How To
How To
1869 results
-
First time you perform the pairing, it can take several minutes to establish connection. If more than five minutes go by with no result, please switch both units OFF and ON again.Was this helpful? Thank you for your feedback!
-
Check if the tower and subwoofer’s LEDs are in solid white color. A blinking LED means a disconnection. In this case, hold RESET on the back of the tower or subwoofer for 5 seconds to enter pairing mode. On the touchscreen, tap “Speaker Setup” > “Pairing” > “Tower Setup” or “Subwoofer pairing”, then follow the onscreen instructions to pair with the digital hub again.Was this helpful? Thank you for your feedback!
-
In most cases when a Computer/PC/Laptop has issues connecting to a Bluetooth device (Portable speaker, Headphones, Active speakers), it's caused by your Computer/PC/Laptop's Bluetooth driver (software).
The driver (software) should support the following Bluetooth protocols, to be able to play music/sound from your Computer/PC/Laptop:
• A2DP (Advanced Audio Distribution Profile) driver for your Computer/PC/Headphones to transfer music.
• AVRCP (Audio/Video Remote Control Profile) driver to send skip/forward/pause/play music to your device
Always get the latest driver version available for your Computer/PC/Laptop.
To download the correct driver (software), visit the manufacturer's website of your Computer/PC/Laptop. They usually have a "Support/Download" section where you can find the correct driver. Otherwise, we advise you to contact their support.Was this helpful? Thank you for your feedback! -
Try a manual pairing of the headset and the dongle.
Hold the power button in the "On" position for 5 seconds on the headset, and then hold the button on the dongle for 5 seconds. This should force a manual pairing, allowing the PC to again recognize the headset.
Be sure to check multiple USB ports (to confirm it’s not an issue with the USB port).
If the dongle can’t be manually paired either, please contact customer support.
Was this helpful? Thank you for your feedback! -
To power on and pair the headphones, remove the ear tips from the charging case. If this is your first time using the headphones, they will automatically go into pairing mode. You will see the blue and red LED light flash on the RIGHT and LEFT ear as it attempts to pair with your device. Make sure your device is in range and BT settings are ON. The JBL True Wireless Flash X should pop up on your list of discoverable devices within 3-5 seconds, tap and connect. Once connected, you will see a slow blinking blue light below the UA logo on the RIGHT and LEFT Ear. This headphone allows you to use the ear tips in Stereo or Mono mode. If you wish to just use the LEFT or RIGHT ear, simply place the ear tip you do not wish to use back in the charging case.Was this helpful? Thank you for your feedback!
-
Every person has different preferences for wall mounting products. Nevertheless, we tried out varies options and found this to be the place for optimal sound performance.
- Use the included "Wall-mount guide" that came with your LINK BAR.
- From the down edge of your TV screen, measure 50mm (using the guide for the screws) or 5 cm or 2 inches depending on the country.
- It will perfectly align the LINK BAR close to your TV and give the best performance.
These are our recommendation if you want to place it further down, be our guest!
The sound and performance will still be magnificent!Was this helpful? Thank you for your feedback! -
Although both speakers have the same tweeter and woofer, because the Arena 170 has a larger cabinet, it will produce deeper bass. This also means that the Arena 170 can handle more power, versus the Arena 130 speakers. Please see product spec. sheet and/or manual for more details.Was this helpful? Thank you for your feedback!
-
While the speaker provides a single wireless microphone in the box, it has the ability to work with two wireless microphones. Some units will include Mic A, while others will have Mic B. If you are looking to order the second mic, you must first determine which mic you already have.
- Power on the microphone.
- Long press the Power button. The mic will power off. Keep pressing the button until the mic shows the version.
- 6A08 = Mic A. You will want to order Mic B. Part #050100-000014
- 6B08 = Mic B. You will want to order Mic A. Part #02-UMI033-XX0
- Please call 1-800-336-4JBL (4525) to place your order.
Was this helpful? Thank you for your feedback! -
Yes, the 8 hours time is for conference calls and music playback, but will of course depend on volume level and music content.Was this helpful? Thank you for your feedback!
-
Yes, this is correct. In order to minimize interference between speaker and microphone during telephone conversations, one speaker unit is deactivated.Was this helpful? Thank you for your feedback!
-
- Try to disconnect some devices from your Wi-Fi network. Some routers may have weak performance, which can cause issues and poor connection to all devices in your network. - If your router supports 5Ghz ( 802.11N or AC ) and you have devices that are capable of using 5 GHz Wi-Fi then switch to that specific network for best performance. - If you have a lot of ( Legacy / older than 5 years ) devices on 2.4GHz network, try limiting them to max. 6 connected simultaneouslyWas this helpful? Thank you for your feedback!
-
Answer phone or 1x Play/Pause 2x Skip next 3x Skip previousWas this helpful? Thank you for your feedback!
Can’t find what you’re looking for?
Call Us
Talk to a product expert
Call Us now at:
(877) 871-6755
Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)
Chat with Us
Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)
Text Us
Text with a support agent via SMS at:
628-333-7807
Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)