How To

Support Overview / How To

How To

1867 results
  • Can I listen to music while charging my E65BTNC?
    Yes, but only via cabled connection. When you insert the USB charging cable, Bluetooth is switched off, so wireless listening is not possible.
  • Can I listen to music while charging my E55BT or E45BT?
    Yes, but only via cabled connection. When you insert the USB charging cable, Bluetooth is switched off, so wireless listening is not possible.
  • Can I listen to music while charging?
    Yes, you can listen to music via cabled connection while you charge the battery. As soon as you insert the charging cable, all active circuits are switched off, and only the analog cable input remains active. When charging has finished, you can use the wireless and noise cancelling functions again.
  • Can I listen to lossless audio on my speaker and does it support USB music playback from laptops and tablets?

    Yes, you can listen to lossless audio from your speaker.

    If you own a Flip 7 or Charge 6, then make sure software version 1.9.0.1 or later is installed via the JBL Portable app.

    You will then be able to enjoy lossless audio through a USB cable connection to your laptop or tablet.

     

    Follow these steps to enable USB audio playback:

     

    a. Enter USB Audio Playback mode

    Connect a USB-C cable to the speaker.

    Press and hold the "Play" button on the speaker, you'll hear a confirmation tone when USB Audio Playback mode is activated.

    b. Revert to Bluetooth mode

    The speaker will automatically switch back to Bluetooth mode when the USB cable is disconnected from the USB port.

    c. Re-enter USB Audio Playback mode

    To switch back to USB Audio Playback mode, reconnect the USB-C cable and repeat the steps.

     

    A USB type A-C or type C-C shorter than 1,2m is recommended for optimal performance.

    USB thumb drive playback is not supported.

  • Can i learn additional IR codes, other than what the QSG is saying?
    We only offer volume+ and volume-, mute and power for your TV remote to learn these IR codes.
  • Can I install it under the driver’s or a passenger’s seat?
    In most cases there would not be room for this driver under a car seat. But there is a under seat model.
  • Can I get wallmounts for Control Xstream
    Please note that although the Control Xstream does have a threaded insert for brackets, JBL offers no brackets. Custom made wallmounts should be used.
  • Can I get TuneIn Radio to work with first-generation OMNI speakers, if I also have one new OMNI+ speaker?
    Google has licensed Chromecast to OMNI+ speakers only. Therefore, the only way to listen to TuneIn Radio on first-generation OMNI speakers is to use Bluetooth.
  • Can I get a wall bracket for Control X Wireless?
    Please note that although the Wireless version of Control X does have a threaded insert for brackets, JBL offers no brackets. The brackets for the Control X passive model cannot be used with the wireless version. Brackets for the wireless version must be custom made.
  • Can I factory reset my JBL Playlist speaker?
    Yes, the JBL Playlist can be reset to factory settings. First, Power ON the JBL Playlist. Secondly, press and hold the Play and Volume (-) buttons simultaneously for about 10 seconds, and after 10 seconds you should see the Play/Pause and Bluetooth button light up, followed by the speaker going into Standby. Once you see the speaker powers back ON, reset is complete.
  • Can I do something to have my Horizon wake me up with lower volume than the built-in alarms?
    Since the internal wake-up signals and FM radio do not permit adjustment of the wake-up signal volume, it may be desirable to use an alternative signal source. Connect a smartphone with Bluetooth, and set the Horizon to use the Bluetooth input for wake-up sound. If you reduce the output volume on your smartphone to a suitable level, you will experience a much lower signal volume when Horizon activates the smartphone through Bluetooth when the wake-up time has been reached. With a smartphone, both music from the phone's internal memory, its FM radio, web radio or streamed music may be used. If you want to wake up to a certain song, select the desired tune on the phone, and when it receives the Play command from Horizon, it will begin the right tune.
  • Can I disable Voice function?
    Yes, there are two ways to disable the voice assistant feature.
    1) double tap the left ear cup, or 2) In the My JBL Headphones app, de-select both assistants.
  • Can I customize my Heart Rate Zones?
    Currently in Record, you can not customize ranges for each heart rate zone but you can customize your Max heart rate, which affects your zone ranges. Edit your Max heart rate by going to My Profile page by tapping the person icon in the top left corner. Tap the edit button in the top left corner to edit the Max HR field.
  • Can I create my own custom equalization settings?

    Yes!

    By using the Samsung SmartThings app, you can change the equalization settings of the speaker to fit your personal taste by adjusting the settings of each frequency to create your personalized EQ:

    • BASS: Adjust the lower frequency sounds, such as bass or a kick drum.

    • MID: Adjust the mid-frequency sounds, such as human speech.

    • TREBLE: Adjust the higher frequency sounds for clarity.

