How To

How To

1846 results
  • No, you can only take phone calls when your Go + Play BT/Wireless is connected to a single smartphone. The speaker is designed in this way to protect privacy when it doesn't know which phone is being called. However, some Android phones (e.g. Google Nexus 5) will still transfer the phone call to speaker even when Go + Play BT/Wireless is connected with multiple smartphones. This is caused by the configuration of the phone.
  • Yes, the E25BT features a three button microphone which enables you to pause/play, skip tracks and answer and hang up phone calls.
  • Yes, the JBL Duet Mini features a three button microphone which enables you to pause/play, skip tracks and answer and hang up phone calls.
  • Yes, the E45BT headphones allow you to switch seamlessly from your music on your portable device to your phone. The controls are located on the Right ear cup which features your volume control and pause and play which is located in the center of the controls. The center button will allow you to answer and hang up phone calls .
  • Yes. A usb wall adapter would be required.
  • Yes. This product has a usb port for charging other devices.
  • No, it cannot play SACD disc.
  • No, it will only play stereo CD disc.
  • Yes. Go into our HK Alexa Setup app, tap on the 3 line icon and click on "Lightning" to toggle it on and off.
  • PureVoice is default ON when you turn on the soundbar. You may turn OFF PureVoice by using the LCD touch display. On the touchscreen, swipe to the Settings page, then tap Audio -> PureVoice to enable or disable PureVoice.
     
  • You can turn the Heart Rate sensor off and still use the headphones for audio by placing your finger on the right earpiece for 3-4 seconds. You will hear an audio prompt stating, “Heart Rate disconnected” which will turn the Heart Rate sensor off. If you wish to turn the sensor back on, simply place your finger on the RIGHT earpiece again for 3-4 seconds until you hear the voice prompt stating that the Heart Rate sensor has been turned back on.
  • Yes, When an update is available, you will find this on the product website of the Harman Kardon Aura Studio 2, in Manuals and Downloads. You will need to connect your Harman Kardon Aura Studio 2 by USB, and run the software update from a compatible computer.
  • No, upgrade can only be performed with a USB stick. There is no danger to the receiver if you try to upgrade through the wireless network, though.
  • Yes, from within the JBL Connect App, when you have 2 JBL Boombox speakers connected, set them in Stereo Mode. When you add a 3rd ( or more ) JBL Boombox speakers, they will automatically revert back to Party mode
  • Yes, just be aware that you are responsible for correct installation when using 3rd party wall mounts. The included wall-mounting kit in the box fits perfectly and is good for outdoor or indoor use.
  • Yes, the remote control permits you to pick up and stop a call, and activate the voice assistant to place a call.
  • No, the Allure speaker requires an internet connection in order to use Alexa voice commands. You can always listen to music via the Bluetooth connection if you are out of range with your Wi-Fi network
  • No, in-ceiling speakers cannot be used in the wall due to speaker dimensions. A wall is not deep enough to accommodate the depth of an in-ceiling speaker. For in-wall speakers, you can install them in the ceilings without any depth issues. However, for quality listening, we recommend using architectural speakers according to their intended purpose.
  • No, stereo pairs must be two of the same type of speaker. For example, two Omni 10 or two Omni 10+ speakers will work, but not one Omni 10 and one Omni 10+.
  • The Adapt can be powered from any USB port providing 1 amp current, but Harman recommends using the supplied power adapter.
  • Yes, when out of range of your Wi-Fi network, you can use the Bluetooth or analog auxiliary connection. The OMNI 50+ has a built-in battery as well to take the speaker out of the house.
  • Yes, simply connect an AUX (phono) cable from TV to your AURA.
  • Yes, that’s the best part about this speaker, there are so many options. Besides streaming over Wi-Fi, the JBL Playlist also offers a Bluetooth connection and an AUX input
  • Yes, that’s the best part about this speaker, there are so many options. Besides streaming over Wi-Fi, the JBL Control Xstream also offers a Bluetooth connection and an AUX input
  • Yes, both voice assistants are supported by the JBL LIVE headphones.
    Amazon Alexa or Google Assistant must be selected as the default voice assistant through the My JBL Headphones app.
    The two voice assistants cannot be used simultaneously. You can always change your default voice assistant through the My JBL Headphones app.
  • The EVEREST models 100, 300 and 700 are all updated with the HID (Human Interface Device) tool, available in the download section for each model. This tool works with Windows computers only. The EVEREST ELITE models are updated with a USB tool available on the special Everest web page. This tool is available in both an Apple MAC OS version and a Windows version. This USB tool update is used for the first production run of ELITE models ONLY, and only once! All later production runs, and all updates after this first USB update, will take place wirelessly through the My JBL Headphone app, made for iOS and Android.
  • No, When connected from multiple mobile devices ( up to 3 ) to one Harman Dual Sound enabled speaker, only the last one that connected will stay connected when enabling Harman Dual Sound. You can however connect from one mobile device to one of the 2 Harman Dual Sound enabled speakers, and activate Dual Sound afterwards. This will give you the option to interrupt the playback, in the same way as Social Mode works when connected to only one speaker.
  • No, this is a limitation from Google that requires every speaker to have a special license. First generation OMNI speakers do not have such license.
  • Yes. This product has a microphone.
  • No, each headset must have its own transmitter. However, even if you try to use more than one complete set of 915 in the same room simultaneously, it may not work either. Although the 915 has an automatic scan function that finds available slots in the 2.4 gHz transmission frequency band, interference may still occur.
< 1 ... 6 7 8 9 10 ... 62 >

Can’t find what you’re looking for?

Call Us

Call Us

Talk to a product expert
Call Us now at: (877) 871-6755

Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)

Chat with Us

Chat with Us

Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)

message

Text Us

Text with a support agent via SMS at:
628-333-7807

Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)