How To

Support Overview / How To

How To

1413 results
  • What is the No. 585 power output into 4 ohms?
    The No. 585 will deliver 350 watts into 4 ohms
  • What is the overall power rating of the Citation MultiBeam 1100?
    The overall power rating is 630 W maximum power at 1% THD.
     
  • What is the procedure to reset Xtreme?
    With the speaker ON, press and hold the VOL+ and Pause/Play buttons for 5-6 seconds. The Xtreme shuts down, and is now reset. You will need to 'forget' the speaker in Bluetooth settings on your phone/tablet in order to pair it again.
  • What is the purpose of having dual tweeters on a speaker?
    Speakers will dual tweeters gives listeners the ability to have a single speaker to drive two independent channels, ideally stereo left and right. Dual tweeter speakers are usually used for in-ceiling audio applications. They have four terminals (two sets of positives and negatives) used to plug in speaker wires from the amplifier.
  • What is the range of JBL LIVE headphones? How far can I go from the source device, while listening to my JBL LIVE headphones?
    The range is approximately 10 meters, depending on the environment.
  • What is the rated power of the Omni 50+ speaker with and without AC power?
    The Omni 50+ rated power with AC power connected is 4 X 25 Watt. When using battery only, the rated power is 4 X 15 Watt.
  • What is the rated power of the OMNI BAR+ system?
    Both the OMNI BAR+ and its subwoofer have 200W of power amplification, which means that total system power is 400 W.
  • What is the requirement for the JBL Everest GA series?
    These are the supported languages for the Everest GA series.
    • English (US, UK, CA, IN, AU)
    • German
    • French (CA, FR)
    • Japanese
    • Portuguese (BR)
    More will be added in future Google releases.
  • What is the USB connection on the back of the product for?
    This connection is intended for software and service updates only.
  • What is the voltage and power consumption
    Voltage is 100 - 240 Volt AC. Maximum power consumption is 120 Watts.
  • What is the wearing style of the Soundgear Sense?

    Soundgear Sense provides two wearing styles, either as regular TWS headphones with an ear hook for a secure fit, or as a neckband headphone with the optional detachable neckband. Both wearing styles offer the same open ear experience with rich, full-range sound, it is just a matter of your own preference or use case which wearing style you choose. 

  • What is this new simultaneous voice assistant experience?

    Now, with Google Assistant and Alexa available simultaneously on your JBL Authentics speakers, you can choose to use one or both voice services available. This means you can set up just Alexa, just Google Assistant, or both. If you choose to set up both services, they will be at the ready. You can use either of them whenever you want simply by saying either “Hey Google” or “Alexa”.

  • What is Window Sonic Spatial Surround Sound?
    Windows Sonic is a virtual surround algorithm that is built into Windows 10 PCs. You can read more here:
    https://docs.microsoft.com/en-us/windows/win32/coreaudio/spatial-sound
  • What is Wireless Stereo Boost pairing mode?
    The Onyx Studio 8 features Wireless Stereo Boost which allows you to connect two Onyx Studio 8 speakers together for a more powerful listening experience. Please note: You cannot connect the Onyx Studio 8 to other Onyx Studio speakers such as the Onyx Studio 7, 6 and 5.
  • What is Wireless Stereo Boost pairing mode?

    Wireless Stereo Boost allows you to connect two of the same model speakers together for a more powerful listening experience. 


    To use this feature, hold the Bluetooth button on both speakers for more than 5 seconds.


    The left & right channels can be swapped by tapping the Bluetooth button on the host speaker twice.

  • What JBL QuantumENGINE features can I use with my JBL Quantum Stream microphone?

    The JBL Quantum Stream microphone is compatible with the JBL QuantumENGINE software. You can customize or use the following settings/features via the JBL QuantumENGINE:

    Microphone settings
    Polar patters (Cardioid / Onnidirectional)
    Equalizer
    RGB LED Light colors + animations/effects
    Update firmware + software
  • What kind of data does JBL LINK 10, 20, 300 or 500 collect?
    Only data to make Google Assistant more efficient and Google services faster. When interacting with the speaker you will receive more personalized feedback in the future.
  • What kinds of sensors do the Vi headphones have? Can they track my heart rate?
    The Vi headphones have a couple different sensors, including a touch sensor (for interacting with Vi), a gyroscope (for rotational motion), accelerometer (for movement or vibrations) and a barometer (for elevation / atmospheric pressure). Plus they house a “custom” sensor that uses visible-light and infrared LEDs along with photodiodes, all in the left ear bud, to determine your heart rate. The headphones can also talk to your iPhone/Android's GPS and Wi-Fi to help with figuring out location and other information.
  • What language does the Smart Case support?

