SDA-8300

Caractéristiques du produit

Caractéristiques Générales

Cooling: Continuously variable speed forced air, front to back airflow

Maximum Fan Noise (dBA SPL @ 1M): 47

Required AC Mains (±10%): 100Vrms - 240Vrms ~50/60Hz

Caractéristiques Audio

Rated Output Power Into 8 Ohms: 300W

Rated Output Power Into 4 Ohms: 300W

Rated Output Power Into 2 Ohms: 150W

Bridged Output Power Into 8 Ohms: 600W

High Impedance: 70-Volt & 100-Volt Capable

Frequency Response (8Ω, 20Hz - 20kHz): ±0.25dB

Analog Input Signal to Noise Ratio: 104 dB

BLU link Input Signal to Noise Ratio (A-Weighted): >108dB

Total Harmonic Distortion (at full rated power, 20Hz - 20kHz): 0.35%

Damping Factor (20Hz to100Hz): >1000

Input Impedance (nominal balanced, unbalanced): 10kΩ, 5kΩ

Maximum Input Level before Compression (Low Gain Mode): (+)20dB

Load Impedance Stereo/Dual Mode: 2Ω - 16Ω; 70Vrms and 100Vrms

Load Impedance Bridge Mono: 4Ω - 16Ω; 140Vrms and 200Vrms

Dimensions

Width: 19 in. (48.3 cm)

Height: 3.5 in. (8.9 cm)

Depth: 14.25 in. ( 35.63 cm)

Weight: 23.5lbs (10.66kg)

Caractéristiques de Connexion et Commandes

Eight balanced line inputs: 6-pin block connectors (Two channels per block connector)

Eight speaker level outputs: Terminal strip (accepts up to 10AWG wire)

BLU link Input/Output: RJ-45 (Category 5e)

Ethernet: RJ-45 (Category 5e)

Programmable General Purpose Input/Output Ports: " 3-pin block connector (Enables SLEEP mode and monitoring of AMP STATUS)"

Power Connector: 15A IEC

Speaker Specifications

Frequency Response: +/-0.25db

Signal-to-Noise Ratio: >108db

Total Harmonic Distortion (THD): <0.35%

Power Requirements (+/-10%): 100VAC – 240VAC 50/60hz

SDA 8300

The SDA-8300 is a versatile 8-channel Class D power amplifier designed to deliver maximum power while taking up minimal rack space. Each channel is rated to deliver 300W into 8 ohms and adjacent channel pairs can be bridged to deliver 600W into 8 ohms. This flexible channel configuration makes this an ideal amplifier to power LCR, surround, and height channel loudspeakers as well as in-wall subwoofers in JBL Synthesis immersive audio systems. Powerful built-in DSP allows for custom loudspeaker tuning and full external control allows for complete and easy system integration.