How To

Yes, the cords on the new N40 are detachable. You can remove the cords from the top of the stainless steel earbud housing. Please make sure that you attach the left cord to the left ear plug and the right cord to the right earbud. You will see a red dot indicator for Right and and blue dot indicator for Left on the cable. There are two detachable cables provided. One detachable straight cable and one detachable 3 button microphone cable.

No. Although the Control X Wireless have a rugged exterior and are portable, they are not all-weather speakers. Any direct exposure to harsh weather condition (rain, snow, extreme hot/cold temperatures) will damage the speakers.

No, rack ears are not available for the No. 536 mono amplifiers.

The JBL Bar series soundbars supports three CEC commands: - System Standby - One Touch Play - Audio Return Channel.

Yes. If neither the size 5 or size 7 enhancers provide a secure fit, our customer care team can send you a complimentary sizing pack with two additional sizes. Please email ua.jblsupport@harman.com to request yours today.

This headphone does not support aptX, aptX HD, aptX Low Latency audio codecs.

Yes, you may charge your speaker from your desktop or laptop, but the charging time will be longer than using the supplied power adapter.

Here are all the possibilities of how you can charge devices from your power bank.

• InstantGo 5,000 with built-in Lightning cable: 1 (1 x integrated cable)
• InstantGo 5,000 with built-in USB-C cable: 2  (1 x integrated cable, and 1 x USB-C output)
• InstantGo 5,000 wireless: 3 (1 x Wireless, 1 x USB-C output and 1 x USB-A output)
• InstantGo 10,000 with built-in Lightning cable: 2 (1 x integrated cable, and 1 x USB-A output)
• InstantGo 10,000 with built-in USB-C cable: 3 (1 x integrated cable, 1 x USB-C output and 1 x USB-A output)
• InstantGo 10,000 wireless: 3 (1 x Wireless, 1 x USB-C output and 1 x USB-A output)

You can easily adjust the volume to your choosing while setting your alarm on the Horizon 2. When setting your alarm, choose the Alarm Bell 1 or the Alarm Bell 2 on the top of the speaker. As you go through your settings when choosing an alarm time, it will give you the option to adjust the volume setting you wish to have on the alarm. Just simply adjust the volume by turning the volume knob on the top of the speaker. After you choose the volume, press the volume knob once to move to the next settings option. 
Please note: the alarm volume will gradually increase until you choose to either snooze or turn the alarm off completely. 

You must first set a radio preset by tuning to a radio station and holding down the 1, 2, or 3 button to save it. After this, the preset will be an option when setting up a new alarm.

When setting up the alarm, the options will be displayed in the following order:
​​​​​​1. Set Alarm Hour.
2. Set Alarm Minute.
3. Set Recurrence - Weekday/Once.
4. Set Ringtone - 4 built-in alarm tones or radio preset 1/2/3 (see information above).
5. Set Light - On/Off.

If the light is set to 'On' when the alarm is set up, once it goes off it will gradually increase in brightness over 10 seconds.

On backup battery power, please wait 50 seconds for the alarm to turn off automatically.

In order to skip the tracks on the Y500 headphones, slide and hold Volume Up (to skip forward) or Volume Down (to skip backwards) for 3 seconds. These buttons are located on the LEFT ear cup.

In order to power on and pair the Y500, make sure that the device you are attempting to connect to has the BT on and is in search mode. Move the ON/OFF button from its OFF position to its ON position, which is the middle of the cutout located on the RIGHT ear cup. It will remain there, and the headphones are now ON. The blue LED will start blinking, indicating that Bluetooth pairing is possible. If you need to reset the BT pairing, move the ON/OFF button against the spring load button to the opposite position of the OFF position, and keep it there for 4- 5 seconds. Now the BT system is reset, and new pairing is possible. Please Note: The Y500 features Multi-point Connectivity which allows you to switch from two different devices.

