How To
How To
-
The Aura Studio has been put into demo mode, here is how to detect and disable this feature.
How to detect "demo mode" on the Aura Studio:- When plugged in, the Aura Studio will stay powered on at all times (it will not go into standby mode).
- All buttons on the speaker will not work.
- Bluetooth mode is disabled, wireless connection will not work.
- Only the aux cable input can be used to play music; volume is automatically set to maximum and cannot be adjusted (all buttons are disabled).
How to disable "demo mode" on the Aura Studio:- Make sure the speaker is powered ON.
- Press and hold the Vol - and Bluetooth button for at least 5 seconds
- The speaker will power OFF, demo mode is disable.
- Now when the speaker is powered ON, you will have full access to all buttons and features.
Was this helpful? Thank you for your feedback! -
Check to see if it happens with all source devices (TV, BluRay, DVD, etc.). If it only happens with one device and not the other, the issue may be with that device. Make sure you do not have any HDMI adapters or splitters. These can cause issues with video and audio.Was this helpful? Thank you for your feedback!
-
Check to see if it happens with all source devices (TV, BluRay, DVD, etc.). If it only happens with one device and not the other, the issue may be with that device. Make sure you do not have any HDMI adapters or splitters. These can cause issues with video and audio.Was this helpful? Thank you for your feedback!
-
If you are having trouble with distortion or drop out, try the following suggestions:
Move the audio source closer to the speakers
Move the speakers closer to each other
Make sure the streaming speaker (host) only connects to one audio source, disconnect the Bluetooth connection between the streaming speaker (host) and other audio source
Make sure the audio source only connects with one streaming speaker (host), disconnect the Bluetooth connection between the audio source and other speakers
Restart both your speakers and the audio source
Make sure speakers are away from other sources of wireless signal – you could be experiencing interference
Re-pair the audio source with your speaker
If you’re streaming audio content from the internet, the issue could be with the internet connection and not your speakerWas this helpful? Thank you for your feedback! -
Yes, this is correct. The AVR171, 171S, 1710 & 1710S only supports OSD on on the HDMI 1 output. HDMI 2 doesn't not show the OSD. The AVR370 and 3700 supports OSD on both HDMI outputs.Was this helpful? Thank you for your feedback!
-
Yes, this is correct. The AVR 1x1S does not support OSD on HDMI 2 out, only on HDMI 1.Was this helpful? Thank you for your feedback!
-
Yes, the foam pads are detachable. They are fixed with a flexible lip that sits in a groove all the way round, and are easy to replace.Was this helpful? Thank you for your feedback!
-
No, the voice prompts are only available in English.Was this helpful? Thank you for your feedback!
-
UA Train features an IPX4 rating which offers protection from a splash of water in any direction for at least 5 minutes. They cannot be fully submerged in water.Was this helpful? Thank you for your feedback!
-
Unfortunately if these headphones are overexposed to sweat or water, it may compromise the controls or sound quality.Was this helpful? Thank you for your feedback!
-
No. The speakers are in the front where the logo is located.Was this helpful? Thank you for your feedback!
-
No. Only the front.Was this helpful? Thank you for your feedback!
Can’t find what you’re looking for?
Call Us
Talk to a product expert
Call Us now at:
(877) 871-6755
Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)
Chat with Us
Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)
Text Us
Text with a support agent via SMS at:
628-333-7807
Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)