How To
How To
1421 results
-
Yes, press Volume - and Connect button at the same time for 5 seconds. A voice reads out a set of numbers, which is the current software version. Using the HID Software Tool, available in the Manuals & Downloads section, you can find out if an update exists, and if so, install the update.Was this helpful? Thank you for your feedback!
-
Yes, in the HDMI Setup Menu, it is possible to select either �Sound To TV� or �Sound To Amp�, Amp being the AVR. This detail is not mentioned in the owner's manual.Was this helpful? Thank you for your feedback!
-
Yes, in the HDMI Setup Menu, you can select either Sound To TV or to Amp, (which is the AVR 70). This detail is not mentioned in the owner's manual.Was this helpful? Thank you for your feedback!
-
SB 250 will only pass one connection at a time. If two connections are playing at the same time, then the optical device will take priority.Was this helpful? Thank you for your feedback!
-
Yes, you can definitely connect two wired devices at the same time. However, the Boost TV will only pass one connection at a time. If two connections are playing at the same time, the optical device will take priority.Was this helpful? Thank you for your feedback!
-
No, for now it is only possible to connect two speakers together using the JBL connect feature. Newer JBL products feature JBL Connect+, which allows you to connect > 100 devices simultaneously, these however are not compatible with older JBL products featuring JBL ConnectWas this helpful? Thank you for your feedback!
-
You can connect up to 3 Bluetooth devices at the same time. In case you are listening to music via Bluetooth, each device will override the other when a command (play) is selected.Was this helpful? Thank you for your feedback!
-
No, you can only have one activate device connected to the speaker. Please un-pair your current Bluetooth device, then connect with another device if needed.Was this helpful? Thank you for your feedback!
-
No. The two Soundgears can connect to the BTA, but not to each other. Also, when using one Soundgear, the use of aptxLL may result in a delay. If you are connected to two, the delay may be more noticeable, since LL is no longer active.Was this helpful? Thank you for your feedback!
-
No, it's not possible to connect simultaneously from multiple devices to the Flip 3 SE. If you need a new device to pair with the Flip 3 SE, please press the Bluetooth button the Flip 3 SE to enable pairing mode. The Flip 3 SE should be available in the list of Bluetooth devices on your mobile phone/tabletWas this helpful? Thank you for your feedback!
-
No, that is not possible. You can only connect it to WiFi through the settings menu of the BDS. Find your WiFi network and type in password, then your BDS is connected to the network. Or you can use LAN connection.Was this helpful? Thank you for your feedback!
-
Yes, Control Xstream uses both 2.4 GHz and 5 GHZ wi-fi networks.Was this helpful? Thank you for your feedback!
