How To

PARTYBOX CLUB 120

Software Update Release Notes

------------------------------------------------------------------------

Version:  1.9.0

Release Date: June 28, 2024

Release Media: OTA (over the air) Update through JBL PartyBox App

 

What’s New

1. Seamlessly connect with previous PartyBox models (710/310/110/Encore/Encore Essential)
2. Enhance multi-speaker connection performance
3. Add new random lightshow pattern

------------------------------------------------------------------------

Version:  1.6.0

Release Date: April 9, 2024

Release Media: OTA (over the air) Update through JBL PartyBox App

 

What’s New

1. Lightshow Improvement
2. Bug fix and performance improvement

PARTYBOX ENCORE ESSENTIAL

Software Update Release Notes

------------------------------------------------------------------------

Version:  1.31.0

Release Date: September 12, 2023

Release Media: OTA (over the air) Update through JBL PartyBox App

 

What’s New

1. Android 13 connection improved
2. Add feedback tone on/off feature

PARTYBOX STAGE 320

Software Update Release Notes

------------------------------------------------------------------------
Version:  2.0.0
Release Date: July 3, 2024
Release Media: OTA (over the air) Update through JBL PartyBox App
 
What’s New

1. Seamlessly connect with previous PartyBox models (710/310/110/Encore/Encore Essential)
2. Enhance multi-speaker connection performance
3. Add new random lightshow pattern

------------------------------------------------------------------------

Version:  1.6.0

Release Date: April 9, 2024

Release Media: OTA (over the air) Update through JBL PartyBox App

 

What’s New

1. Lightshow Improvement
2. Bug fix and performance improvement

It is possible to pair two of the same model of JBL PartyBox speakers together through TWS (True Wireless Stereo) mode.

PartyBox On-The-Go*/On-The-Go Essential*/100:
Connect just the left PartyBox with the chosen device first, with the right PartyBox turned off. The speaker that is connected first will automatically be the left channel. Now turn the right PartyBox on and continue with TWS pairing (detailed below).

*The PartyBox On-The-Go and PartyBox On-The-Go Essential are compatible with each other in TWS mode.

PartyBox 200/300/1000:
A button (L/R) on the rear of the speakers is used to assign the correct channel to the speakers after pairing is made.
In order to activate TWS mode, press and hold the Bluetooth button on the first speaker until the notification chime sounds, about 5 seconds. Then press and hold the Bluetooth button on the second speaker until the notification chime sounds (as seen below). TWS mode is now activated. To disable TWS, press and hold the Bluetooth button on either speaker, or power off one speaker.

Partybox 110/310/710/Encore/Essential:
Press the buttons labelled TWS on both speakers to connect the speakers in TWS mode (pictured in item 2 in the image below, with two speakers on the button).

TWS can be activated and deactivated remotely in the JBL Partybox app, in addition to assigning the left and right channels to the correct speakers.
Once the TWS connection is setup, it will be in Stereo mode by default if both speakers are the same model, otherwise the speakers will be in Party mode by default if different Partybox models are used. You can also switch between Stereo and Party mode in the JBL PartyBox app if two of the same Partybox models are used.

Please note: In order to achieve TWS mode, the speaker must be the same model with the exception of the PartyBox 200 & PartyBox 300, and PartyBox On-The-Go & PartyBox On-The-Go Essential which can be paired together via TWS. You cannot achieve TWS with a PartyBox 1000 and a PartyBox 300. You cannot achieve TWS with a PartyBox 100 and PartyBox 200. However, it is possible to connect a maximum of two of either the JBL PartyBox app compatible models (PartyBox 110, 310, 710, Encore or Encore Essential) together in Party mode - the two speakers then do not need to be the same model, but Stereo mode will not be possible.

PARTYBOX ULTIMATE

Software Update Release Notes

------------------------------------------------------------------------

Version:  24.23.53.70.00

Release Date: July 1, 2024

Release Media: OTA (over the air) Automatic Update

 

What’s New

1. Add support for ambient sound through the Moment Button
2. Performance improvement

------------------------------------------------------------------------

Version:  24.15.37.70.00

Release Date: April 17, 2024

Release Media: OTA (over the air) Automatic Update

 

What’s New

1. Stability & performance improvement

------------------------------------------------------------------------

Version:  23.50.23.70.00

Release Date: December 29, 2023

Release Media: OTA (over the air) Automatic Update

 

What’s New

1. Fixed microphone distortion issue when being used in Daisy Chain Mode
2. Software Update optimized

Party Mode allows for a soundbar to have a simultaneous connection of up to two Bluetooth® devices.

Notes:

- When the soundbar is turned off, it will only connect the

device with the latest action automatically. You will need to manually

connect the second device.

 

- The maximum amount of devices to be connected at a time is 2. The last action on one of

the devices will always take the control.

 

- A third device will not be able to see the soundbar speaker’s name on the list of available Bluetooth devices when there are already 2 phones are connected.

