How To

How To

1869 results
  • Please avoid the use of USB splitters and extenders built into screens etc. Dropouts in sound and lack of signal from the microphone in headsets may be the result. If possible, always connect directly to the computer, or use a single extension cord.
  • It is possible to connect a wireless Citation Sub or Sub S to the Citation Amp.
  • To use Chromecast on a SmartThings compatible speaker, proceed with the following steps:

    1. Go to the speaker's page in the SmartThings app.
    2. Go to "Third Party Services".
    3. Tap "Chromecast built-in".
    4. Tap "enable".
    5. Open a Chromecast enabled app on your smartphone or tablet.
    6. Play music.
    7. Press the Chromecast icon.
    8. Select the Chromecast compatible speaker.
  • The TV input is a single audio input with different options for connectors. If an HDMI cable is connected, then it will always be prioritized. Optical and coaxial digital will be prioritized by first signal present (Be aware, that some optical outputs will register as signal always)
    It is not possible to change between the digital inputs for TV source via the remote control. 
  • The InfinityLAB charger is not designed for wet environment.
    It is not waterproof, if it gets wet, there's a chance for short-circuit, which can cause damage to other electronics that you plug into them.
    Ensure that you keep your charger always dry.
  • Normally, batteries under 100Wh (Watt-hour) can be carried on the plane during flights.
    InfinityLab 5.000 power bank is 18.65Wh (Watt-hour), and the 10.000 power bank is 38.5Wh (Watt-hour), which should be allowed as a carry-on item.

    We advise you to consult the flight company if you are in doubt before using it as a carry-on item.
     
  • The InfinityLab power bank will have lower charging efficiency under cold or freezing environments (below 5 degrees Celcius). Therefore, you will feel it’s charging slowly.

    However, when you return to normal temperature (below 35 degrees Celsius), the InfinityLab power bank’s charging efficiency will be back to normal.
  • This receiver has a feature called "A/V Sync Delay" that allows you to manually set dissimilar video and audio synchronization that may occur with certain types of Plasma and HDTV's. The instruction for this setting can be found in your owner's manual in the section "Delay Adjustments" or "Delay Settings".
  • No, you should only use the InfinityLAB US, UK and EU swappable plugs included in the packaging box.
  • Yes, you can charge your devices with common USB-A and USB-C cables.
  • Unfortunately, our JBL Quantum DUO speakers are not supported by our QuantumENGINE PC software.
    All configuration is done on the speakers itself, and there is no need or required software to change the RGB lights.
  • The Citation Amp can work with 4 ohm speakers and is rated at 200-watts per channel. Do not connect speakers less than 4 ohm!
< 1 ... 128 129 130 131 132 ... 157 >

Can’t find what you’re looking for?

Call Us

Call Us

Talk to a product expert
Call Us now at: (877) 871-6755

Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)

Chat with Us

Chat with Us

Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)

message

Text Us

Text with a support agent via SMS at:
628-333-7807

Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)