between.

The ADAPT+ is made to connect an external subwoofer. The subwoofer needs to be an active device, which means that it must have its own, built-in amplifier.

The BDS 235 and 535 owner's manual states that you need an ADAPT to make your system wireless. You do it by connecting the BDS system's analog outputs to the ADAPT's analog AUX input. The ADAPT will then re-stream to your OMNI speakers wirelessly. However, if you listen to the OMNI speakers, and want to listen to the music directly from the BDS system at the same time, there will be a delay in the sound from the OMNI speakers. The BDS speakers will play the music first, and since the ADAPT needs to process the data wirelessly, a delay results. To avoid delay, please mute the BDS system, or connect from the ADAPT line-out to the BDS AUX in instead of the other way around. With this setup, you can only play to the BDS from an OMNI speaker, which will not be delayed in sound.

This product is not supported by Connect + or Partyboost on the JBL Portable app. They cannot connect to other portable speakers wirelessly.

It can fast charge almost anything with a USB-A or USB-C cable—phones, earbuds, power banks, cameras, even your laptop or gaming console.

The right ear cup features volume and (longer press) skip back/forward button, Aux input and USB charging port. On the left side ear cup the CLUB headphones feature the standby button, Bluetooth button and the Smart Ambient button (for Ambient Aware and TalkThru) or, with a longer, the ANC button. JBL has also placed an aux port on the left ear.
 

The silicone ear-tips can be removed and washed in lukewarm water with a little dishwasher liquid. Do not put the headphones into water. Wipe them off with a damp cloth with mild solution of dishwasher liquid. The actual opening for sound can be carefully cleaned with a cotton swab and lukewarm water with dishwasher liquid. Make sure that no water floats into the headphone.

The ear-tips can be removed and washed in luke-warm water with a little dish soap. Do not put the headphone into water, it may dried of with a moist cloth. If cloth and a little water doesn't clean sufficiently, use the cleaning-tool which has a brush and scraper to do the job properly

CITATION TOWER

Software Update Release Notes

------------------------------------------------------------------------

Version:  94384

Release Date: June 24, 2024

Release Media: OTA (over the air) Automatic Update

 

What’s New

1. Security improvements
2. Performance improvements

General information about WiSA:

WiSA is a wireless system designed specifically for audio and speakers. An audio system that incorporates WiSA technology has it's own internal wireless system. It is capable of doing 96kHz/24bit audio with an audio latency of only 5ms, virtually undetectable by the human ear.

For more information on WiSA technology, please go to the official WiSA website.

If a product is WiSA Certified, it can be used with any other WiSA certified product. For example a WiSA Ready TV with at transmitter.
Note: The overall sound quality is dependent on the processing and setup in the WiSA TV & transmitter, and may result in a performance (EQ, crossover and levels) not intended by the speaker manufacturer. To be sure that the Citation products sound the best, use a Citation Bar product as the main "hub".

WiSA Certified products:

Citation Surrounds
Citation Sub
Citation Sub S
Citation Towers

Products making use of WiSA technology (not certified):

Citation Bar
Citation Multibeam 700
HK surround

Limitations:

WiSA does not offer 3D audio formats like Dolby Atmos, and DTS:X yet, so at the moment it is limited to 5.1 or 7.1 Dolby Digital. So regardless of which brand of WiSA speaker you choose, Dolby Atmos will not be available yet.

CITATION OASIS

Software Update Release Notes

------------------------------------------------------------------------

Version:  94384

Release Date: May 20, 2024

Release Media: OTA (over the air) Automatic Update

 

What’s New

1. Fix security issue

------------------------------------------------------------------------

Version: 94340

Release Date: January 22, 2024

Release Media: OTA (over the air) Automatic Update

 

What’s New

1. Update to Google SDK 1.56
2. Fixed DAB stations not appearing in scan list
3. Fixed issue with radio powering on without user input
4. Improved performance
5. Fixed bugs

CITATION MULTIBEAM 1100

Software Update Release Notes

------------------------------------------------------------------------

Version:  23.42.21.81.01

Release Date: August 5th, 2024

Release Media: OTA (over the air) Automatic Update

 

What’s New

1. Upgrade to Google SDK 1.56
2. WiFi Setup Improvements

CITATION BAR

Software Update Release Notes

------------------------------------------------------------------------

Version:  94384

Release Date: June 24, 2024

Release Media: OTA (over the air) Automatic Update

 

