Adapt

Adapt

Wireless HD Audio Adaptor

Getting started with your Adapt

Getting started with your Adapt

Quick Start Guide

Get up and running in no time with our easy-to-follow Quick Start Guide

Product Registration

Register your product

Do you own this product? Register it here! And claim your warranty or service easily

Register now

Documents & Downloads

Product Specifications

Bluetooth
Output Voltage
>1Vrms
Bluetooth Transmitter Frequency Range
2402 – 2480MHz
Bluetooth Transmitter Power
less than 4dBm
Bluetooth Transmitter Modulation
GFSK, 3.14/4 DQPSK, 8DPSK
2.4G Wi-Fi Transmitter Frequency Range
2412 – 2472MHz
2.4G Wi-Fi Transmitter Power
less than 20dBm (EIRP)
2.4G Wi-Fi Modulation
OFDM, DSSS, DBPSK, DQPSK, CCK,
2.4G Wi-Fi Network Compatibility
IEEE 802.11b/g/n
Weight (g)
121
Power consumption in sleep mode
<3 Watts/Hour
Note - The HK Omni Adapt is intended to be used for streaming music via Bluetooth and Wi-Fi technology. This product is designed to be instantly on and ready to play music at a moment's notice. The HK Omni Adapt is in compliance with the European Union energy legislation. It will enter into sleep mode (networked standby) after 10 minutes without operation, after which it can be re-activated via Bluetooth or Wi-Fi.
Width (mm)
118
Width (in)
4-5/8
Depth (mm)
86
Depth (in)
3-3/8
Height (mm)
30
Height (in)
1-3/16
China
-

Wireless room-filling stereo sound at the touch of a button

The Harman Kardon Adapt is a wireless, truly HD audio stereo adaptor. It updates your existing Hi-Fi gear with pure, crisp sound thanks to Harman’s expertise in audio technology. Now the music doesn’t stop no matter where you are in your home. Simply set up multiple speakers or adaptors and enjoy wireless room filling sound at the touch of a button. Play different music in different rooms or stream the same song throughout your house with party mode. Our app and Bluetooth capability let you access any music from your phone or your favorite apps seamlessly.

Seamlessly stream your favorite music to all Harman Kardon wireless HD audio products in your house.
Stream your favorite classical music to one room while streaming rock to another. Multiple streams keep everyone happy.
Walk from one room to another and your favorite music will follow at the touch of a button.
Use the Harman Kardon app to stream your favorite music anywhere in your home. Control and configure your HD audio system wirelessly via the app with no cable connection required.
Start a party and jump right in! When multiple songs are playing wirelessly, one button press cycles through them all so you can pick your favorite. One long press of the button starts party mode with every speaker playing back the same music. Room to room control made easy without the need to use your phone or tablet.
Unlike other wireless streaming systems, the Harman Kardon Omni 10supports 24bit / 96kHz Studio Quality HD audio streaming. Enjoy a superior audio experience, higher resolution than from a CD.

FAQs & How-Tos

4 results
  • There is a reset button on the bottom of the Omni+ devices. Press and hold this button for 5 seconds to perform a factory reset of your product. All product settings, Wi-Fi, and Bluetooth connections will be erased. To reset the OMNI 50+ speaker, please do the following: First, press & hold ‘Source’, ‘Vol+’, ‘Vol-‘ buttons at the same time. The Omni 50+ will switched off, indicating that the product was successful reset. Secondly, press ‘power' button to turn on power for the Omni 50+ speaker. Now you can easily set up the product again for your home Wi-Fi network.
  • Make sure you disable AP/Client isolation on your Access Point / Extender and that Multicast forwarding is not disabled between the W-Fi networks. However, we cannot guarantee than streaming will work flawless as Extender networks are tricky and can cause many issues. Always use a 5GHz Wi-Fi network extender for best results.
  • Unfortunately, some Huawei phones are not able to stream music from the HK Controller app to 1st generation Omni speakers. However, the new Omni 10+, 20+, and 50+ have fixed this issue, and you will be able to stream music to them using your Huawei phone.
  • To set up the Harman Kardon Adapt in the HK Controller app, you have to select "One speaker", not the Adapt+ option. When selecting "One speaker", simply follow the on-screen instructions to install your Adapt on the Wi-Fi network. Note that the instructions for Adapt devices will appear on your screen after 30-45 seconds (Only Apple devices).

Can’t find what you’re looking for?

Call us

Call us

To speak to our customer service specialist

1800-102-0525

Mon to Sun 10 AM to 7 PM IST

message

Message Us

Chat with a support agent via Whatsapp at:
91 70658 44446

Mon - Sun: 10:00 am - 7:00 pm (IST)