How To

Support Overview / How To

How To

1847 results
  • Using InfinityLAB Charger outdoor or in wet environment
    The InfinityLAB charger is not designed for wet environment.
    It is not waterproof, if it gets wet, there's a chance for short-circuit, which can cause damage to other electronics that you plug into them.
    Ensure that you keep your charger always dry.
  • Using InfinityLab Power bank as a carry-on item during flights
    Normally, batteries under 100Wh (Watt-hour) can be carried on the plane during flights.
    InfinityLab 5.000 power bank is 18.65Wh (Watt-hour), and the 10.000 power bank is 38.5Wh (Watt-hour), which should be allowed as a carry-on item.

    We advise you to consult the flight company if you are in doubt before using it as a carry-on item.
     
  • Using InfinityLab power bank under cold environments
    The InfinityLab power bank will have lower charging efficiency under cold or freezing environments (below 5 degrees Celcius). Therefore, you will feel it’s charging slowly.

    However, when you return to normal temperature (below 35 degrees Celsius), the InfinityLab power bank’s charging efficiency will be back to normal.
  • Using my receiver, the picture on my TV is slightly out of sync with the audio. What's wrong?
    This receiver has a feature called "A/V Sync Delay" that allows you to manually set dissimilar video and audio synchronization that may occur with certain types of Plasma and HDTV's. The instruction for this setting can be found in your owner's manual in the section "Delay Adjustments" or "Delay Settings".
  • Using other exchangeable plugs for your InfinityLAB charger
    No, you should only use the InfinityLAB US, UK and EU swappable plugs included in the packaging box.
  • Using other USB Cables with our InfinityLab devices
    Yes, you can charge your devices with common USB-A and USB-C cables.
  • Using Quantum DUO with our QuantumENGINE software
    Unfortunately, our JBL Quantum DUO speakers are not supported by our QuantumENGINE PC software.
    All configuration is done on the speakers itself, and there is no need or required software to change the RGB lights.
  • Using speakers with 4 ohm impedance
    The Citation Amp can work with 4 ohm speakers and is rated at 200-watts per channel. Do not connect speakers less than 4 ohm!
  • Using the Quantum headset while charging

    JBL is committed to providing the most optimal consumer experience through superior immersive audio. Our Quantum 800/600 headsets are designed to be connected via 2.4Ghz, BT ( 800 only ) or 3.5mm jack. USB-C port is only designed for charging the internal 14hr battery and does not provide an audio connection. This is an intentional design decision.
     

  • Using the Trigger out 12V connection
    You can use a 3.5 mini-jack cable to connect the Citation Amp (TRIGGER OUT 12V) with your subwoofer or other equipment to have them power on when the Citation Amp wakes from standby.
    When the Citation Amp is ON, there will be output 12V DC signal, and when the Citation Amp is OFF  mode, there is no output (0V DC).
  • Using the USB Connection
    The USB port is only for charging the JBL Quantum 350 Wireless.
    Connect the dongle to use the 2.4GHz wireless connection.
  • Using Voice assistant on your Mark Levinson No. 5909 Headphone
    To use your source device’s voice assistant (Smartphone, tablet, etc.), HOLD the No 5909 multi-function button (right ear-cup).
     
  • Voice Assistant Headphone Connection
    If you are having trouble pairing your headphones or if your device is asking for a PIN, please make sure to check all available BT connections in your device's settings. Verify that you are connecting to the headphone's product name that excludes 'LE'. The 'LE' connection is only intended for voice assistant feature compatible with your headphones. If the voice assistant feature has not yet been configured, this would explain why the 'LE' connection appears as an available connection, but cannot be used for Bluetooth audio.

    https://harman.widen.net/s/dtsldx6jxx/bluetooth-pairing-issue-with-voice-assistant-headphone-le-image1 
  • Voice Assist Information
    To activate the voice assistance, press and hold the center button on the RIGHT ear for 2 seconds until you hear your music stop. You will be able to speak to VA through your headphones and it should comply with your command.
     
  • Voice commands that I registered are not triggering Smartbase.
    • Voice commands only work when receiving a call. • Excessive background noise such as wind or music, could be impacting unit’s effectiveness. Close windows and or reduce the volume of your music and try again.
  • Voice control
    Even though the Google Assistant is not built-in, Harman Kardon Radiance 2400 is compatible with a voice-assistant speaker, like the Harman Kardon Citation Series.
  • Warranty: Personalized Products
    Yes, we stand 100% behind the quality and performance of our products. If you encounter a problem with a Personalized Product, please contact our Customer Support team so that we can verify the issue and warranty coverage.
  • Waterproof Information
    This product does not feature an IPX rating and is not waterproof. Over exposure to water or moisture can result in irreversible damage to this unit.
  • Waterproof Information (IPX7)

    This unit is IPX7 rated, which means that you can submerge the unit in water as deep as 3 feet (1 meter) for up to 30 minutes.