Personi-Fi 2.0 is a feature available through the Headphones App for select models. This feature helps to personalize the sound using the best possible sound curve based on your hearing capabilities. It will first ask a few questions, and then check your current ambient audio. You will be informed that this step should be completed in a quiet environment. It will play a series of test tones in all the different frequencies wherein after each frequency test tone is played, it will ask you what is the lowest volume setting you can hear. Nine different sounds will be played in each ear (18 in total).

Simply press and release the button when you hear a sound. After it goes through all the test tones, it then calculates the best sound for your ears based on the results. It allows you to demo the results by playing a track. You will be able to toggle it on/off to hear the difference.

The JBL Quantum 350 Wireless headset is compatible via 2.4GHz wireless connection with:

• PC
• PlayStation
• Mac
• Nintendo Switch.

The JBL Quantum 100 is compatible with PC, PlayStation, Xbox, Nintendo Switch, Mobile, Mac and VR.

The JBL Quantum 200 is compatible with PC, PlayStation, Xbox, Nintendo Switch, Mobile, Mac and VR.

This product supports up to 10 hours of audio playtime. Please note that battery life may vary depending on volume level and content. 

The compatibility for JBL Quantum models on PlayStation 5 is the same as it is for PlayStation 4 models.
 All JBL Quantum headset models work through 3.5mm audio jack (aux) connected to the PlayStation controller. USB models will also work on PlayStation. In addition, the wireless models works wirelessly when connected to the 2.4GHz USB dongle.

Please note: JBL QuantumENGINE is only available on PC. Custom lighting can be set up on PC, and will carry over when connected with USB cable or 2.4GHz USB dongle. 

Press and hold the power button located on the RIGHT ear cup. Make sure that the device is on and in Bluetooth range. If this is the first time connecting the device, it will automatically go into pairing mode. You will notice the LED light alternate between blue and white as it searches for a device to connect to. The headphones should pop up on your list of discoverable devices within 3-5 seconds, and connect.

Locate the power button on the back of the right ear cup. Gently slide the spring loaded power button up and release. Once turned on, it will display a solid white light. If this is your first time powering on the device it should automatically go into pairing mode, and will display a fast blinking blue light. Make sure the device you are attempting to connect to is in search mode. The headphones should pop up on your list of discoverable devices within 3-5 seconds, and connect. If you are attempting to pair to a different device, make sure headphones are turned on, and press and hold the Bluetooth button located at the bottom of the right ear cup. The headphone should display on your new device within 3-5 seconds on your list of discoverable devices.

Power off pushed, or device inactive for more than 15 minutes, or battery below 5% capacity.

To increase battery life on your Quantum headphones, turn off your RGB lighting as this will help increase the wireless playback time. You can turn off the RGB in the QuantumENGINE or press and hold the mute button on the headset. 

With some of the new mobile devices, pressing the Play/Pause button seems not to work, as devices require longer time to receive confirmation of the action. Please check on the JBL Control X wireless top panel LED indication that the command is received and acknowledged before pressing the Play/Pause command again. It can result in having to press the button two times quickly to activate the proper command before command acknowledgement times out.

Only the primary speaker prompts the user when pressing the association button. This does not happen when the same is done on the secondary speaker. However, the front panel LED blinks quickly, indicating that association process is taking place. (This applies to primary and secondary speakers both.)

Reset the Soundbar by the same process as when doing "reset remote settings": 1. Switch the SB 350 ON. 2. Press and hold the Surround and Volume (–) buttons simultaneously for about 3-4 seconds, then let go. The Source selection Button flashes amber, followed by the power button and source buttons flashing several times. 3. The soundbar is now reset.

If you are experiencing issues when setting up your HK Citation Oasis to your WiFi network using the Google Home app, then please turn Bluetooth off on your phone, then turn Bluetooth back on again and try the setup again.

This was done to strike a balance between functionality and ease of use. More than three button pushes on the Smart Button could be annoying to the user, so three settings were chosen: Off, Low (optimized for office settings) and High (optimized for outdoor settings).

The intensity of the light show is dependent on the amount of audio signal being sent into the unit.

If you are experiencing a light show that doesn't move around very much, it is likely that you are not using a feature on your phone called Bluetooth Absolute Volume*. This means that the volume of your phone/tablet/device is controlled independently from the volume of the speaker.

So, if you have the Pulse 4 set to maximum volume or close to it, but the volume on your device is set at a low level, the light show will show little to no effect. All you have to do is reverse it. Turn up the volume on the device to the maximum and set the Pulse 4 to the desired volume. This will send the correct level to the speaker and the light show will show plenty of effect. This also benefits the sonic quality as well. Therefore, we recommend always having the volume on your device turned up to a high level and then adjusting the volume level on the speaker itself. This way you'll be able to enjoy the light show while also getting good audio quality. Or, if possible, setup your device for Bluetooth Absolute Volume*.

