Adapt+

Adapt+

Wireless HD Receiver

Getting started with your Adapt+

Getting started with your Adapt+

Quick Start Guide

Get up and running in no time with our easy-to-follow Quick Start Guide

Product Registration

Register your product

Do you own this product? Register it here! And claim your warranty or service easily

Register now

Documents & Downloads

Product Specifications

Frequency response
20Hz~20kHz -3dB
Signal-to-noise ratio
>85dB
Weight
285g
Dimensions (W x D x H)
143mm x 100mm x 35mm
Input connections
Bluetooth®, Aux-in, Wi-Fi, Optical
Bluetooth® transmitter modulation
GFSK, π/4 DQPSK, 8DPSK
5G Wi-Fi modulation
OFDM, BPSK, QPSK, 16QAM, 64QAM, 256QAM
2.4G Wi-Fi modulation
OFDM, DSSS, DBPSK, DQPSK, CCK, 16QAM, 64QAM
2.4G Wi-Fi transmitter frequency range
2412 – 2472MHz (2.4GHz ISM Band, USA 11 Channels, Europe and others 13 Channels)
5G Wi-Fi transmitter frequency range
5.15~5.35GHz, 5.470~5.725GHz, 5.725~5.825GHz
Bluetooth® transmitter frequency range
2402 – 2480MHz
Output voltage
>1Vrms
Bluetooth® transmitter power
<4dBm
5G Wi-Fi transmitter power
<20dBm (EIRP)
2.4G Wi-Fi transmitter power
<20dBm (EIRP)
Power supply
5VDC, 2.3A
Power consumption in sleep mode
<3.0 Watts
China
-

Turns your stereo or home theater into a wireless music streaming system

The Harman Kardon Omni Adapt+ is a wireless, HD music receiver. It upgrades your existing stereo and home theater equipment to become a wireless HD music system. It also adds access to music services such as Spotify Connect and Chromecast built-in. Simple to set up and easy to operate, the Adapt+ is the fastest way to play your music wireless anywhere in your home with one speaker or many!

Seamlessly stream your favorite music all over your home and to any Harman Kardon Omni+ wireless HD products Listen to different music in any room of your home.
Stream your favorite songs and playlists wirelessly around your home with Spotify Connect, using the Spotify app as a remote. Spotify Connect feature requires Spotify Premium subscription.
With Chromecast built-in, you can cast your favorite music, radio stations and podcasts from your mobile device to your speakers. Chromecast built-in may require subscription(s).
The Harman Kardon Omni Adapt+ supports 24bit / 192kHz HD audio streaming Enjoy a superior audio experience, with higher audio quality than from a CD.
Connect your TV, iPod, DVD or anything via Bluetooth, Optical, or 3.5mm input to your Omni Adapt+ and it will automatically steam your music to any other Harman Kardon Omni+ speakers in your home wirelessly.
Walk from one room to another and your favorite music will follow at the touch of a button. Simply press the Link button to start the music – no need to find your phone, just press the button.
Supports the latest 802.11AC wireless home networking technology and dual band (both 2.4GHz and 5GHz) Wi-Fi connection, resulting in a faster, robust and more stable wireless connection
Easily set up your system and control it with the Harman Kardon Controller app. With additional support for WAC on Apple devices and a step by step in-app guide you can quickly start streaming your music.
Harman Kardon Omni Adapt+ can be used as part of a stereo or multi-channel speaker system. With built-in Dolby Digital decoding, you can even use it to setup a 5.1 home theater system.

FAQs & How-Tos

7 results
  • Streaming via Bluetooth or direct aux in connection are supported without the HK Controller app. For OMNI+ devices that you already have placed in a room, they are capable of using either Spotify Connect or Chromecast built-in without the need of using the HK Controller app. Use only the HK Controller app for setting up any OMNI+ devices you may have.
  • The ADAPT+ is made to connect an external subwoofer. The subwoofer needs to be an active device, which means that it must have its own, built-in amplifier.
  • There is a reset button on the bottom of the Omni+ devices. Press and hold this button for 5 seconds to perform a factory reset of your product. All product settings, Wi-Fi, and Bluetooth connections will be erased. To reset the OMNI 50+ speaker, please do the following: First, press & hold ‘Source’, ‘Vol+’, ‘Vol-‘ buttons at the same time. The Omni 50+ will switched off, indicating that the product was successful reset. Secondly, press ‘power' button to turn on power for the Omni 50+ speaker. Now you can easily set up the product again for your home Wi-Fi network.
  • On the bottom of your ADAPT+ there is a reset button. Hold it down for 5 seconds, until the round button LED lights up in white. The product is now reset and ready to be set up again.
  • No, that is not possible. However, you can create a 5.1 wireless surround system to extend your TV or movie sound. All you need is two additional OMNI+ speakers, such as 2 x OMNI 10+, OMNI 20+ or OMNI 50+.
  • To have the best possible performance for OMNI+ system we advise to have a dual-band router with a powerful chipset and ram for best Wi-Fi performance. This will not only help our products to perform better and more stable, but your other devices at home will have more power and fewer interruptions. Please also be sure that your home Wi-Fi router has Multicast enabled, as our Omni+ system requires this feature enabled in order to work (same goes for Chromecast devices). Always connect our Omni+ system to 5 GHz Wi-Fi whenever possible to limit the risk of devices being slow or interrupted on 2.4GHz Wi-Fi.
  • For OMNI BAR+, three sources are available: HDMI (not applicable for ADAPT+), Optical or AUX input. For Adapt+ two sources are available: Optical in/outputs and Analog in/outputs. If you select "Watching movies and TV shows" in the HK controller app for either one of them, you will have a very little delay and good lip sync with the TV for video applications. However, you will not be able to rebroadcast the TV signal to other OMNI+ speakers when selecting this mode. If you select "Listening to music", you will be able to rebroadcast TV signal to other OMNI+ speakers in your house, however, you will have lip sync delay with video material. Select that specific mode if you use HDMI (not applicable for ADAPT+), Optical or AUX for music only. Using Chromecast, Spotify Connect or Bluetooth is not part of these modes. When using one of these streaming methods, you are able to rebroadcast any music source.

Can’t find what you’re looking for?

Call us

Call us

To speak to our customer service specialist

1800-102-0525

Mon to Sun 10 AM to 7 PM IST

message

Message Us

Chat with a support agent via Whatsapp at:
91 70658 44446

Mon - Sun: 10:00 am - 7:00 pm (IST)