What’s New

1. Security improvements
2. Performance improvements

CITATION AMP

Software Update Release Notes

------------------------------------------------------------------------

Version:  94384

Release Date: June 3, 2024

Release Media: OTA (over the air) Automatic Update

 

What’s New

1. Fixed security issue

------------------------------------------------------------------------

Version:  94326

Release Date: May 6, 2024

Release Media: OTA (over the air) Automatic Update

 

What’s New

1. Upgrade to Google SDK 1.56
2. Allow "Mono Full Range Out" as a Subwoofer crossover setting
3. Bug fixes
4. Performance improvements

CITATION ADAPT

Software Update Release Notes

------------------------------------------------------------------------

Version:  94369

Release Date: June 24, 2024

Release Media: OTA (over the air) Automatic Update

 

What’s New

1. Security improvements
2. Performance improvements

CITATION 300 & CITATION 500
Software Update Release Notes
------------------------------------------------------------------------

Version:  94384 
Release Date:  June 3, 2024
Release Media:  OTA (over the air) Automatic Update

What’s New

1. Fixed security issue

------------------------------------------------------------------------
Version:  93641 / MCU: 0.2124.2
Release Date:  August 22, 2022
Release Media:  OTA (over the air) Automatic Update

What’s New

1. Fixed a grouping issue with other Chromecast built-in speakers
2. Resolves the issues with the "Google Home" app when used with an Android device.
3. Other bug fixes and improvements

100W, 65W and 30W InfinityLAB chargers can fast charge USB-C equipped laptops.
The 100W charger supports laptops that require output power no more than 100W.
The 65W charger supports laptops that require output power no more than 65W.
The 30W charger supports laptop that require output power no more than 30W.

We suggest picking one way to charge your phone, so either charge your phone through wireless charging or wired charging. You cannot charge one device using both options at the same time.
 

USB-A output doesn’t support PD fast charging. To enjoy PD fast charging and with your device support, please use USB-C output (if your InfinityLab device has a USB-C output).
 

It will take about 4 hours to fully charge the InfinityLab ClearCall speakerphone using a charger that supports 5V 2A.

You will need to dry the charging port completely before plugging in power for charging.
 

To charge the headphones, place inside charging case. While charging, both LEFT and RIGHT ear bud will display a sold red light. Once the headphones are fully charged. The red light will turn OFF. When the charging case is fully charged, the white LED's will light up accordingly. Battery life can last for 10-hours per charge. You may recharge your earphones for another 40-hours playtime with the charging case. It takes 2 hours to fully charge the charing case.  

Our InfinityLab power bank should work with most cases in the market, and it depends on the design of the protected case/cover.
However, if your case’s bottom surface is thicker than 3mm, it may impact your wireless charging experience, and we recommend taking off the protected case/cover for the best charging experience.

If your phone case/cover has a metal plate on the back, it will not charge your device since it is a security feature of the FOD (Foreign object detection).  This means our Infinity Lab Qi-certified power bank can detect if a foreign object, such as metal, is on its surface. If that happens, the wireless charger either stops charging or does not start charging at all.
 

The InfinityLAB charger will not damage your device while charging.

The InfinityLAB charger will deliver the power your device needs during charging, and the InfinityLAB charger features auto protection against overheating, overcurrent, and overvoltage.

InstantGo 10,000 with a built-in USB-C cable and InstantGo 10,000 Wireless should be able to charge your laptop.
However, it may not apply to laptops that require output power of more than 30W.

Please check your laptop requirement before charging it with our devices.
 

Yes, it's normal to get warm during charging. The InfinityLAB charger features over temperature protection to ensure your usage is safe.
 

Yes, you can use the headset while charging!