*BLUETOOTH ABSOLUTE VOLUME: Most phones/tablets/devices now use Bluetooth Absolute Volume (a.k.a. volume sync) by default. This is a feature that synchronizes the volumes of the device and the speaker, and allows the speaker volume to be controlled by changing the volume on either the device or the speaker. The volume being sent from the device is fixed at full volume.

A new firmware version has been released for the Pulse 4 (Version 0.5.1.0), below is a list of the improvements:

1. Supports Bluetooth 5.1 profile.
2. Improves the stability of stereo setup using the JBL Portable* app.
3. Improves compatibility with Mac computers.
4. Enhances light show synchronization with music.

The firmware update is installed as an OTA update:

1. Download and install the JBL Portable* app from the Google Play/App Store.
2. Connect your Pulse 4 to your phone/tablet through Bluetooth.
3. Open the JBL Portable app and wait for the Pulse 4 to appear.
4. On the Pulse 4 screen, select settings (gear cog symbol).
5. Proceed with installing the firmware update.

*JBL Portable is the new name for the JBL Connect app, the name will change in January 2021.

Press and hold the Light Show & Bluetooth buttons together for > 2 seconds.

QUANTUM 350

Software Update Release Notes

------------------------------------------------------------------------

Version:  1.4.4

Release Date: Nov 22, 2023

Release Media: OTA (over the air) Update via JBL Quantum Engine

 

What’s New

1. Add EQ store feature that retains EQ changes made in Quantum Engine

QUANTUM 360X & QUANTUM 360P

Software Update Release Notes

------------------------------------------------------------------------

Version:  3.6.5

Release Date: June 20, 2024

Release Media: OTA (over the air) Update via JBL Quantum Engine

 

What’s New

1. Add compatibility with JBL Headphone app for both iOS & Android devices

------------------------------------------------------------------------

Version:  2.3.0

Release Date: November 22, 2023

Release Media: OTA (over the air) Update via JBL Quantum Engine

 

What’s New

1. Add EQ store feature that retains EQ changes made in Quantum Engine

 

QUANTUM 810

Software Update Release Notes

------------------------------------------------------------------------

Version:  2.3.1

Release Date: Nov 6, 2023

Release Media: OTA (over the air) Update via JBL Quantum Engine

 

What’s New

1. Improved firmware stability

QUANTUM DUO
Software Update Release Notes
------------------------------------------------------------------------
Version:  V46
Release Date:  August 31, 2022
Release Media:  USB
Filename:  JBL Quantum Duo SW release V46.zip

What's New

1. We have improved the volume synchronization between the Quantum DUO and Windows OS, which give the user a better sound experience

------------------------------------------------------------------------
------------------------------------------------------------------------

QUANTUM DUO
Software Update Release Notes
------------------------------------------------------------------------
Version:  V44
Release Date:  December 15, 2021
Release Media:  USB
Filename:  JBL Quantum Duo SW release V44.zip

What's New

1. Allow user to disable the auto standby feature via long pressing lighting pattern and right color selection button for >10 seconds
2. General Software Improvements

QUANTUM ENGINE
Software Update Release Notes
------------------------------------------------------------------------
Software Version:  V1.2.8 (MAC only)
Release Date:  July 8, 2024
Release Media:  Apple Store

What’s New

1. Improve FW upgrade stability for Quantum 810, Quantum 910, Quantum 910P & Quantum 910X

------------------------------------------------------------------------
Software Version:  V1.19.0.2025
Release Date:  June 20, 2024
Release Media:  Website & Quantum ENGINE

What’s New

1. Extend support for Quantum 50C & Quantum 360 Wireless
2. Add max volume indicator feature for Quantum Stream Wireless
3. UI improvements for better user experience

------------------------------------------------------------------------
Software Version:  V1.18.0.1985
Release Date:  January 5, 2024
Release Media:  Website & Quantum ENGINE

What’s New

1. UI improvements for better UX
2. Add support for Quantum Stream Studio & Quantum Stream Wireless

------------------------------------------------------------------------
Software Version:  V1.11.0.1511
Release Date:  September 19, 2022
Release Media:  Website & Quantum ENGINE

What’s New

1. Improved firmware stability upgrading process flow for the QUANTUM 910.

------------------------------------------------------------------------
Software Version:  V1.11.0.1510
Release Date:  August 24, 2022
Release Media:  Website & Quantum ENGINE

What’s New

1. Added support for the new QUANTUM 910 Wireless Headphones
2. Over 30 improvements addressing user interface, usability, and stability of the app for a better user experience.

QUANTUM STREAM

Software Update Release Notes

------------------------------------------------------------------------

Version:  1.3.3

Release Date: June 21, 2024

Release Media: OTA (over the air) Update via JBL QuantumENGINE

 

What’s New

1. Fixed RGB-lighting setting being saved correctly
2. Fixed volume increasing sporadically
3. Changed manufacturer name to "Harman International Inc" on MacOS