How To

How To

1414 results
  • It is a personalization feature that allows you to customize your favorite music track, auto-off timing, and music volume.
    Once set up, you can directly access it through the remote control or within the JBL ONE App.
  • The calibration sound setup process ensures the soundbar delivers the best 3D surround effects for any interior and room layout.
  • The calibration sound setup process ensures the soundbar delivers the best 3D surround effects for any interior and room layout.

  • The sound feedback is the tone you hear when you send a command to the soundbar. This confirmation tone can be switched off, if you do not want it to be heard.
  • The Wi-Fi indicator shows the signal strength between your speaker and Wi-Fi router. 3 bars = perfect signal 2 bars = good signal 1 bar = low/poor signal (which might cause dropouts or other issues)
  • If the headphones and source device do not pair:
    1. Make sure the headphones are NOT connected to the charger. Cycle power switch OFF and ON.
    2. Turn Bluetooth® OFF, then ON again on the source device.
    3. Turn OFF Bluetooth® feature on any other device that is paired with the headphones.
    4. Press and Hold the ON/OFF button for >5 seconds until white status light pulses.
    5. Make sure “No 5909" is selected in the Bluetooth® source device list.
     
  • All products must be on Wi-Fi 5GHz network, and you need two additional OMNI+ speakers of the same model (2 x OMNI 20+ for example) to create 5.1 wireless surround sound.
  • The battery LED's show how much the battery is charged on your LINK 10 or LINK 20 speaker.
  • (+) Button A short press will increase the volume. A long press will skip to the next track. (-) Button A short press will decrease the volume. A long press will skip back a track. Middle (Multifunction Button) A short press will play/pause music or answer/end calls. A long press on the middle button will turn the device on/off.
  • Here is a list of what the LED lights mean. Light OFF: Power OFF, no charger connected, OR charger connected, fully charged. RED light ON: Power OFF, charger connected and charging. BLUE light flashing: Power ON, no Bluetooth connected. Constant BLUE light: Power ON, connected to Bluetooth device. RED/BLUE light flashing: Power ON, in pairing mode. RED light flashing: Power ON, low battery.
  • Power button, no light: Product is OFF. Power button, constant light: Product is ON. Power button: constant white, when no Bluetooth device connected. Power button, flashing blue in Bluetooth pairing mode. Power button, constant blue light: Bluetooth connected. Battery indicator LEDs: Five LEDs show battery level. When charging, the blinking LED shows how far charging has progressed. When fully charged, the LED lights will turn off. JBL Connect button flashes white in connection mode. When connected: constant light.
  • Power button, no light: Product is OFF. Power button, constant light: Product is ON. Power button: constant white, when no Bluetooth device connected. Power button, flashing blue in Bluetooth pairing mode. Power button, constant blue light: Bluetooth connected. Battery indicator LEDs: Five LEDs show battery level. When charging, the blinking LED shows how far charging has progressed. When fully charged, the LED lights will turn off. JBL Connect button flashes white in connection mode. When connected: constant light.
< 1 ... 100 101 102 103 104 ... 118 >

Can’t find what you’re looking for?

Call us

Call us

To speak to our customer service specialist

1800-102-0525

Mon to Sun 10 AM to 7 PM IST

message

Message Us

Chat with a support agent via Whatsapp at:
91 70658 44446

Mon - Sun: 10:00 am - 7:00 pm (IST)