InstantGo 5000 Wireless
18 W:n virtapankki PD-pikateholataukseen langattomalla latauksella
Getting started with your InstantGo 5000 Wireless
Documents & Downloads
Specifications
- Akkutyyppi
- Lithium-ion Polymer 18.65 Wh (3.73V, 5,000 mAh)
- USB-C-tulo-/lähtövirta
- 5V⎓3A;9V⎓2A;12V⎓1.5A
- Langaton latausteho (Qi)
- 5W⎓7.5W⎓10W
- Lähtöteho (maks., W)
- 18
- Käyttölämpötila
- 0~45°C
- USB-A-lähtöteho (enintään)
- 5V⎓3A
- Akun latausaika (tuntia)
- 2.5 hours (5V⎓3A)
- RF-taajuusalue
- 124.359 kHz – 155.929 kHz
- RF-kenttävoimakkuus
- -16.49 dBμV⎓m @10m
- Mitat (L × K × S)
- 136.2 x 69 x 15.7 mm/ 5.4 x 2.7 x 0.62 "
- Paino
- 170 g/ 0.37 lbs
- USB-C-yhteensopiva
- Kyllä
- Ympäristöystävällinen pakkaus
- Kyllä
- Tehonsyöttö 3.0
- Kyllä
- Läpilataus
- Kyllä
- Langaton QI-lataus
- Kyllä
- Älykäs virranjakelu
- Kyllä
- Sisältää latauskaapelin
- Kyllä
- * Yksi langaton, kaksi johdollista. Lisäkaapelit myydään erikseen.
- -
- ** Latausajat perustuvat SGS-testeihin, joissa on käytetty USB-C-porttia ja yhteensopivaa latauskaapelia. Todellinen käyttökokemus saattaa vaihdella useiden tekijöiden, kuten mallin, akun koon, lämpötilan, kosteuden sekä laitteen kunnon ja iän perusteella.
- -
- *** Lisäkaapelit myydään erikseen.
- -
- **** USB-C-portti tukee enintään 18 W:n PD-teholatausta. USB-A-portti tukee enintään 15 W:n latausta. Ladattaessa kolmea laitetta samanaikaisesti kokonaislähtöteho on enintään 18 W.
- -
- ***** Perustuu iPhone 12 -puhelimen SGS-testeihin käyttäen täyteen ladattua virtapankkia lataamaan täysin tyhjää iPhone 12 -puhelinta täyteen sisätiloissa huoneenlämmössä ja toistaen prosessia siihen asti, kun virtapankin akku on tyhjä. Todellinen käyttökokemus saattaa vaihdella useista tekijöistä, kuten älypuhelimen merkistä, mallista, akun koosta, lämpötilasta, kosteudesta sekä laitteen kunnosta ja iästä riippuen.
- -
- ****** Seinälaturi myydään erikseen.
- -
Virtaa elämään. Missä tahansa, milloin tahansa.
Uudelleenlatausta katkeamattomin yhteyksin missä ja milloin tahansa. Tällä kompaktilla ja supernopealla langattomalla InfinityLab InstantGo 5000 Wireless -virtapankilla voit ladata turvallisesti jopa kolme laitetta* samanaikaisesti. Jos tarvitset pikaisesti lisävirtaa, laturi voi ladata laitteesi jopa 50 %:iin kahvitaukosi aikana. Langattoman Qi-latausalustan avulla saat helposti lisävirtaa ilman kaapeleita. Onko saatavilla vain yksi seinäpistorasia? Älykkäällä läpilatauksella voit antaa lisävirtaa sekä puhelimeen että virtapankkiin samanaikaisesti. Automaattisen suojauksen ansiosta sinun ei tarvitse enää koskaan kantaa huolta laitteistasi. Lisäksi laturi on valmistettu kierrätetystä muovista sekä pakattu kestävää kehitystä tukeviin, ympäristöystävällisiin materiaaleihin.
FAQs & How-Tos
-
Here are all the possibilities of how you can charge devices from your power bank.
- InstantGo 5,000 with built-in Lightning cable: 1 (1 x integrated cable)
- InstantGo 5,000 with built-in USB-C cable: 2 (1 x integrated cable, and 1 x USB-C output)
- InstantGo 5,000 wireless: 3 (1 x Wireless, 1 x USB-C output and 1 x USB-A output)
- InstantGo 10,000 with built-in Lightning cable: 2 (1 x integrated cable, and 1 x USB-A output)
- InstantGo 10,000 with built-in USB-C cable: 3 (1 x integrated cable, 1 x USB-C output and 1 x USB-A output)
- InstantGo 10,000 wireless: 3 (1 x Wireless, 1 x USB-C output and 1 x USB-A output)
Was this helpful? Thank you for your feedback! -
Under normal usage, the battery should remain at 80% capacity after 300 charge cycles.
What is a charge cycle?
Your power bank is 100% charged, and then one cycle means when you discharge the device to 0% and charge it all the way up to 100%. That is one full charge cycle.Was this helpful? Thank you for your feedback! -
InstantGo 10,000 with a built-in USB-C cable and InstantGo 10,000 Wireless should be able to charge your laptop.
However, it may not apply to laptops that require output power of more than 30W.
Please check your laptop requirement before charging it with our devices.
Was this helpful? Thank you for your feedback! -
Our InfinityLab power bank should work with most cases in the market, and it depends on the design of the protected case/cover.
However, if your case’s bottom surface is thicker than 3mm, it may impact your wireless charging experience, and we recommend taking off the protected case/cover for the best charging experience.
If your phone case/cover has a metal plate on the back, it will not charge your device since it is a security feature of the FOD (Foreign object detection). This means our Infinity Lab Qi-certified power bank can detect if a foreign object, such as metal, is on its surface. If that happens, the wireless charger either stops charging or does not start charging at all.
Was this helpful? Thank you for your feedback! -
We suggest picking one way to charge your phone, so either charge your phone through wireless charging or wired charging. You cannot charge one device using both options at the same time.
Was this helpful? Thank you for your feedback! -
Ensure that your InfinityLab power bank is charged, then press the power button to trigger charging.
If nothing happens, please try to charge your power bank with a different charger and check the charging indicator next to the power button to see if the LEDs lights are blinking.
If it still doesn’t work, please contact our customer service team for help.Was this helpful? Thank you for your feedback! -
To enjoy the wireless charging feature for your InfinityLab power bank, below are the instructions on how to activate it.
- Press the power button (located on the front side, next to the battery indicator).
- Place your device on top of the power bank.
- The LED indicator on the side of the power bank will light up, indicating that the product is "charging."
Was this helpful? Thank you for your feedback! -
Smart pass-through charging helps you boost your device and power bank simultaneously through one wall outlet.
Here is how it works:- Plug your power bank into a wall charger.
- Connect your device to the power bank (using the integrated cable or connecting a cable to it).
- Press the power button on the power bank to trigger charging if your phone/device doesn't indicate it is charging.
Was this helpful? Thank you for your feedback! -
All InfinityLab power banks are < 100Wh, so there are no restrictions for taking them onto flights as hand luggage (also known as cabin baggage or carry-on luggage).
However, power banks are not allowed to be carried in your hold luggage (also known as checked luggage).Was this helpful? Thank you for your feedback! -
The InfinityLab power bank will not damage your device.
The InfinityLab power bank will deliver the power your device needs during charging, andd the InfinityLab power bank features auto protection against overheating and features overcurrent/overvoltage conditions.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Chat with us
Monday - Friday: 10:00 - 19:00
Saturday - Sunday: 11:00 - 17:00