How To

Yes, Soundgear supports aptX LL (Low Latency). (aptX is a way of packing more information into a compressed version of a signal).

Yes, the T110BT features a three button inline microphone which allows you to pause/play skip tracks, answer calls and control the volume.

Yes, the T205 features a one button universal microphone that gives you the ability to pause/play, answer/hang up calls, and skip tracks.

No. Because it features a one button universal microphone, it does not give you the ability to control the volume.

Yes. The 600BTNC features an audio cable that you can use if you do not wish to use the headphones via wirelessly.

Yes. You have the ability to control the volume which is located on the RIGHT arm of the neckband.

Yes. The UA Train features a detachable audio cable with a one button remote. (Please note: you cannot use bluetooth or TalkThru when using the cable connection.)

If the Wi-Fi indicator has all 3 LED lights on, then the signal to the speaker is extremely good, and if only 2 LED light up, then the signal will be good. If you only have 1 LED light or No LED light we suggest moving the speaker to a different location for a better Wi-Fi signal and better audio experience.

If you are playing on battery only, you may experience slightly lower bass level and dynamics near maximum volume. If you are AC connected and playing via your Xtreme speaker, you will hear an increase in bass performance. The reason that bass performance is lowered when playing on battery is to reduce power consumption for you to have longer playing time from your Xtreme speaker.

Yes, this headphone features a one button microphone that gives you the ability to pause/play, skip tracks, and answer/hang up phone calls.

No, the Reflect Mini BT does not feature the automatic shut off.

Yes, this headphone features a three button microphone that features volume control, track control, and can receive phone calls.

The Inspire 100 series does not feature a microphone.

The JBL Quantum 100 is not equipped with JBL QuantumSURROUND. You can consider to purchase the JBL Quantum 300, which comes with a USB dongle and access to JBL QuantumENGINE. 

The JBL Quantum 200 is not equipped with JBL QuantumSURROUND. You can consider to purchase the Quantum 300, which comes with a USB dongle and access to JBL QuantumENGINE. 

This speaker does not have an Aux Input, so no analog connection is possible.

This speaker supports both Samsung Bixby and Amazon Alexa voice assistant. You have the ability to setup both voice assistants and run both of them concurrently.

No. This product has a rechargeable battery.

Yes, ANC needs to be ON.

Unfortunately, there is no volume control on the inline microphone. You have the options to answer phone calls, skip tracks and pause and play.

No, the ALLURE PORTABLE has a Micro USB charging port on it, so you can charge it without the docking station using any USB charger with a charge rating of 2.3 amps or higher. A charger with a slightly lower rating, below 2.3 amps, will also work, but the charging time will increase.

For headphones with Version 4.0 of the Firmware, the first update will be done via USB cable, and after the first update, all subsequent updates will be delivered over the air. For headsets with version 5.0 of the firmware, all updates will be delivered over the air, via the app

The head tracker in the Quantum ONE uses your movements to calibrate the sensors. You can speed up the calibration process by doing the following: * Imagine that the headphone is a standard cube with 6 faces (Front, Back, Left, Right, Top, Bottom) * Orient the headphone so that it is sitting on each face of "the cube" sequentially. For example, start with the headphone positioned normally (bottom face of the cube down). Then rotate it so that the right side of the cube is facing down. Then continue through the rest of the faces of the cube. * Hold the headphone in each position for 1 second * Once all the faces of the device have been rotated, set the headphone down on a stationary surface for 2 or 3 seconds.

Each headphone is shipped with a micro USB charging cable. USB is the only way to charge the headphones, and all normal USB chargers may be used.

Yes, it is needed to close the USB cap completely for waterproof.

No, simply turn on your AVR device and make sure it is connected to your network and the mobile device is on the same network. Open your Spotify app and select the Spotify Connect logo, and your AVR device should be visible. Select the AVR device and play Spotify music through your system.

JBL LINK speakers require a Google account to operate. Your search history on the JBL LINK speaker will appear in your Google account's search history. Also, if you give the JBL LINK speaker permission, it may access your data saved in other Google services, like Calendar and Gmail to answer questions you ask.

JBL Club headphones do not support aptX. There are a number of different platforms available and our choice was driven by the one that provides the combination of best sound quality and user experience. The platform that we have selected perfectly fits the requirements of the JBL Club series including voice integration and audio customization whilst supplying the Hi Res-certified headphones with the quality of audio they deserve.

The integrated cable only serves as output to charge your devices.  Please use the input port to recharge your power bank.

Sorry, neither AAC nor aptX are supported.