How To

Support Overview / How To

How To

1846 results
  • What is HDCP 2.2?
    HDCP stands for High-bandwidth Digital Content Protection. In short term, this is used to protect 4K material from illegal pirating. Every device in your chain system, must support HDCP 2.2, meaning if your 4K Blue-Ray player has HDCP 2.2, then your Soundbar must support it (SB450 does) and TV as well, or else you won't see any 4K material. In case your TV do not support HDCP 2.2, then it will downscale to 1080P content, this is done by the Blue-Ray player.
  • What is MapMyFitness?
    MapMyFitness is the World’s Largest Digital Fitness Community.
  • What is MapMyRun?
    MapMyRun is a fitness tracking application that enables you to use the built-in GPS of your mobile device to track all of your fitness activities. Record your workout details, including duration, distance, pace, speed, elevation, calories burned, and route traveled on an interactive map.
  • What is power protect mode?
    This will illuminate if the voltage drops, increase on power or open circuit, in any wires touching the chassis
  • What is Purevoice?
    PureVoice is a new patent-pending technology from Harman, that actively analyzes media content to make the dialogue in Movies and TV programs easier to hear.
     
  • What is recommended continuous and peak power for the JBL Synthesis S2SEX passive subwoofer?
    1200 watts continuous and 3200 watts peak; this is the power rating of a bridged JBL Synthesis SDA4600 amplifier.
  • What is social mode?
    If social mode is switched on, it is possible to connect up to three source devices. Either device can take over playing. It is the last source-device which presses play, which plays music.
  • What is the "Software" connection on the back of the product?
    This connection is intended for software and service updates only.
  • What is the battery life expectancy for Clip2?
    Up to 8 hours of play time, depending on how loud you play and the source material.
  • What is the best way to insert the ear tips?
    We recommend inserting the ear tips (L for left, R for right located at the end of the ear tip extension) in the ear first and then proceed to wrap the ear loop around your ear. Please make sure to try all three sizes to insure the most comfortable fit.
  • What is the Bluetooth Range?
    The Bluetooth range varies. However, you should get up to 15 meters (just under 50 ft) when using the product indoors. If you are using the headphones outside, conditions vary based on surroundings and body mass. For the best connectivity results, please make sure that the device you are paired to is in the front of your body.
  • What is the clip in the headphones box used for?
    A clip has been included to help ensure the best fit and security of the headphones. Placing the clip on the audio cord and attaching to the top back of your shirt you should be able to twist your head right and left without the clip pulling your ear.
  • What is the default function of the "Smart" button, before any changes have been done in the app?
    The Smart button activates Ambient aware settings: Off, Low, High.
  • What is the diameter of the speaker unit inside the AKG N60NC and N60NC Wireless?
    These two models have 40 mm speaker units.
  • What is the difference between AURA and AURA Studio?
    AURA Studio is a Bluetooth speaker plus microphone built-in, where AURA has Wi-Fi built-in for AirPlay, DLNA and Spotify Connect solutions.
  • What is the difference between Dolby Atmos and MultiBeam?
    Dolby Atmos is an object-based surround sound format. Harman Kardon MultiBeam is a beam-forming surround sound system that creates a wide surround sound effect.
  • What is the difference between EVEREST 100, 300 and 700 models?
    100 is in-ear, 300 is on-ear, 700 is over-ear.
  • What is the difference between HDMI 2.0 and HDMI 2.0a?
    You'll have all the benefits from HDMI 2.0, but with 2.0a you will also have HDR (High Dynamic Range). Don't confuse HDR with cameras, this is used for TV's that support HDR content. In short, if a Blu-Ray supports HDR, it can enhanced dark scenes from a movie with this option.
  • What is the difference between JBL Go 3/Clip 4 and JBL Go 3 ECO/Clip 4 ECO?

    The difference is that the new ECO versions of Go 3 and Clip 4 are made from 90% PCR (Post-Consumer Recycled) plastic and wrapped in 100% recycled fabric on the speaker grille, while still delivering the same rich JBL Original Pro Sound and significantly reducing the carbon footprint of the product.

