How To
How To
1847 results
-
The UA Pivot headphones comes with 3 different ear tips and enhancers to ensure the best fit!Was this helpful? Thank you for your feedback!
-
From a full charge, you can expect up to 9 hours of playback time.Was this helpful? Thank you for your feedback!
-
Locate the power button on the controller. Hold the power button up for 2-3 seconds and release. Once turned on, it will display a solid blue light. If this is your first time powering on the device it should automatically go into pairing mode, and will display a fast blinking blue and red light. Make sure the device you are attempting to connect to is in search mode. The headphones should pop up on your list of discoverable devices within 3-5 seconds, and connect. Once connected, you will see a solid blue light above the power button.Was this helpful? Thank you for your feedback!
-
TalkThru Technology allows you to clearly hear others for quick conversations without removing your UA Pivot headphones. To activate TalkThru mode, press the Bionic Hearing button on the controller once. You will hear a tone, and your music level will lower when TalkThru Technology is engaged. To revert back to normal volume, simply press the Bionic Hearing button again.Was this helpful? Thank you for your feedback!
-
To skip tracks forward, press and hold the volume + for 2 seconds. To skip tracks backward, press and hold the volume - for 2 seconds. To pause/play the track, press the center button for 2 seconds.Was this helpful? Thank you for your feedback!
-
You will be able to control the volume by pressing the volume + and volume- buttons located on the controller.Was this helpful? Thank you for your feedback!
-
Yes. The UA React features an IPX7 rating which offers full protection from sweat and water. They can be fully submerged for up to 30 minutes.Was this helpful? Thank you for your feedback!
-
AmbientAware Technology allows you to hear your surroundings without removing your UA React headphones. To activate AmbientAware mode, double press the Bionic Hearing button on the controller. You will hear a tone, and your music level will lower when AmbientAware Technology is engaged. To revert back to normal volume, simply double press the Bionic Hearing button again.Was this helpful? Thank you for your feedback!
-
The UA React headphones do not support AptX™ and AptX HD™ audio codecs.Was this helpful? Thank you for your feedback!
-
To receive a call, press the power/pairing button on the controller for 1 second.Was this helpful? Thank you for your feedback!
-
As the headphones are charging, you will see a red solid light indicator on the controller. Once the unit is fully charged, the red light will turn off.Was this helpful? Thank you for your feedback!
-
The UA React headphones comes with 3 different ear tips and enhancers to ensure the best fit!Was this helpful? Thank you for your feedback!
-
Locate the power button on the controller. Hold the power button up for 2-3 seconds and release. Once turned on, it will display a solid blue light. If this is your first time powering on the device it should automatically go into pairing mode, and will display a fast blinking blue and red light. Make sure the device you are attempting to connect to is in search mode. The headphones should pop up on your list of discoverable devices within 3-5 seconds, and connect. Once connected, you will see a solid blue light above the power button.Was this helpful? Thank you for your feedback!
-
TalkThru Technology allows you to clearly hear others for quick conversations without removing your UA React headphones. To activate TalkThru mode, press the Bionic Hearing button on the controller once. You will hear a tone, and your music level will lower when TalkThru Technology is engaged. To revert back to normal volume, simply press the Bionic Hearing button again.Was this helpful? Thank you for your feedback!
-
You will be able to control the volume by pressing the volume + and volume- buttons located on the controller.Was this helpful? Thank you for your feedback!
-
Yes. The UA React features an IPX7 rating which offers full protection from sweat and water. They can be fully submerged for up to 30 minutes.Was this helpful? Thank you for your feedback!
-
The headphones feature a Speed Charge battery which allows you to receive a full hour of playback time after only charging the headphones for 5 minutes. To receive the full 12 hours of audio playback, it typically takes 1.5 hours of charging time.Was this helpful? Thank you for your feedback!
