Support Overview / Revel / Speakers / Architectural / C563

C563

6 ½" In-Ceiling Loudspeaker

Getting started with your C563

Documents & Downloads

Manuals

Owner's Manual (EN) 3.55 MB

Other

Product Brochures (EN) 580.42 KB

Product Specifications

General Specifications

Height: Cutout dimensions (dia.)

Width: Square grille finished Width

Depth: 4.9" (12.5 cm)

Weight: 2 lb (0.9 kg) / Shipping weight

Features: Includes both round and square zero-bezel magnetic grilles • Round grille finished dimension (dia.)

High Frequency Driver Components: 1" aluminum dome swiveling tweeter with waveguide

Low Frequency Extension: High frequency Extension

Low Frequency Driver Components: 6 ½" Micro-Ceramic Composite (MCC) Cone, Cast-Aluminum Frame Woofer

Mounting: C-2 fastening mechanism • Compatible with wall material thickness range

Recommended Amplifier Power: 10 - 130 Watts RMS

C563

Revel in-ceiling loudspeakers draw upon the same research, resources, and unique perspectives that put all our loudspeakers in a class by themselves. Each model offers a standard-setting low sonic coloration and freedom from distortion over a wide dynamic range.

FAQs & How-Tos

4 results

Sort

Page size

Can I use an in-ceiling speaker as an in-wall unit or vice versa?

No, in-ceiling speakers cannot be used in the wall due to speaker dimensions. A wall is not deep enough to accommodate the depth of an in-ceiling speaker. For in-wall speakers, you can install them in the ceilings without any depth issues. However, for quality listening, we recommend using architectural speakers according to their intended purpose.

Was this helpful? Thank you for your feedback!
What is the purpose of the audio level adjustment on in-wall/in-ceiling speakers?

The audio level adjustment is a dedicated control for adjusting the tweeter’s high frequency volume. It allows you attenuate up to 3dB, based on your environment and/or preference.

Was this helpful? Thank you for your feedback!
What works better for stereo listening, in-wall or in-ceiling speaker?

In-wall speakers will work better for stereo listening because the speaker will be facing directly at you instead of above you. Note: Stereo imaging requires the listening position (“sweet spot”) to be dead center, equal distance, from the front left and right speakers.

Was this helpful? Thank you for your feedback!
Which is superior, in-wall/in-ceiling speaker(s) with or without a back-box?

All of our in-wall/in-ceiling speakers are designed to be used in a wall without the need for a back-box. The specs provided are based on no back-box. However, when adding a back-box (really only possible when doing new construction), you will improve the low frequency response a bit, getting a tighter bass response.

Was this helpful? Thank you for your feedback!