To control the volume, simply move your finger up the ridges above the JBL logo on the RIGHT ear to increase the volume. To decrease the volume, move your finger down along the ridges.

In order to adjust your EQ settings you must follow these instructions:   In your Windows 10 taskbar, right click on the volume icon. It should bring up your selected output device. If “Speakers (JBL Quantum *model* Game)” is not selected, please proceed to the next step.
In the upper right hand corner, select the arrow. This will display a list of output devices on your PC. Please select “Speakers (JBL Quantum *model* Game)” After selecting 'speakers' you will now be able to adjust your EQ settings to your preference.

Power on the speaker Press and hold the Volume + button and the Bluetooth button together for 3-5 seconds until the speaker turns off Once turned off, the speaker has been reset to the factory default settings

To reset the device to its factory settings: 
Power on the speaker. While on, press and hold the power button down for 15-20 seconds until the speaker turns off.

Now that the speaker has been reset, make sure to remove it from your BT settings if it was once paired to other devices as the BT memory has been reset as well. Once you turn the speaker on again, it should automatically enter into pairing mode with a flashing LED. It should pop up on your discoverable devices under your BT settings and connect within a few seconds. 

To reset the JBL Charge 5, Charge Essential or Charge Essential 2: 

Volume+ & Play/Pause Long press for 2 seconds while the speaker is ON

Please note: If the Charge 5 was previously paired with any phones/tablets, please remove the speaker from your list of paired Bluetooth devices. Now it has been restored to its factory settings, it will automatically enter into pairing mode the first time you power it on.

To reset your speaker to its factory settings, press and hold the Bluetooth and Vol + buttons for at least 10 seconds. The LED will emit a constant amber color until the reset is completed. 

The InfinityLAB charger supports Power Delivery 3.0 to provide you with the fast-charging experience. 

If you are experiencing issues with your headphones' Bluetooth disconnecting and reconnecting while on standby, there is a new Firmware Update app to resolve this issue. Start by downloading the app  "JBL Firmware Update" (see links below).
Google Play Store: https://play.google.com/store/apps/details?id=com.jbl.tune.update
App Store: https://apps.apple.com/gb/app/jbl-firmware-update/id1548227663

Once downloaded, you can update your headphones firmware from there. 
Below you can see step by step images of the update process.

      

Try all Flex Fit Ear fins included (S/M/L) to find a snug fit for stability during workout. Usually the biggest size that fits comfortably in your ear will provide the most stability. Try all ear tip sizes (S/M/L) to find a snug seal for optimum sound quality, and look for a balance of comfort and acoustic sealing.

FLIP 6

Software Update Release Notes

------------------------------------------------------------------------

Version:  0.6.9.3

Release Date: July 5, 2024

Release Media: OTA (over the air) Update through JBL Portable App

 

What’s New

1. Fixed issue where a popping noise can be heard when pressing the power button to turn off the speaker

------------------------------------------------------------------------

Version:  0.6.8.9

Release Date: October 31, 2023

Release Media: OTA (over the air) Update through JBL Portable App

 

What’s New

1. Improved PartyBoost capability

 

AUTO SCAN:

Long Press Enter/ Exit to Auto Scan

Auto Scan will automatically search for all available stations and save to Presets

TUNE DOWN / TUNE UP:

Press 1x to tune down/up by step, manually

Press 2x to tune to the previous/next preset station

To power on the device, place one of the headphones inside your ear and press and hold the center button on the inline mic. You should hear the audible voice stating, “powering on” and a blue blinking light should appear at the top of the inline mic. If this is your first time connecting to a device, it should immediately go into pairing mode. The device should recognize the Focus 500/700 Wireless headphone. Once you select that option, the audible voice should state, “connected”. If you are trying to connect to a different device, turn the headphones on and press and hold for 3-5 seconds for the headphones to start searching for a different device. The headphones should appear on your discoverable devices within a few seconds. You should hear the audible voice stating, “powering on….looking for device” You will see the Bluetooth light alternate between red and blue when it is in pairing mode. Once connected the Bluetooth will change to a flashing LED light and the audible voice will state, “connected”.