CHARGE 5 WI-FI

Software Update Release Notes

------------------------------------------------------------------------

Version:  24.25.41.60.00

Release Date: June 28, 2024

Release Media: OTA (over the air) Update

 

What’s New

1. Add ambient sound playback feature for Moment Button - Forest, Rain, Ocean, Citywalk
2. Add product registration support in One App
3. Performance enhancement

------------------------------------------------------------------------

Version:  24.11.11.60.00

Release Date: April 9, 2024

Release Media: OTA (over the air) Update

 

What’s New

1. Add Roon Ready feature
2. Multi-Channel Bass optimization
3. Performance enhancement

------------------------------------------------------------------------

Version:  23.43.41.60.00

Release Date: November 15, 2023

Release Media: OTA (over the air) Update

 

What’s New

1. Add support for Immersive Audio feature
2. Add support for TIDAL Connect

 

CHARGE 5

Software Update Release Notes

------------------------------------------------------------------------

Version:  0.8.9.0

Release Date: January 15th, 2025

Release Media: OTA (over the air) Update through JBL Portable App

 

What’s New

1. Updated standby time
2. Improved Samsung TV compatibility

1. In order to change the name of the speaker, you must first connect your speaker via Bluetooth and then download the JBL Connect app.
2. Once the app is downloaded choose app and wait for it to recognize your device.
3. Now that your speaker is highlighted, choose the gear located either below or to the right of the speaker image.
4. Once you choose the gear you will have the option to edit the name by clicking on the small pencil icon.
5. After you change the name, you will see a notification stating to "Reconnect to  Apply New Name"
6. Go to your Bluetooth settings select "Forget This Device" and then reconnect to establish the new speaker name.

In the customized lightshow, you can select up to 3 patterns, however; the preset color cannot be changed. You can always adjust the lightshow brightness. 
 

On the bottom panel, rotate the battery cover into the unlocked position and remove the cover. Press the battery clip visible on the back side of the battery compartment to allow the existing battery to come out. Then insert the new battery in the slot with the + side visible (facing up), and install the battery cover again. Rotate the battery cover to lock it into place.

You can change the JBL Pulse lightshow via JBL Portable app.

1. Connect the Pulse with your phone, open the JBL Portable app and wait for app to recognize your speaker.  
2. Click the Lightshow button to enter the lightshow set-up
3. Swipe left and right to change lightshow
4. Swipe to customized page, to select your favorite pattern and customize your lightshow
5. Click the color wheel to change color or enter camera color picker
6. Click the brightness button to adjust brightness of the lightshow

                                                                                                                                       

It is not possible to connect further speakers (center or rear) to the system.

The Harman Kardon Radiance 2400 is a 2.1 sound system. With it's unique sound characteristics and sound dispersion, it can fill a large room with high quality sound. 

You can stream the audio to your AirPlay compatible speaker using the Control Center on your iOS device by completing the following steps:

 

1. On your iPhone or iPad, open Control Center by swiping down from the top right of the screen.

2.  Find the audio icon in the upper right-hand corner and then tap the AirPlay icon.

3. Select the speaker from the list of devices to stream audio using AirPlay.
 

You can also use AirPlay directly from some iOS apps, like Apple Music by:
1. Opening the app.
2. Tap the AirPlay icon.
3. Select your AirPlay compatible speaker.

 

No. Bluetooth does not work under water. The Endurance DIVE however has a built-in MP3 player for music, and is IPX7 waterproof. This means you can use the headphones submerged to 1 meter depth, up to 30 minutes at a time. Also note that for normal swimming, you won't be submerged all the time, so the headphones should be waterproof for the duration of your swim.

You have the option to turn the Noise Cancellation on and off by using the switch that is located on the right side of the NC box. When choosing the switch option, you will see a green light inside the the switch will indicate that the Noise Cancelation is on. To turn off the Noise Cancelation, move the switch down towards the cable and the green light will turn off. When charging this device with the micro USB charging cable included in the packaging, you will see the light turn orange to indicate that it is charging.

Yes, the Inspire 500 features a microphone located on the cord. We recommend running the cord under your chin for the best call connection.

Yes. To take a call from the Live 200BT press the center button located on the RIGHT neckband for 1-2 seconds. To hang up, simply press the center button again.

Yes, the Live 100 features the one button microphone that allows you to receive and end calls. Simply press the middle button on the inline mic for 1-2 seconds to answer the call. If you wish to hang up, press and hold the center button again for 1-2 seconds.

The music track switching is only available when the music is playing. This is due to a signal detect issue, which is only present when the music is paused.

Yes. A built-in microphone combined with a patented echo cancellation system secures clear and easy phone conversation. If a phone call is received while listening to music just push play button to answer the call. No need to find or touch the phone. This hands-free functionality can even be used for phone conferences