  • Can I create my own custom equalization settings?
    Yes!
    By using the JBL ONE app, you can change the equalization settings of your speaker/soundbar to fit your personal taste by adjusting the settings of each frequency to create your personalized EQ:
    • BASS: Adjust the lower frequency sounds, such as bass or a kick drum.
    • MID: Adjust the mid-frequency sounds, such as human speech.
    • TREBLE: Adjust the higher frequency sounds for clarity.
  • Can I create my own custom Equalization setting?
    Yes. By using the My JBL Headphones App you can change the equalization settings of the headphone to fit your personal taste. JBL provides you with three presets, or you can adjust the setting of each frequency to create your own personalized EQ
  • Can I create a Multi-room system with Harman Kardon Allure?
    Not yet, because this feature is not implemented in our system. We are working on future updates to add the functionality that will make Harman Kardon Allure work in a Multi-room environment.
  • Can I control Zone 2 functions with my iPhone?
    Yes, download the Harman Kardon Remote app to do this.
  • Can I control volume on the C100SI?
    No, the remote control is a 1-button type which does not feature volume control.
  • Can I control my OMNI 10+, 20+ or 50+ speakers when I'm on 2.4GHz Wi-Fi network?
    Yes, with OMNI+ you can add speakers to both bands, but your smart device is not required to be on the same band, just be sure they are on the same network.
  • Can I control iOT devices with my Citation speaker?
    Citation will work with any smart home or iOT device labeled Works with Google Assistant. Visit http://assistant.google.com to learn more.
  • Can I connect to multiple devices on the JBL DUETNC?
    Yes. The JBL DUETNC headphones have the ability to pair and connect to two devices at the same time.
  • Can I connect to multiple devices on the E65BTNC?
    Yes. The E65BTNC headphones have the ability to pair and connect to two devices at the same time.
  • Can I connect to multiple devices on the E45BT/E55BT?
    Yes. The E45/E55BT headphones have the ability to pair and connect to two devices at the same time.
  • Can I connect to multiple devices at the same time on the Inspire/Focus 500 headphones?
    Yes, these headphones can be connected and paired to two devices at the same time.
  • Can I connect to multiple devices at the same time on the Everest 310/710 headphones?
    To pair and connect to a different device, press and hold the bluetooth button located on the bottom of the right ear cup until you hear the audible voice stating "looking for device." Make sure the the device you are trying to connect to are in search mode. The headphones should display on "Discoverable Devices" within 2-3 seconds. Choose the Pair option and you should hear the audible voice state "connected" and the LED light should transition into a slow blinking blue light.
  • Can I connect the headphones to my UA band?
    Yes, Once you've added your UA Sport Wireless Heart Rate to the UA Record mobile app any workout started on your UA Band will automatically connect to the headphones if powered on and present. The Band will indicate the heart rate sensor is connected and begin showing your heart rate zones using the color LED on the side of the Band.
  • Can I connect the Citation Multibeam 1100 to the Citation Towers?
    It is not possible to connect the Citation Multibeam 1100 to the Citation Towers.
     
  • Can I connect my Soundgear with analog jack cable, or other cables?
    No, Soundgear is wireless Bluetooth only, and needs to be charged to play music. But the BTA 20 transmitter must of course be connected with a cable to the signal source.
  • Can i connect my Headphone to my HD 3700?
    No, it is not possible to connect a headphone to your HD 3700.
  • Can I connect my EON speaker to a computer with Bluetooth?
    Yes, provided that your computer supports A2DP Stereo audio streaming over Bluetooth, you can connect to JBL EON 208P and EON ONE. If your computer can connect to a mouse, a keyboard or a printer with Bluetooth, but not the EON speaker, please check if A2DP is supported. If it is not, ask the provider or manufacturer of your computer how to establish A2DP support.
  • Can I connect my Control Xstream speakers to 5GHz Wi-Fi?
    Yes, Control Xstream uses both 2.4 GHz and 5 GHZ wi-fi networks.
  • Can I connect my BDS x35 with WPS?
    No, that is not possible. You can only connect it to WiFi through the settings menu of the BDS. Find your WiFi network and type in password, then your BDS is connected to the network. Or you can use LAN connection.
  • Can I connect multiple speakers together with a cable?
    Yes. An auxiliary splitter would be required to connect multiple speakers wired utilizing the auxiliary audio inputs.
  • Can I connect multiple devices to the Flip 3 SE?
    No, it's not possible to connect simultaneously from multiple devices to the Flip 3 SE. If you need a new device to pair with the Flip 3 SE, please press the Bluetooth button the Flip 3 SE to enable pairing mode. The Flip 3 SE should be available in the list of Bluetooth devices on your mobile phone/tablet
  • Can I connect more than one speaker together playing the same music?
    Yes. 2 speakers can connect together playing the same music from a single source. This is the Wireless Dual Sound feature.
  • Can I connect more than one speaker togerther to play the same music from a single source wireless?
    Yes. Connect 2 speakers using bluetooth from one source. This is the Wireless Duel Sound feature.
  • Can I connect more than one Soundgear to the BTA transmitter?
    No. The two Soundgears can connect to the BTA, but not to each other. Also, when using one Soundgear, the use of aptxLL may result in a delay. If you are connected to two, the delay may be more noticeable, since LL is no longer active.
  • Can i connect more than one Bluetooth device to my Control X wireless?
    No, you can only have one activate device connected to the speaker. Please un-pair your current Bluetooth device, then connect with another device if needed.
  • Can I connect more than one Bluetooth device at a time?