Approximately 8 hours streaming music or 20 hours of talk time.

Horizon's alarm sounds for 3 minutes, then it shuts off, or rather it goes into snooze, for 9 minutes. Then it sounds the alarm again for 3 minutes, followed by snooze for another 9 minutes. After this final snooze period, it starts playing, and keeps on playing until it is manually shut off. The light shuts off with the audio.

Random flashing is an indication that the wireless link between primary and associated speakers was lost and recovered. If this happens too often, it may be caused by interference in the 2.4 GHz ISM band, caused by overcrowding of the band. Sometimes it helps to change location of the speakers, or to shut down other 2.4 GHz devices.

The Bass, Treble and Echo buttons on the control panel on top of the Partybox only applies these EQs/effect to the Microphone inputs on the rear of the speaker - for Karaoke use. The EQs and Echo effect cannot be applied to other sources or inputs such as Bluetooth, Aux or USB.

If more bass is desired, there is a Bass Boost button on the top control panel (with 2 levels of Bass Boost: Off, Level 1 & Level 2, switched through pressing the button multiple times). This will be applied to the sources and inputs mentioned above (but not the microphone inputs).

For JBL Quantum 100/200/300 models, they do not offer Game-Chat audio dial function.
To get the Game-Chat dial feature, you need JBL Quantum 400, and up, then you can adjust game-chat balance by rotating the dial-up and down.

For models that support Game-Chat dial, when you rotate the dial, you will feel a notch that indicates 50% game and 50% chat. Or you can see the status on the top bar of the JBL QuantumENGINE.

GO 4

Software Update Release Notes

------------------------------------------------------------------------

Version:  0.5.3.0

Release Date: June 11, 2024

Release Media: OTA (over the air) Update through JBL Portable App

 

What’s New

1. Add support for Multi-speaker connection with PartyBox Club 120 & PartyBox Stage 320
2. Performance enhancement

As of December 1, 2022, Google Assistant on third party smart displays, soundbars, and speakers are no longer able to make a voice call to a landline or mobile number on the carrier network. Voice-over-IP calls continue to work. This is due to the ongoing infrastructure improvements.

 

Please click here to see Google’s official statement/article explaining this.

The Citation Amp works with Chromecast built-in (audio only), and also works with Hey Google products. For example, you can use voice commands to tell your other Google speakers to play music on Citation Amp.

Harman Kardon Warranty Information

The limited warranty begins on the original date of purchase, and is valid only on products purchased from authorized resellers in the United States and used in the United States.

 

Warranty Period: Home Audio, Portables, Headphones

One year (except non-powered speakers, which are covered for five years)

 

Warranty Period: Car Audio, Marine, Powersports

One year

 

NOTE: Warranty coverage can differ by model, please refer to the warranty card included with your product to check your coverage.

 

What is covered by the Harman Kardon warranty?

Unless a different warranty period is stated in the Warranty Card provided with your Harman Kardon product, Harman Kardon warrants for a period of 1 year (5 years for any non-powered speakers) from the date of retail purchase by the original end-use purchaser, that this product, when delivered to you in new condition, in original packaging, from a Harman Kardon authorized reseller and used in normal conditions, is free from any defects in manufacturing, materials and workmanship. Refer to the Warranty Card provided with your Harman Kardon product for specific details including what is not covered along with other terms and conditions.

 

During the warranty period, the product or components will be repaired or replaced at Harman Kardon’s option, without charge for either parts or labor. Alternatively, Harman Kardon may decide at their sole discretion to refund the pro-rated portion of the original purchase price based on the remaining balance of the warranty period.

 

Any warranty service or replacement that is performed will not extend the original warranty period.

 

What is not covered by this warranty?

