How To

Support Overview / How To

How To

1847 results
  • The max power output for our chargers
    For 20W charger, the max. power output is 20W total.
    For 30W charger, the max. power output is 30W total.
    For 65W charger, the max. power output is 65W total.
    For 100W charger, the max. power output is 100W total.
    For 30W, 65W and 100W chargers, when charging more than one device simultaneously, total max. power output is 30W, 65W and 100W, respectively. You can also check detailed power output information from specification on product page.
  • The Max power output for our power banks
    For 5,000 models, the Max power output is 18W total.
    For 10,000 models, the Max power output is 30W total.

    It means when charging more than one device simultaneously, total max. output is 18W for 5,000 models and 30W for 10,000 models.
    You can also check detailed power output information from the specification on the product page.
  • The Noise Cancellation we are using in our JBL TOUR Series
    True Adaptive NC available on Tour One enables real-time monitoring of exterior surroundings and personal attributes like movement, hair, eyeglasses, and automatic adjustments to the NC performance and EQ.

    If you don’t prefer the canceling performance's automatic change, you can get a fine-tuned canceling level by choosing “Everyday Mode” in the app.

    Adaptive Noise Cancelling - available on Tour Pro+ TWS - listens to ambient environmental noises using external and internal mics then creates the inverse phase back to the listener creating the noise “canceling” effect.
    The headphones also allow the listener to adapt or adjust noise cancellation through features like Ambient Aware and TalkThru.
  • The P and S speaker won't be associated successfully when pressing the association button twice on the primary speaker.
    Make sure to press the association button once. If by mistake you pressed it more than once, there is a good chance that association does not take place. Wait until the association process is completed, which takes about 2 minutes, and repeat the process.
  • There are times when my smart phone stops charging when attached to the wireless charge arm on Smartbase.
    This can be caused by the charge arm reaching its thermal temperature cutoff. This is a safety feature to prevent a potential risk. For proper heat dissipation, always be sure to have the charging arm in the open position when your smart phone is attached.
  • There are two kinds of remote cables for the Synchros series. How do you tell them apart?
    The three JBL Synchros on-ear and over-ear headphones S300, S500 and S700 all have cables with remote control on them. There are two types of remote controls. One is for iPhones mainly. It has white dividing rings between the poles of the jack plugs. The other one is for Android phones. It has black dividing rings between the poles of the jack plugs. This is shown in the owner's manuals as a drawing. The S300 comes in two models, S300i and S300a. They are of course meant for iPhones and Android, respectively. You should either buy the i or the a version, to match the phone you have. But since the difference is only in the remote control on the cable, it is always possible to buy the alternative cable later, as long as they are in stock as spare parts. The S500 and S700 have BOTH cables in the box, so there is no i and a version of these models.
  • There are two small holes on top of my JBL LINK 10, 20, 300 or 500 speaker. What are these?
    These holes are the microphones for the JBL Link
  • The reason for the LEDs is orange
    If your LINK BAR has 4 orange LED lights in the front, this means you have "muted" the microphone which is located on the top of the speaker.
    To unmute the LINK BAR use the "switch" and the front LEDs will stop illuminating orange. Now you can use the hot-words to interact with the Google Assistant/Google Search (varies from country).

    Privacy information:
    We call our button the "PrivacySwitch" for the moments when you don't want the bar to listen for the hot words.
    Google has high privacy rules, and one of them is not to share end-user data with any third-party apps.
     