  • What is the difference between JBL QuantumSURROUND and DTS?
    The JBL QuantumSURROUND algorithm is specifically designed from the ground up to work with JBL Quantum gaming headsets—the software perfectly complements the hardware for incredibly realistic immersion. JBL QuantumSURROUND provides a strong sense of externalization, meaning that sound feels like it’s coming from loudspeakers in a professional listening room—or from the game world around you. With other spatialized audio solutions, it still feels like the sound is coming from the headphones, or just outside of them.
  • What is the difference between Quantum SPHERE 360 and Quantum SPATIAL 360?
    You can get the professional sound precision and accuracy with head-tracking enhanced JBL QuantumSPHERE 360™ on your PC while gaining sound immersion with JBL QuantumSPATIAL 360™ on your platform. JBL QuantumSPHERE 360™ is accessed through the USB-C dongle/adaptor on your PC passing through the QuantumENGINE. The JBL QuantumSPATIAL 360™ is accessed on consoles through the USB-C dongle/adaptor works without the JBL QuantumENGINE.
  • What is the difference between Soundgear and Soundgear BTA?
    The difference is the BTA unit, which is a Bluetooth transmitter. The Soundgear BTA comes with the BTA unit in the box. The Soundgear does not. The BTA can be connected (with a signal cable) to a TV set, a CD player, or any other stereo line-level source, and can then stream this signal to the Soundgear wirelessly, via Bluetooth. TV sound or game sound are possible, since the BTA and the Soundgear use aptX Low Latency, which reduces the audio delay to levels, where picture and sound will be closely synchronized. This is also the secret behind the option to connect two Soundgears to one BTA unit, for two people to share a TV transmission, or a video game. Actually, you can use the BTA to stream to most other Bluetooth headphones and loudspeakers, but only if these devices also support aptX LL will the delay be low enough for video use.
  • What is the difference between the 10.000 and the 20.000 mAH battery size stated on the box?
    The physical battery in Boombox has a capacity of 10.000mAh @7.4V. This is the charged battery storage. When outputting ( so power from the battery is drawn ), it's using 3.7V, half the storage voltage, which will give you 74Wh - equivalent to a 20.000mAh battery with power stored at 3.7V.
  • What is the difference between the 5000 and the 10000 mAH battery size stated on the box?
    The physical battery has a capacity of 5000mAh @7.4V. This is the charged battery storage. When outputting ( so power from the battery is drawn ), it's using 3.7V, so half of the voltage, which will give you 37Wh - equivalent to a 10.000mAh battery with power stored at 3.7V
  • What is the difference between the BDS 335 and BDS 635?
    The BDS 335 system is a 2.1 sound system, and speaker set included in this version is HKTS 335 speaker system. The BDS 635 system is a 5.1 sound system, and speaker set included in this version is HKTS 635 speaker system. That is the only difference between these two systems.
  • What is the difference between the cable with silver and the cable with black plugs?
    Since there is no fixed standard for headphone connections, there are two cables in the box, with different polarity. If one cable does not give good audio results, try the other cable. This usually solves the problem. The majority of phone models (Apple, Samsung from Galaxy S2 model, LG, HTC, Sony, Motorola, Blackberry) require the audio cable with the silver plugs. Pin assignment in this cable from the tip of the plug: R/L/Ground/Microphone. However, some manufacturers, such as some models from Nokia, require a cable with different pin assignment, (R/L/Microphone/Ground). In this case, you should use the audio cable with the black plugs.
  • What is the difference between the Endurance Sprint and Endurance Jump?
    The Endurance Jump features the power hook which provides a secure fit ear hook design, which automatically turns the power on/off when putting on or taking off the earphones. The Sprint does not feature the power hook and you manually have to turn on/off the headphones by pressing and holding the JBL logo on the RIGHT ear hook.
  • What is the difference between the first and second generation of Under Armour headphones?
    Wireless: Old name is Headphone Wireless. New name is Sport Wireless. Body is re-designed, the new body is smaller in diameter, but a bit longer. Angle of sound tube is changed slightly. Audio performance is improved. Enhancers slightly changed. Heartrate: Old name is Headphone Wireless Heartrate. New name is Sport Wireless Heartrate. Construction and design are unchanged.
  • What is the difference between the Focus 500 and the Focus 700?
    The only difference between the 500 and 700 series is that the 700 model provides you with a charging case. The features and functionality on the actual headphones themselves are the same.
  • What is the difference between the Inspire 500 and the Inspire 700?
    The only difference between the 500 and 700 series is that the 700 model provides you with a charging case. The features and functionality on the actual headphones themselves are the same.
< 1 ... 53 54 55 56 57 ... 62 >

Can’t find what you’re looking for?

Call Us

Call Us

Talk to a product expert
Call Us now at: (877) 871-6755

Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)

Chat with Us

Chat with Us

Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)

message

Text Us

Text with a support agent via SMS at:
628-333-7807

Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)