Yes, the headphones have Multipoint Connection, which allows you to switch seamlessly between the connected devices. 

What you need first

Make sure that these below things are checked before moving further:

1. You have the most recent version of the Google Home app installed 
2. Your LINK device is powered on (LINK 10 and LINK 20 with battery)
3. Your LINK device is plugged into a wall outlet (LINK 300, LINK 500 and LINK VIEW)
4. The LINK device is located near your router and you are standing next to it. 
5. The white LED lights in front of the LINK device are blinking, meaning it is ready to be set up
6. If you are using an Apple iOS device, then you need to turn on Bluetooth to install the device

   1. On your iOS device Home screen, tap Settings > Bluetooth.

   2. Make sure Bluetooth is On (toggled to the right and green).
   3. Return back to the Google Home app .
   4. Your LINK device should appear as "Set up this device" and you can continue with installing the LINK product.
7. If you are using an Android device, then you need to turn on Location services
   1. On your Android device, tap Settings .
   2. Tap Location > Turn on location.
   3. Tap Settings > Apps > Google Home app > Permissions.
   4. Next to "Location",  check the slider is On (toggled to the right and green)
   5. Your LINK device should appear as "Set up this device" and you can continue with installing the LINK product.

If you are still have trouble with installing your LINK devices then follow the steps below for further troubleshooting.

Troubleshooting

Step 1. Reboot your LINK device

1. Disconnect the power cable from your LINK device (300, 500 and VIEW) and for LINK 10 and LINK 20 simply turn the device "OFF". 
2. Reconnect power cable or turning the device ON for your LINK device. 

Step 2. Force close and relaunch the Google Home app      

1. From your Apple IOS device, do the following below:                   
   1. Press the Home button two times quickly. There will be a small preview of your recently used apps.      
   2. Select the app you want to close and swipe up towards the top of the screen.         
2. From your Android device, do the following below:              
   1. Launch the Recent Applications menu to see small previews of your recently used apps.                                 
   2. The Recent Apps button should be accessible at nearly any time along the bottom of the screen along with the other buttons on the virtual task bar.

Step 3. Check to see if the device is listed under “Ignored Devices” folder on the Devices tab      

1. Open the Google Home app.
2. In the top right corner of app home screen, tap Devices.
3. Scroll all the way down and make sure the LINK device is not listed under the Ignored Devices section.
4. NOTE: If you do not see any ignored devices, there is a chance that this section is not listed in the Google Home app.

Last thing to try​

If you are still experiencing issues with your LINK device not connecting to your Wireless network, then try the following:

1. Try finding another mobile device to set up your JBL LINK device, sometimes it can help connecting your LINK device.

2. Relocate your LINK device, or try to disable other Wireless network devices that might cause interference for your LINK device.

3. Perform a factory reset of your device, by holding down the mute button for 15 seconds (the LINK will now reboot and when the welcome message is heard then you can set it up again).
4. Reboot your Wireless router.           
5. Lastly, try turning Wi-Fi off and then back on again for your mobile device. Reopen your Google Home app and try again.

This is not supported at this time, but the upcoming Omni+ speakers will support Google Chromecast built-in, which has support for many Internet radio services such as TuneIn Radio.

The functions that can be programmed from your TV remote control into Boost TV are Volume+ and Volume-, Mute and Power. No other functions can be learned.

Yes, the two model 300 versions are of identical size, and so are the two model 700 versions. The carrying cases can be purchased as spare parts.

No. The case can only be used to carry the speaker.

The Everest 300 ear pads can be replaced by owner, but it is not easy, and removing the old pads may damage them. So, it is not a bad idea to have new pads at hand before removing the old ones. Since they are glued in place with double-adhesive tape, it is necessary to rip them off with care. After removing the old ones, clean off any residue of the double-adhesive tape that held them in place from the headphone pods. Then remove the protective layer on the new pads, exposing the adhesive. Carefully align the new pad before pressing the edge. This is to prevent the glue from sticking before you get the pad into the right position. When the pad sits correctly, you can press the edge all the way round to make the adhesive stick securely.

Yes, both ELITE 300 and 700 can do this.

The headphones can pair to multiple devices but can only be connected to one device at a time.

The JBL Endurance SPRINT, JUMP and DIVE can be used in salt water (i.e. sea) but we recommend to thoroughly wash the headphones in fresh water after every use in salt water, to remove the salt residue. Please note that only DIVE can actually be used in water, because it features a function lock and a built-in memory for MP3 music files. SPRINT and JUMP cannot be used in water, because the touch buttons will malfunction when submerged, and Bluetooth cannot function at all under water.

