How To

Support Overview / How To

How To

1874 results
  • What is the No. 536 power consumption for the various operational and standby modes?
    The No.536 has several operational and standby modes - the measurements below represent typical values measured at 120VAC: Mode Typical Power Consumption Notes On 210 Watts With no input or output loading Normal (standby) 4.1 Watts/100 Watts Unpon initial power-up/After first use Power Save (Standby) 4.1 Watts Green (Standby) 0.3 Watts OFF 0 Watts Via rear panel switch Note that the No. 536 cannot be shut off by the front button – this is used only for switching the amp in/out of a standby mode. Also note that when set to the Normal standby mode, the amplifier will initially consume the same power as when in the Powersave mode but will change to a higher level after it is switched on for the first time.
  • What is the maximum video resolution of the No. 40 HDMI card?
    The maximum video resolution of the No. 40 HDMI card is 1080i.
  • What is the maximum number of speakers that I can connect together via the Dual Sound feature?
    Wireless Dual Sound feature supports a maximum of two speakers. Both the GO + PLAY MINI and the other speaker must have the Dual Sound feature.
  • What is the Lexicon DD8 power output at 4 ohms?
    The same as the 8 ohm output, 125 watts/channel.
  • What is the length?
    JBL Bar 9.1 is 884 mm (without the surrounds in charging position). Surrounds add approx. 160 mm on each side, in charging position.
  • What is the latest software version available for Flip 3?
    Software version v.7.9 is the latest for the Flip 3
  • What is the function of the EQ Button in the remote app for AURA?
    The EQ Button activates a special "wide stereo sound" effect. It does not affect bass settings. Turning EQ On/Off does not reset bass level to default value. User can adjust BASS in the Bass +/- control in the APP.
  • What is the Frequency response of the Citation series?
    The Frequency response for the Citation series, except the subwoofer, is 50Hz to 20Khz.
     
  • What is the expected playing time on a fully charged battery?
    Playing time is up to 20 hours.
  • What is the distance between wall-mounts on JBL BAR soundbars
    The distance between wall-mounts centers are: JBL BAR Studio: 45 cm. JBL BAR 2.1: 70 cm. JBL BAR 3.1: 70 cm. JBL BAR 5.1: 61 cm JBL BAR 5.1 Surround: 71.85 cm JBL BAR 9.1: 55,5 cm
  • What is the difference between the Studio 2 and Arena Architectural speaker series?
    Apart from the driver materials, both the Studio 2 and Arena architectural speakers are quite the same. However, the Studio 2 series does deliver better high frequency versatility, thanks to the pivoting and level adjusting feature for the tweeter. The pivoting feature allows you to position/direct the tweeter toward the listening area. The level adjusting feature allows you to tune the high frequency (Zero to -3dB) as needed. These features are also available on select Harman Luxury Architectural speakers (Revel) as well.
  • What is the difference between the SB 250 and SB 350?
    The SB 250 has optical and auxiliary connections, while the SB 350 has both connections along with HDMI ARC. The SB 250 has the JBL SoundShift feature (one-button switch between TV and Bluetooth connection), while the SB 350 does not. Compared to the SB 250, the SB 350 has a more powerful subwoofer amplifier. The bigger amp will provide listeners with more bass response.
< 1 ... 16 17 18 19 20 ... 157 >

Can’t find what you’re looking for?

Call Us

Call Us

Talk to a product expert
Call Us now at: (877) 871-6755

Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)

Chat with Us

Chat with Us

Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)

message

Text Us

Text with a support agent via SMS at:
628-333-7807

Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)