This limited warranty does not cover damage or failures that are a result of:

• Damage caused by accident, unreasonable use or neglect (including the lack of reasonable and necessary maintenance)
• Damage to, or deterioration of, any accessory or decorative surface
• Damage resulting from failure to follow instructions contained in the owner’s manual.
• Damage resulting from the performance of repairs by someone other than an authorized Harman Kardon service center
• Deterioration of component parts, the nature of which is to become worn or depleted with use such as batteries and headphone ear pads

 

How to obtain warranty service?

Before requesting a replacement, you may read through our support materials and FAQs. If your questions are not answered, please reach out to our experts for personal assistance and troubleshooting. If you still need to replace your product, please follow these steps:

 

1. Have your purchase receipt or order confirmation handy
2. Please visit our support section to fill out the warranty exchange form.

 

HDMI Output

Both Enchant 800 and Enchant 1300 support these:

• HDMI 2.0b compliance
• HDCP 2.2 compliance (Means it supports 4K Blue-Ray Movies or streaming clients with 4K encryption)
• CEC features (Scroll to see support)

HDMI Input

Enchant features only 1 x HDMI input, and Enchant has 3 x HDMI inputs and support this:

• HDMI 2.0b.
• HDCP 2.2 for all HDMI input connections (Means it supports 4K Blue-Ray Movies or streaming clients with 4K encryption)
• 4K Pass-through.

CEC Support

CEC support only available through your HDMI connection and we are always using standard protocol for our products.
We support these:

• System Standby: When you press the "Power off" button on your TV remote, the Enchant soundbar will go into Standby mode as well.
• ARC or called Audio Return Channel: If you would have a TV BOX connected directly to your TV and using ARC from TV to Enchant soundbar, then all sound will be transferred through ARC connection.
  • In case you are not using the HDMI ARC connection then sound coming from the TV show will not be transferred to the Enchant soundbar.
• System Audio Control: Using your TV remote to turn up or lower the volume will be synchronized with the Enchant soundbar.

Bigger model is the Enchant 1300 and smaller model is the Enchant 800.

These headphones consist of plastics, synthetic leathers and foams. All JBL Jr products were put through extensive tests and are compliant with Standard Consumer Safety Specification for Toy Safety.

If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using.

Make sure your headset is configured correctly in your Windows settings. The setting should normally be JBL Quantum *Game* to experience QuantumSURROUND. 
Please check out this video to assist you further!
 
https://www.youtube.com/watch?v=LA80RmBrbYg

To stop hearing your own voice through your headphones, please start the JBL QuantumENGINE software, navigate to the "Microphone" tab, and change the sidetone setting to 0.

To turn off the Horizon 2, Press the 'DAB/FM' button until no radio is playing.
This works in the order (from standby/off): DAB / FM / Off.

In Bluetooth mode, if the phone or tablet is disconnected, or nothing is played for 10 minutes, the Horizon 2 will go into standby mode automatically (not changeable).

These two products are identical. The only difference between them is...

 

HORIZON 2: out-of-the-box is set to HOTEL OFF

 

HORIZON 2 HOTEL: out-of-the-box is set to HOTEL ON

 

On either unit, to toggle HOTEL mode ON or OFF, press and hold Alarm 1 and Preset 1. The LCD indicator will show the HOTEL status, ON or OFF.

 

The unit will retain this setting, even when unplugged. The only way to change the mode is to press and hold the two buttons again. Or course, a Factory Reset will also restore to the original out-of-the-box setting.

 

When HOTEL mode is ON, these are the following changes that occur.

 

• Alarm can only be set for a single day.
• Alarm will ONLY work as a buzzer.
• A Room Number can be set.
• A Max Alarm Volume can be set.
• Bluetooth cannot auto-reconnect.

By pressing Volume - & JBL Connect button for 3 seconds. A voice will tell you the current software version.

By pressing Volume - & JBL Connect button for 3 seconds. A voice will tell you the current software version of your Xtreme. The Xtreme must be ON. The latest version of the JBL Xtreme firmware is v. 7.7