    The Smart Case only supports English, so even if you change the language in the JBL Headphones app, it will remain in English.

  • What languages are supported by JBL QuantumENGINE?
    The JBL QuantumENGINE supports up to 20 languages. You can select the preferred language in the system section.
  • What material are the ear cushions made of?
    The ear cushions are made of protein leather.
  • What platforms are compatible with JBL Quantum Stream?

    The JBL Quantum Stream mic is compatible with the following platforms:

    PC (Windows)
    PlayStation 4
    PlayStation 5
    Nintendo Switch
    Mobile*
    Mac

    * Most newer phones are compatible.
  • What platforms can I use with my JBL Quantum ONE headset?
    The JBL Quantum ONE headset is compatible via 3.5mm jack with PC, PlayStation, Xbox, Nintendo Switch, Mobile, Mac and VR. You can use the USB connection with PC.
  • What router port numbers does the Harman Kardon Wireless HD Audio System use?
    The Harman Kardon Wireless HD Audio System uses UDP ports 6060 and 6080.
  • What router should i get, to have the best performance for my OMNI+ system?
    To have the best possible performance for OMNI+ system we advise to have a dual-band router with a powerful chipset and ram for best Wi-Fi performance. This will not only help our products to perform better and more stable, but your other devices at home will have more power and fewer interruptions. Please also be sure that your home Wi-Fi router has Multicast enabled, as our Omni+ system requires this feature enabled in order to work (same goes for Chromecast devices). Always connect our Omni+ system to 5 GHz Wi-Fi whenever possible to limit the risk of devices being slow or interrupted on 2.4GHz Wi-Fi.
  • What settings should I use to get the most out of JBL QuantumSURROUND?
    Different games have different settings, but as a general rule, make sure that your game outputs multi-channel unprocessed audio. We recommend 7.1 surround, but 5.1 works too. Always disable any other processing (like DTS and Dolby).  
  • What should I expect after turning on JBL QuantumSURROUND?
    The first thing you’ll notice is that sound no longer feels like it’s “inside your head.” Suddenly it seems like the game audio is coming from high-quality loudspeakers—or the virtual game world—all around you.

    It’s a different experience than you get with other headphones, and may take a little while to adjust to. For example, sounds coming from sources in the distance will seem farther away, as they would in real life. Even though you might be used to those sounds feeling closer with other headphones, JBL QuantumSURROUND provides hyper-accurate spatialization that can give you a competitive edge.

    So spend some time dialing in the EQ to your liking, and see how real-world hearing helps you pinpoint enemies and bring the game to life. 
     
  • What to do if Spatial Audio is not working?

    If you are not able to turn Spatial Audio on and the option is greyed out on the JBL Smart Tx, then you need to do the following.


    • Open the JBL Headphones app
    • Disable High-Resolution Audio (LDAC)
    • The headphones will turn off and reboot
    • You can enable Spatial Audio after the reboot
  • What to do if teammates can't hear you?

    If your teammates can not hear you, make sure of the following:

    USB is correctly plugged in
    Only one voice chat application is in use while in-game.
    The mic input is set to JBL Quantum Stream.
    Mic gain is not turned all the way down
    Mic is not muted (mute/unmute by pressing the touch panel on top of the mic). By default the RBG will indicate red for muted, and green for unmuted(active).

     

  • What to do if the TWS headphones only work in Mono mode?

    Make sure both headphones are fully charged to ensure that the issue is not due to one of the earbuds lacking power.

    Check that the contact points on the headphones and the charging case are clear of dirt, so the issue is not due to the product not being able to charge.

    The LED on the headphones will show a blue light when correctly inserted in the charging case.

    Try to reset the headphones if the product is fully charged but are still only working in Mono mode.

    A reset guide for the headphones can be found here: Reset guide

< 1 ... 42 43 44 45 46 ... 48 >

Can’t find what you’re looking for?

Call us

Call us

To speak to our customer service specialist

1800-102-0525

Mon to Sun 10 AM to 7 PM IST

message

Message Us

Chat with a support agent via Whatsapp at:
91 70658 44446

Mon - Sun: 10:00 am - 7:00 pm (IST)