-
Press and hold the circle power button for 3-5 seconds. This will be located on the LEFT arm of the neckband. We recommend having one or both ear tips in your ear to listen to the audio commands. Continue to press and hold until you hear the audible voice stating, “powering on.” If this is your first time powering on the headphones it will automatically go into pairing mode in which you will hear the audio voice prompt stating “looking for device”. Make sure that the device you are attempting to connect to is in the Bluetooth search mode and within range. UA | JBL Flex should appear on your device within 3-8 seconds. Once you choose this option on your discoverable devices, it will connect and the voice prompt will state “Connected. “ To power off the headphones, press and hold the circle power button for 2-3 seconds or until you hear the audible voice state, “Powering Off”Was this helpful? Thank you for your feedback!
-
To skip the track forward, press and hold the volume up button. (+) If you want to skip backward, press and hold the volume down (-) The volume buttons are located on the RIGHT arm of the neckband.Was this helpful? Thank you for your feedback!
-
The device is charged by a standard micro USB charger. To charge the unit, gently pull out the rubber cover just below the light indicator on the left side of the inline mic. You will see the the charging cable end.Was this helpful? Thank you for your feedback!
-
To receive a call, press the center button located in between the volume- and volume+ button for 1 second.Was this helpful? Thank you for your feedback!
-
To use the headphones, they cannot be charging. You should receive 16 hours of battery life. The UA Train also features the quick charge battery which allows you to receive 1 hour of battery life after charging for 5 min.Was this helpful? Thank you for your feedback!
-
Yes, The UA Train ear cushions can be removed and washed. To remove the ear cushions, peel cushion away from ear cup center. Hand wash the ear cushions only with liquid soap for 5 minutes. Swish in soapy water, then swish through clean water until there are no more soap suds. Wait for ear cushions to fully dry, and gently stretch the cushion, inserting the cushion ring into the ear cup slot, and working your way around. Rotate until the L or R indicator is in the correct position.Was this helpful? Thank you for your feedback!
-
Talk Thru technology allows you to clearly hear others for quick conversations without removing your UA Train headphones. To activate TalkThru mode, press the UA logo on the RIGHT ear for 1 second. You will hear your music level lower when TalkThru Technology is engaged. To revert back to normal volume, simply press the UA logo again. (Please note TalkThru does not function when using cable connection.)Was this helpful? Thank you for your feedback!
-
Press and hold the power button for 3-5 seconds, it will power on/off the TRIP. Short press on the power button will lock and unlock top capacities touch buttons on the TRIP. Be sure to hold the button for 3-5 seconds to ensure you are powering on/off and not controlling the touch buttons.Was this helpful? Thank you for your feedback!
-
Software updates for your speaker can be done using the JBL Portable app.
Download it from the Apple App store and Google Play store.
If there is an available update, look for the small red dot above the gear icon and follow the download instructions (see image below).
If you have an issue with your device it is always worth checking if there is a Software update available and performing the installation if there is.Was this helpful? Thank you for your feedback! -
Please avoid the use of USB splitters and extenders built into screens etc. Dropouts in sound and lack of signal from the microphone in headsets may be the result. If possible, always connect directly to the computer, or use a single extension cord.Was this helpful? Thank you for your feedback!
-
It is possible to connect a wireless Citation Sub or Sub S to the Citation Amp.Was this helpful? Thank you for your feedback!
-
To use Chromecast on a SmartThings compatible speaker, proceed with the following steps:
- Go to the speaker's page in the SmartThings app.
- Go to "Third Party Services".
- Tap "Chromecast built-in".
- Tap "enable".
- Open a Chromecast enabled app on your smartphone or tablet.
- Play music.
- Press the Chromecast icon.
- Select the Chromecast compatible speaker.
Was this helpful? Thank you for your feedback! -
The TV input is a single audio input with different options for connectors. If an HDMI cable is connected, then it will always be prioritized. Optical and coaxial digital will be prioritized by first signal present (Be aware, that some optical outputs will register as signal always)
It is not possible to change between the digital inputs for TV source via the remote control.Was this helpful? Thank you for your feedback!
Can’t find what you’re looking for?
Call Us
Talk to a product expert
Call Us now at:
(877) 871-6755
Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)
Chat with Us
Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)
Text Us
Text with a support agent via SMS at:
628-333-7807
Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)