Because bluetooth cannot travel through water, the only Endurance model that is used for swimming is the Endurance DIVE model. The Endurance DIVE model features an MP3 player which allows you to listen to music under water without using bluetooth. Furthermore, only DIVE features a function lock, which prevents water from activating functions inadvertently. SPRINT and JUMP do not have this lock function, and will not work under water.

No, as soon as charging begins, the headphone shuts down. Since no option for cabled listening exists for this model, it is necessary to charge before listening is again possible.

No, this is a Bluetooth only headphone. Charging is done with cable, of course, but there is no cabled audio connection.

The carabiner can be removed from Clip 2 and can be purchased as a spare-part.

Since this headphone has Lightning connector, it cannot be used with any Apple product that does not have this connector. Also, it is necessary to use the My JBL Headphone app to play through the headphone, and to be able to control it. This means that only sources that permit the use of apps can be used. This will exclude use of iPod Nano. And of course iPod Shuffle cannot be used, since it has no Lightning connector. IPod Touch works fine, as does iPhones and iPads with Lightning connectors.

The Everest product uses standard Bluetooth protocol for audio communication. Gaming headphones usually use a different frequency and protocol for audio communication.

Yes, the click-on connector that holds the earphone in place on the Oculus Rift is adjustable in small clicks, longer or shorter.

JBL Playlist: Yes, it can be used with Bluetooth out of the box, and also Chromecast (setup is done via Google Home, but speaker does not have Google Assistant built-in) JBL Link Bar: Yes, it can be used with Bluetooth and Chromecast after setting the bar up with a Google account - choosing not to activate the Google Assistant. JBL Link Music: No, this speaker requires setup via Google Home JBL Link Portable: No, this speaker requires setup via Google Home JBL Link 10, 20 and Link View: No, these speakers requires setup via Google Home Harman Kardon Citation series: No, this speaker requires setup via Google Home Harman Kardon Allure: Yes, Bluetooth is available from factory settings. Every time it is powered on and off, the speaker will say "Now in setup mode, follow the instructions in the Harman Kardon Alexa App." Harman Kardon Allure Portable: Yes, Bluetooth will be available after initial setup in the Harman Kardon Alexa App. This means that you have to log in with your Amazon account at first, and if you do not want to use the Alexa assistant, log out of you Amazon account afterwards. Harman Kardon Astra: Yes, Bluetooth will be available after initial setup in the Harman Kardon Alexa App. This means that you have to log in with your Amazon account at first, and if you do not want to use the Alexa assistant, log out of you Amazon account afterwards.

No. This is a fixed feature and cannot be changed.

We are sorry, but this is not possible, neither as software upgrade nor as mechanical modification.

The UA Sport Wireless Flex can be paired to multiple devices but cannot connect to more than once device at a time.

Yes, in the app.

Wireless dual sound can be used to pair two speakers which has the wireless dual sound technology, Which are Aura Studio 2, GO+PLAY, Onyx studio 3, Onyx mini. Please note: Dual Wireless Sound only has the capability to connect no more than 2 speakers at a time. NOTE: The Onyx Studio 5, which also has Dual Wireless Sound, can NOT be used together with other products which feature DWS. Only 2 Onyx Studio 5's can pair with eachother.

unfortunately not, wireless dual sound, can only play the full signal, which contains both left and right channels in both speakers.

You have to manually press the home button on your phone to activate SIRI. Once SIRI is activated, you can speak through the headphones to ask SIRI questions.

Locate the power button on the back of the right ear cup. Gently slide the spring loaded power button up for 2-3 seconds and release. Once turned on, it will display a solid white light. If this is your first time powering on the device it should automatically go into pairing mode, and will display a fast blinking blue light. Make sure the device you are attempting to connect to is in search mode. The headphones should pop up on your list of discoverable devices within 3-5 seconds, and connect. Once connected, you will see a solid blue light above the power button.

No. Unfortunately, you cannot connect to multiple devices on the 750NC Wireless headphones. You can pair to multiple devices, but can only be connected to one device at a time. The Everest 710 and 310 feature ShareMe 2.0, which permits listening to the same source over two headphones, wirelessly.

Yes. A built-in microphone combined with a patented echo cancellation system secures clear and easy phone conversation. If a phone call is received while listening to music just push play button to answer the call. No need to find or touch the phone. This hands-free functionality can even be used for phone conferences

Yes, the Live 100 features the one button microphone that allows you to receive and end calls. Simply press the middle button on the inline mic for 1-2 seconds to answer the call. If you wish to hang up, press and hold the center button again for 1-2 seconds.

Yes. To take a call from the Live 200BT press the center button located on the RIGHT neckband for 1-2 seconds. To hang up, simply press the center button again.