The Y500 features the speed charge (5 min charging time = 1 Hour Playtime) In order to charge the headphones, use the micro USB charger that is included in the packaging. The charging port is located at the bottom of the RIGHT ear cup. Once the headphones are charging, you will see a solid red light next to the port. Once the headphones are fully charged, the red light indicator will turn off. Please Note: You cannot use the headphones via BT while they are charging. However, you can use the headphones via audio cable while charging.

The Y500 headphones do not support Apt-X audio codec. However, they do support AAC audio codec.

In order to activate the Ambient Awareness, press the AA button which is located under the power button on the RIGHT ear cup. A confirmation sound is heard and the ambient microphones are being switched on. The volume of the music will decrease and the sounds of the outside environment will increase so you can hear what goes on around you. When Ambient Aware is activated, the Blue LED on the power button will switch to a White LED light.

AKG Warranty Information

The limited warranty begins on the original date of purchase, and is valid only on products purchased from authorized resellers in the United States and used in the United States.

 

Warranty Period: Headphones

One year

 

 

NOTE: Warranty coverage can differ by model, please refer to the warranty card included with your product to check your coverage.

 

What is covered by the AKG warranty?

Unless a different warranty period is stated in the Warranty Card provided with your AKG product, AKG warrants for a period of 1 year from the date of retail purchase by the original end-use purchaser, that this product, when delivered to you in new condition, in original packaging, from a AKG authorized reseller and used in normal conditions, is free from any defects in manufacturing, materials and workmanship. Refer to the Warranty Card provided with your AKG product for specific details including what is not covered along with other terms and conditions.

 

During the warranty period, the product or components will be repaired or replaced at AKG’s option, without charge for either parts or labor. Alternatively, AKG may decide at their sole discretion to refund the pro-rated portion of the original purchase price based on the remaining balance of the warranty period.

 

Any warranty service or replacement that is performed will not extend the original warranty period.

 

What is not covered by this warranty?

This limited warranty does not cover damage or failures that are a result of:

• Damage caused by accident, unreasonable use or neglect (including the lack of reasonable and necessary maintenance)
• Damage to, or deterioration of, any accessory or decorative surface
• Damage resulting from failure to follow instructions contained in the owner’s manual.
• Damage resulting from the performance of repairs by someone other than an authorized AKG service center
• Deterioration of component parts, the nature of which is to become worn or depleted with use such as batteries and headphone ear pads

 

How to obtain warranty service?

Before requesting a replacement, you may read through our support materials and FAQs. If your questions are not answered, please reach out to our experts for personal assistance and troubleshooting. If you still need to replace your product, please follow these steps:

 

1. Have your purchase receipt or order confirmation handy
2. Please visit our support section to fill out the warranty exchange form.

 

Press and hold Volume Up or Volume Down located on the LEFT ear cup for 3 seconds to skip forward or backward.

Move the ON/OFF button from its OFF position to its ON position, which is the middle of the cutout. It will remain there, and the headphones are now ON. The blue LED will start blinking, indicating that Bluetooth pairing is possible. If you need to reset the BT pairing, move the ON/OFF button against the spring load, to the opposite position of the OFF position, and keep it there for about 5 seconds. Now the BT system is reset, and new pairing is possible.

You can activate the Ambient Aware and TalkThru functions and assign one of them to the smart-button. AA will open the external microphones and mute the music so you can hear what is going on around you. TalkThru permits you to have a conversation with other people in the room, just by pressing the button.

You cannot disengage ANC, it is always on when the headphones are on. However, you can listen to music via cable if you do not switch the N700 on at all, which means that ANC will not be active.

The memory can support up to 8 paired devices, but only one device can play at a time on the N700NC headphones.

When the headphones are charging-Red LED When the headphones are fully charged-The red charging indicator LED turns off When the headphones are looking for a device- Fast blinking blue LED When the headphones are connected to a device-Solid blue LED

You can use the headphones while charging but only the wired connection will work. No active functions are available since they cannot be switched on.