  • The recommended operating temperature for Chargers
    For InfinityLab charger, the recommended operating temperature is between 0-45°C.
    Our chargers provide auto protection against overheating as well as overcurrent/overvoltage conditions.
    Therefore, when the operating temperature is outside the range, this charger will auto adjust the output powers to protect itself and your devices.
  • There is an upgrade socket on the back panel. How is this socket used, and which kind of cable must I buy to use it?
    Although the owner's manual states that owner can use this connector for home upgrade procedure, this is not so. The USB-connector used cannot be bought in commercially available cables, and the port must be considered for technician's use only.
  • There is an upgrade socket on the back panel. How is this socket used, and which kind of cable must I buy to use it?
    Although the owner's manual states that owner can use this connector for home upgrade procedure, this is not so. The USB-connector used cannot be bought in commercially available cables, and the port must be considered for technician's use only.
  • There is a small, oval dot on the inside of one of the ear cups. Is this used for anything?
    This is the charging indicator LED. I lights up red when the headphone is charging, and goes dark when charging is complete, or if no charging takes place.
  • There is a switch on the back panel of my SB450 which says "EQ - Wall Or Table". What is it for?
    As explained in our Owner's manual, it will adjust the sound to match the placement of your Soundbar, wall or table. When against a wall, the sound reflection will be different than when on a table. This button adjusts the tonal quality to give you the best audio results in either setup.
  • There is no audio through HDMI when I'm using the internal apps (Netflix, Pandora, etc) of my TV.
    Verify your TV supports the ARC feature.Make sure you enable the external speakers/ARC/digital audio output on your TV, this varies by TV manufacturer. Set the AVR1x1S to the TV input. Go into the AVR menu settings and under System Settings, make sure Audio Return Channel is set to Auto and set the TV Control to on.
  • There is no picture sometimes, and white noise on my TV using SB450.
    This is due to your HDMI cables. All cables attached to the HDMI inputs of the SB450, needs to be High speed cables. If your cables do not meet these requirement, then you will experience unstable connection from source to your TV.
  • There is no sound from my soundbar. How do I fix it?
    Common fixes:
    (1) Make sure that the soundbar is not muted.
    (2) Select the correct audio input source on the remote control.
    (3) Check the connections to your TV or other devices
    (4) Perform a reset if none of the above is working. 
    (4.1) Press and hold VOL -, VOL +, and Source buttons to perform a reset.
     
  • There was a printing error with my Personalized Product. How can I get it re-printed?
    If you suspect a printing error, please contact our Customer Support team. We will ask you take a photo of your Personalized Product. Then we can compare this to the confirmed order image. If the issue is verified, we will provide further instructions to have your Personalized Product re-printed.
  • The setup process fails with a device running Android 7.0 or higher for my OMNI+ speaker, how can I make it connect?
    If you experience a problem with setup using an Android 7.0 or higher device, please perform the following steps: First, force stop the HK Controller app from running in background. Second, go to your phone or tablet Wi-Fi settings, find the Omni speaker setup Wi-Fi network, and select “Forget Network”.Third, reopen the HK Controller app and begin the setup process again. After performing these steps, you will be able to complete the setup process for your speakers.
  • The shape of yurbuds appears different and larger than the earbuds I am familiar with, can you explain more about how they fit and if and why they are comfortable?
    The ergonomics of yurbuds sport earphones are indeed different and it is that unique design that creates the TwistLock™ and the guarantee that they will not fall out nor hurt. Our development team studied the human ear, and, as athletes, we know the demands on sport earphones. The results of that research are yurbuds. We encourage you to explore the various offerings on jbl.com.
  • The sub does not connect to the sound bar.
    Move the sub closer to the SOUNDBAR for testing and see if the signal picks up. 1: Turn off any wireless routers or devices that run on 2.4ghz signals, such baby monitors, cordless phones, etc. and test to see if the subwoofer connects. 2: Test with a movie or music with a lot of action scenes or bass. If it's just dialogue, you may not hear the subwoofer.
  • The subwoofer in my BDS system switches off when I play softly. Can I prevent this from happening?
    Yes, by using the manual setup procedure it is possible to increase the signal volume level to the subwoofer, while reducing the level on the subwoofer itself. The reason it switches off is that the standby sensing circuit cannot sense music when the level is very low. By increasing the volume to the subwoofer and reducing its output on the sub itself, the signal sensing circuit has a better chance of recognizing an incoming signal, preventing the sub from switching off.
  • The top capacitive buttons are sensitive and cause lots of miss-triggering, what can I do?
    When you press the power button you will hear a “door locked” tone. This means the top capacitive touch buttons have been locked. At this point you cannot trigger them. With another short press of the power button, you will hear a “door unlocked” tone, which means the top capacitive touch buttons have been unlocked.
  • The volume level on my headphones is very quiet
    If your volume level is quiet, make sure that the TalkThru is not activated on your headphones. In order to deactivate or activate TalkThru, quickly press the ANC button located at the top of the LEFT ear cup. You will hear an audible voice stating, TalkThru On when activated, and 'ANC On' when deactivated.
  • The Wireless charging speed
    The InifilityLab power bank is Qi-certified for a maximum of 10W of Qi wireless charging.
    Your device should support Qi charging, and the actual wireless charging speed may vary depending on the device.