    You can connect up to two Bluetooth compatible smartphones or tablets at a time to your device.

     

  • Can I connect more than one Bluetooth device?
    You can connect up to 3 Bluetooth devices at the same time. In case you are listening to music via Bluetooth, each device will override the other when a command (play) is selected.
  • Can I connect it to a computer or laptop?
    Yes. Bluetooth or Auxiliary.
  • Can I connect Clip2 to a computer.
    Yes. Connect Bluetooth or auxiliary. Remember that Bluetooth can only work if the source supports A2DP stereo audio streaming, which may not be the case for all computers.
  • Can i connect 3 or more speakers together with JBL Connect?
    No, for now it is only possible to connect two speakers together using the JBL connect feature. Newer JBL products feature JBL Connect+, which allows you to connect > 100 devices simultaneously, these however are not compatible with older JBL products featuring JBL Connect
  • Can I connect 2 separate wired devices to the Boost TV AUX and optical Inputs?
    Yes, you can definitely connect two wired devices at the same time. However, the Boost TV will only pass one connection at a time. If two connections are playing at the same time, the optical device will take priority.
  • Can I connect 2 separate devices to the SB 250 AUX and optical Inputs?
    SB 250 will only pass one connection at a time. If two connections are playing at the same time, then the optical device will take priority.
  • Can I choose between sound from my TV or sound from the AVR 70?
    Yes, in the HDMI Setup Menu, you can select either Sound To TV or to Amp, (which is the AVR 70). This detail is not mentioned in the owner's manual.
  • Can I choose between sound from my TV or sound from the AVR?
    Yes, in the HDMI Setup Menu, it is possible to select either �Sound To TV� or �Sound To Amp�, Amp being the AVR. This detail is not mentioned in the owner's manual.
  • Can I check the software version on my Boost TV?
    Yes, press Volume - and Connect button at the same time for 5 seconds. A voice reads out a set of numbers, which is the current software version. Using the HID Software Tool, available in the Manuals & Downloads section, you can find out if an update exists, and if so, install the update.
  • Can I check the software version of my AURA Studio?
    Yes, hold down the Volume and Bluetooth buttons at the same time. A voice will call out some numbers, and that is the software version on your AURA Studio.
  • Can i check my software version for ESQUIRE 2?
    Yes, press and hold microphone mute button & volume - button at the same time. A voice will speak up some numbers, that indicate the current software version in your ESQUIRE 2.
  • Can I charge the speaker when it is wet?
    You need to dry the micro USB or power ports completely before plug-in power for charging.
  • Can i charge mobile device via the USB port on the front?
    You can charge your mobile Phone, but not mobile tablets.
  • Can I charge it connected to a wall power outlet.
    Yes. A usb wall adapter would be required.
  • Can I change the sound filters on my N40 headphone?
    Yes, the N40 is equipped with three different sound filters to provide you with personalized sound tuning capabilities. The sound filter options are bass boost, reference sound and high boost.
  • Can I change the Bluetooth name for my JBL SB 250?
    Sorry, this is not possible.
  • Can I change the Bluetooth name for my JBL Boost TV?
    Sorry, this is not possible.
  • Can I change the batteries in an AKG K912?
    You can't use standard rechargeable batteries with the K912. If you still have the original batteries, and compare them to the generic batteries you are trying to use, you will see the difference on the - ( minus ) side of the battery. On the original battery that comes with the headphones, there is a bare metal band on that side, which connects to a sensor in the headphones ( you can also see this sensor inside the battery compartment, on the - side ). A generic rechargeable battery does not have this metal band for the sensor, so the charger won't charge them. This is for protection, in case you have non-rechargeable batteries in the headphones and put them on the charger. This could cause damage to the headphones.
  • Can I change my Bluetooth name for my LINK 10, 20, 300 and 500?
    Yes, once you have setup the speaker via the Google home app, the name you entered during setup process is also displayed in Bluetooth settings.
  • Can I cancel my order for a Personalized Product?
    JBL Personalized Products are custom-printed to your individual specifications. Orders cannot be cancelled once they are finalized on our website.
< 1 ... 27 28 29 30 31 32 >

Can’t find what you’re looking for?

Call Us

Call Us

Talk to a product expert
Call Us now at: (877) 871-6755

Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)

Chat with Us

Chat with Us

Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)

message

Text Us

Text with a support agent via SMS at:
628-333-7807

Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)