JBL Cinema Base
Home cinema 2.2 all in one soundbase for television
Sold from 2014 until 2018
Getting started with your JBL Cinema Base
Documents & Downloads
Product Specifications
- Type
- Dual 6" (150mm) polypropylene woofers
- Sensitivity
- 93 dB (2.83V/1m)
- System Frequency Response
- 45Hz – 20kHz
- Speaker Depth (mm)
- 600 mm
- Speaker Width (mm)
- 102 mm
- Speaker Weight (lb)
- 17.6 lb
- Speaker Height (in)
- 15.8"
- Speaker Height (mm)
- 401.6 mm
- Speaker Weight (kg)
- 8 kg
- Speaker Depth (in)
- 23.6"
- Speaker Width (in)
- 4"
Home theater sound now fits under your TV
Designed to complement your flat-screen TV. The JBL Cinema Base projects stunning virtual surround sound from a sleek, self-contained package. Its all in one table-top form is designed to fit neatly under most TVs up to 60”. It connects with a single cable to your TV using an HDMI™, optical or analog connection, and plays music wirelessly from Bluetooth® smartphones or tablets. 240 watts of power drive the built-in speakers, including the integrated, independently adjustable dual subwoofer. It features Harman Volume, which keeps sudden volume changes from disrupting the experience. It can learn any TV remote volume control, giving you simplified control over your cinema experience. In addition, a side USB port can charge your phone or tablet. The unique metallic speaker grille is both elegant and easy to clean.
FAQs & How-Tos
-
Harman Volume on the Cinema Base has no levels, it's either on or off. It will remember the last setting when it's powered on. When you enable Harman Volume, you will hear audio feedback ( 4 tones going up when you turn it on, and 4 tones going down when you turn it off ) There is no visual indication that shows if it's on or offWas this helpful? Thank you for your feedback!
-
Yes, this can be done very easily by doing the following procedure: 1: Power on the Cinema Base. 2: Simultaneously press the “Surround” and “VOL –” buttons (at the same time). 3: The Cinema Base source LED button will light amber in color, for 1 second, then the power button LED light will go off and on. 4: Your Cinema Base is now reset.Was this helpful? Thank you for your feedback!
-
The subwoofer output on the CinemaBase, it's a filtered signal. By that we mean, it is not a full frequency signal, but filtered to match the low frequencies for a subwoofer.Was this helpful? Thank you for your feedback!
-
Yes, that is possible. 1: Turn on your Cinema Base. 2: Press surround and volume - button simultaneously for 5 seconds. 3: When the source button on the Cinema Base lights amber for 1 second and goes off after. 4: Your Cinema Base is now reset.Was this helpful? Thank you for your feedback!
-
Voltage is 100 - 240 Volt AC. Maximum power consumption is 120 Watts.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Call Us
Talk to a product expert
Call Us now at:
(877) 871-6755
Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)
Chat with Us
Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)