    For example, iPhone 11 Pro supports Max 7.5W Qi charging, and Samsung Galaxy S21 supports Max 15W QI charging.  

    Check your device details to know how much power it can receive. 
  • Tour One: Firmware Update V3.3.0
    There is a firmware update for the Tour One headphones, release notes below.

    What’s New:
    1. Optimize ANC performance at mid-range around 1kHz.
    2. Optimize a few minor pop noises.
    3. Fixed a few minor SW bugs.
    4. Optimize the UI behavior.
  • TOUR ONE M2: Software Update Release Notes

    TOUR ONE M2

    Software Update Release Notes

    ------------------------------------------------------------------------

    Version:  5.5.0

    Release Date: November 15th, 2024

    What’s New

    1. Add Auracast support
    2. Stability and performance improvements


  • TOUR PRO 2: Software Update Release Notes

    TOUR PRO 2

    Software Update Release Notes

    ------------------------------------------------------------------------

    Version:  5.7.0 (earbuds)

    Release Date: June 3, 2024

    Release Media: OTA (over the air) Automatic Update through JBL Headphone App

     

    What’s New

    1. Add support for Google Find My Device
      1. Find My Device for your headphones can be enabled through the Google Find My Device app, which is available on the Google Play Store

    ------------------------------------------------------------------------

    Version:  1.5.9 (charging case)

    Release Date: February 22, 2024

    Release Media: OTA (over the air) Automatic Update through JBL Headphone App

     

    What’s New

    1. Resolve charging case time display error when iPhone country is set to Thai

    ------------------------------------------------------------------------

    Version:  1.5.7 (charging case)

    Release Date: December 15, 2023

    Release Media: OTA (over the air) Automatic Update through JBL Headphone App

     

    What’s New

    1. Performance improvement
     

     

  • Track Control
    To pause/play music, tap center button on right or left ear for 1 second. To skip tracks forward, DOUBLE CLICK the center button on right or left ear. Unfortunately, you cannot skip tracks backward.
  • Track Control Information
    To skip tracks forward, double click the PAUSE/PLAY to advance to the next track. Please note: You can only skip tracks forward. This speaker does not have the capability to skip to the previous track.
  • Trouble accessing the Google Assistant or Amazon Alexa on your Headphone
    First, ensure that you have the Google Assistant or Amazon Alexa apps installed on your device, depending on the voice assistant you want to use. Go to your app store to download the intended voice assistant app, then add your headphones as a device in the app if necessary. Finally, enable the intended voice assistant in the settings of the My JBL Headphones app and assign which earbud you want to use to control it. The voice assistant app must be open for it to work correctly. It can be opened from within the My JBL Headphones app by tapping the name of the required voice assistant after you have selected it for use and assigned a gesture to one of your earbuds to control it.
< 1 ... 47 48 49 50 51 ... 62 >

Can’t find what you’re looking for?

Call Us

Call Us

Talk to a product expert
Call Us now at: (877) 871-6755

Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)

Chat with Us

Chat with Us

Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)

message

Text Us

Text with a support agent via SMS at:
628-333-7807

Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)