    IPX7-icon.png
  • What's in the box
    Your JBL Quantum 100 includes the headset, a detachable microphone, QSG l Warranty Card l Warning Card, and a microphone windshield.
  • What's in the box?
    Your JBL Quantum Stream includes the following:
    1 x JBL Quantum Stream microphone
    1 x USB power cable
    1 x Warranty / Warning (W / !)
    1 x Quick Start Guide / Safety Sheet (S / i)
  • What's in the box? 

    Your JBL Quantum 200 includes the headset, a PC audio splitter, QSG l Warranty Card l Warning Card, and a microphone windshield.

  • What activities does Vi help you train for?
    Vi currently includes support for indoor/outdoor Walking, Jogging, Running, Sprinting, HIIT Runs and Cycling. Our supported activities will continue expanding every few months.
  • What are the benefits of having the soundbar connected to WiFi?
    You are able to enjoy wireless streaming via Chromecast and Airplay from your devices. This will also give you the opportunity to do multi-room playback. At the same time, the product will be able to automatically update, when there is software improvements available.
  • What are the benefits of the SB 150's EQ settings?
    The three EQ setting (Movie, Music, News) adjusts the sound setting of the SB 150. This feature provides a superior audio experience customized to the content being played.
  • What are the carpet spikes used for?
    "You can attached these spikes to your Arena 170 & Arena 180 at the bottom of the speaker. Use them for stability if you are placing your Arena 180/170 speakers on a thick rug or plush carpeting. The carpet spikes can be manually screwed into each foot on the base of the speaker."
  • What are the components of the JBL CLUB series incredible sound?
    Besides Legendary JBL Pro Sound and hi-res audio support available in the whole series; however, the JBL CLUB ONE headphone is equipped with 40mm Graphene orange drivers. Compensating the loss between the original signal and what you hear, the driver provides a fuller, more organic sound experience. On all models, you can adjust the audio reproduction to your preferences with the equalizer in the My JBL Headphones app.
     
  • What are the details for HDCP 2.2?
    HDCP (High Definition Copy Protection) 2.2 will become mandatory for 4K/UHD content only. First source should be the 4K BD player announced at IFA for spring 2016 from Samsung. In case of HDCP 2.2, the whole chain needs to be compatible to work from source to AVR to TV. If one of the devices in the chain is not HDCP 2.2-compliant, the player will downscale the content to 1080p. No black screen. This is the theory, anyway. HDCP 2.2 is copy-protection, so it does not decode the signal, but is concerned with preserving the content from being copied and distributed on the internet. The problem of HDCP 2.2 is that it is hardware-based, and not software-based, so there is nothing we can do on our existing models, like any other AVR manufacturer or TV. Please note that self-produced 4K material is no problem, since self-produced material has no digital HDCP copy protection. Only streamed material and UHD-Blu-ray will not work, since the HDCP protection will stop the signal in the receiver.
  • What are the differences between BAR 2.1 and BAR 2.1 Deep-Bass
    In case you wonder what the differences are between JBL BAR 2.1 and JBL BAR 2.1 Deep Bass, the newest model, then keep reading to find out more!
    Our JBL BAR 2.1 Deep Bass is an improvement to the BAR 2.1.

    Here is what you will get extra:
    1. Improved sound quality.
    2. Deeper and richer bass.
    3. A new modern design change.
    It may not be compelling enough for you to buy it or upgrade your device. However, if you are upgrading, then adding the JBL BAR 2.1 Deep Bass won't disappoint you at all!
  • What are the differences between Partyboost and Connect+
    Our newest products, such has JBL Pulse 4 and JBL Flip 5, feature a new technology called Partyboost .

    Partyboost technology
    • Improved Bluetooth connection between speakers.
    • A more powerful Bluetooth transmitter means that the speakers can be farther apart.
    • Partyboost can only connect to other Partyboost speakers.
    All newer Portable products from JBL will have Partyboost integrated.
    Unfortunately, this feature is not backwards compatible with  previous models that have JBL Connect or Connect+.
     
< 1 ... 50 51 52 53 54 ... 62 >

Can’t find what you’re looking for?

Call Us

Call Us

Talk to a product expert
Call Us now at: (877) 871-6755

Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)

Chat with Us

Chat with Us

Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)

message

Text Us

Text with a support agent via SMS at:
628-333-7807

Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)