How To

Support Overview / How To

How To

1676 results

Sort

Page size

What types of DC triggers are available from the No. 523 and No. 526 preamps?

Normal: Trigger output is a standard 12VDC signal. Pulsed: Trigger output in a 12V pulse 50-100ms wide. Theatre: Turns the trigger on (standard 12VDC) only if the current input is in SSP mode, otherwise the trigger is off.

Was this helpful? Thank you for your feedback!
What Wi-Fi standards are supported for Citation?

Citation speakers support 802.11g, 802.11n, and 802.11ac standards on both 2.4 GHz and 5 GHz bands. We recommend using 5 GHz if available, as this will give you more stable performance and use the full power of your wireless audio. Contact our customer support to get in touch with an expert that can help you with your Wi-Fi network. We are here to help!

Was this helpful? Thank you for your feedback!
What will happen when the time limit has been reached?

10 minutes before the time limit has been reached, a voice prompt will be played on the headphones. When reaching the time limit, the volume will be muted, and a new voice prompt will inform that the listening limit has been reached.

Was this helpful? Thank you for your feedback!
What you need to get started with your device
Getting started with the checklist
- A JBL LINK device(s).
- Latest version of the Google Home app installed on your mobile device.
- Latest version of the Google app (Android only) installed on your mobile device.
- A Google Account (you can create one online via Google).
- A mobile device with either iOS or Android support.
  - Must have iOS 10 or higher
  - Must have Android 5.0 and higher
  - There is no support for PC set up.
- An internet connection from your local ISP (Internet Service Provider).
- Your Wireless Network must secured with WPA2 Encryption (Enterprise mode NOT supported).
- Availability and performance of certain features, services and applications are device- and network-dependent and may not be available in all areas; subscription(s) may be required, and additional terms, conditions and/or charges may apply.
Wi-Fi requirement
- Wi-Fi routers must have Encryption enabled to install JBL LINK speakers (WPA2 etc).
- Wi-Fi Extenders need to feature support of Multicast forwarding and UPnP.
- Always use 5 GHz Wi-Fi for best performance and less interference.
- For routers that have 2.4G Wi-Fi support only, make sure that they are using channels 1, 6 or 11 only.
You can now install your JBL LINK speaker to your Wireless Network and you can find our setup article that shows how to install your LINK product.
Was this helpful? Thank you for your feedback!
What’s the benefit of Bluetooth 5.3 LE Audio and Codec Technology of the JBL Tour One M2?

LE Audio is the next generation of Bluetooth Audio, making audio streaming over Bluetooth Low Energy possible. It enables new use cases and significantly reduces power consumption compared to Classic (BR/EDR) Audio. LE Audio allows for independently synchronized audio streams to each earbud as well as seamlessly broadcasting audio streams to multiple listeners, with low power consumption.

Was this helpful? Thank you for your feedback!
What’s the difference between JBL QuantumSURROUND and JBL QuantumSPHERE 360?

JBL QuantumSPHERE 360 is JBL QuantumSURROUND that’s kicked up a notch by using a head-tracking sensor to fix sounds in 360 degrees of space around you. With typical headphones, when you move your head, the soundscape follows your movement. But with JBL QuantumSPHERE 360, if you rotate your head, the sound source’s perceived location stays in place because the head-tracking sensor compensates for your head movement. For example, if there’s a sound coming from in front of you, and you turn your head to the left, the sound source’s perceived location moves to your right ear—the sound stays locked in space as you move your head.

Also, the human brain uses small head movements to distinguish if sound sources are behind or in front of us. The brain processes the differences between when a sound arrives at the left vs. the right ear to determine where the sound is located. So with JBL QuantumSPHERE 360, you can move your head naturally to pinpoint the exact source of sounds around you.

Was this helpful? Thank you for your feedback!
When are the No. 532 and No. 526 DC triggers activated?

The Normal and Pulsed DC triggers are active (on) when the No. 523 and No. 526 is on, they are not active (off) when the No. 523 and No. 526 is off. The Theatre DC trigger is present only if the current input is in SSP mode, otherwise this trigger is off.

Was this helpful? Thank you for your feedback!
When attempting to update to latest version using a USB flash drive, I am getting the message “Not Available”, am I doing something wrong?.

First try using a different flash drive, we recommend the following: ScanDisk PNY Kingston Verbatim If the problem persists try using an updated version of Winzip when downloading the zip file to the USB flash drive.

Was this helpful? Thank you for your feedback!
When changing the volume on my JBL LINK 10, 20, 300 or 500, the front LED indicator slowly lights up. Is this normal?

Yes, when changing volume to higher or lower, the LED will illuminate to show that you are changing the volume.

Was this helpful? Thank you for your feedback!
When Go + Play BT/Wireless is connected to multiple smart devices via Bluetooth, why is there a 'pop' when I switch between music sources?

When the speaker is switching quickly between music sources via Bluetooth, it's normal to experience a very short 'pop' sound because the Bluetooth signal is breaking in and doing the handshake with the speaker. It won't appear after the Bluetooth signal is stable.

Was this helpful? Thank you for your feedback!
When I adjust LFE Trim in the Audio Effects menu, I hear no difference of level from my subwoofer. Why is that?

Please note that the LFE Trim function is only active with surround source signals that feature a separate LFE track for the subwoofer. It does not affect subwoofer level when playing stereo or mono.

Was this helpful? Thank you for your feedback!
When I am trying to program my Cinema SB100, 200 or 400 to learn the volume up, down and the mute codes from my TV remote controller, I can only get mute, or perhaps mute and a volume code, to work correctly. What is wrong?

This problem is usually caused by pressing down too hard on the soundbar's VOL + or VOL - Buttons. Only press just enough for one click to be felt. If a second click is felt in the button, you are pressing too hard, and you are actually activating the MUTE function for learning, not VOL up or down. You may have to repeatedly let go of the VOL button on the soundbar, followed by pressing it again and then pressing the VOL button on the TV remote before the surround light on the soundbar lights up white and goes back to amber flashing, as a sign that this function has been learned. This is no problem, though. Just keep trying until the three commands have been learned. The soundbar only exits learning mode when you press and hold the surround button as the final step.

Was this helpful? Thank you for your feedback!