How To

Support Overview / How To

How To

1413 results

Sort

Page size

Factory Reset Procedure

To reset the JBL Charge 5, Charge Essential or Charge Essential 2:

Volume+ & Play/Pause Long press for 2 seconds while the speaker is ON

Please note: If the Charge 5 was previously paired with any phones/tablets, please remove the speaker from your list of paired Bluetooth devices. Now it has been restored to its factory settings, it will automatically enter into pairing mode the first time you power it on.

Was this helpful? Thank you for your feedback!
Factory Reset Instructions for the ClearCall Speaker

To perform a factory reset:
First, remove the ClearCall from the list of paired devices in the phone or tablet's Bluetooth settings.
Then, press and hold the Bluetooth & Volume - buttons for more than 4 seconds to reset the ClearCall to factory settings.

Was this helpful? Thank you for your feedback!
Factory Reset Instructions

To reset the device to its factory settings:
Power on the speaker. While on, press and hold the power button down for 15-20 seconds until the speaker turns off.

Now that the speaker has been reset, make sure to remove it from your BT settings if it was once paired to other devices as the BT memory has been reset as well. Once you turn the speaker on again, it should automatically enter into pairing mode with a flashing LED. It should pop up on your discoverable devices under your BT settings and connect within a few seconds.

Was this helpful? Thank you for your feedback!
EQ Settings and Surround Information

In order to adjust your EQ settings you must follow these instructions: In your Windows 10 taskbar, right click on the volume icon. It should bring up your selected output device. If “Speakers (JBL Quantum *model* Game)” is not selected, please proceed to the next step.
In the upper right hand corner, select the arrow. This will display a list of output devices on your PC. Please select “Speakers (JBL Quantum *model* Game)” After selecting 'speakers' you will now be able to adjust your EQ settings to your preference.

Was this helpful? Thank you for your feedback!
Endurance Series Headphones: Track Control

To pause/play press the "L" on the JBL logo located on the RIGHT ear for 1 second. If you want to skip the track forward, press the "L" on the JBL logo on the RIGHT ear hook for 2 seconds. To skip tracks backward, press the "L" on the JBL logo on the RIGHT ear hook for 3-4 seconds.

Was this helpful? Thank you for your feedback!
Endurance Series Headphones: Switching Devices

To pair to a different device, double tap and hold your finger on the JBL logo for 5 seconds until you see the LED light flash blue. Make sure that the device you are trying to connect to is in range and in pairing mode. You should see the Endurance headphone pop up on your discoverable devices within a few seconds and the flashing LED light should now be a solid blue.

Was this helpful? Thank you for your feedback!
Endurance Series Headphones: Pairing Information

If connecting for the first time, the headphone will enter pairing mode automatically after it is powered on. To turn the headphones on, simply spread apart the RIGHT power hook from the cord. You will see solid red LED and then it will flash blue as it begins to search for a device to connect to. The Endurance headphone should pop up on your discoverable devices within a few seconds and you should be connected! If you wish to turn off the headphones, remove them from your ear and allow the RIGHT power hook and cord to close together. This is magnetized, so they should close together with ease.

Was this helpful? Thank you for your feedback!
Endurance Series Headphones: Charging

Fully charge the earbuds along with the charging case before the first use. The charging case is for charging the earbuds only. LED behaviors: 1 LED- 25% 2 LED-25%-50% 3 LED-50%-75% 4 LED-75%-99% NO LED-100% Fully Charged You can keep the earbuds in standby mode for up to 3 hours without having to return them to the case. beyond this point the earbuds must be returned to the case for charging. You should receive up to 4 hours of playback with additional 24 hours of backup power from the charging case.

Was this helpful? Thank you for your feedback!
Endurance Series Headphones: Apt X

The Endurance headphones do not support Apt X or AAC audio codecs.

Was this helpful? Thank you for your feedback!
Endurance Dive Headphones: MP3 Information. How to add music, play function.

Here is how to add music to the Dive Headphones: 1. Place the MP3 music files that you want to transfer to the Dive headphones on your computer, where you can find them again. The sequence is not important, they will be played in alphanumerical sequence. If you want to have a special sequence to your tracks, you can add a number as the first file name. 2. Connect the Dive to your computer with the USB cable. Please use the cable that came with the headphones, since other USB cables may be wired for charging only, and may not work. 3. Your Dive will now pop up in your explorer folder overview as a new drive. Total capacity is about 991 MB. 4. Now you simply drag-and-drop the MP3 files from their location onto the Dive, or you mark the files, copy them and paste them onto the Dive. Do not use folders of any kind, and do not try to place other file types on the Dive's memory. MP3 files with a resolution of 320 kbits/second is maximum quality possible. Please note that the owner's manual contains an error about random play, stating that MP3 play will always be done in random sequence. Unfortunately, this is an error. All replay of MP3 files from the internal memory is alphanumerical, NOT random. As mentioned above, you can add a number to the track title, and the tracks will be played in numerical order, until no more numbers are present, after which replay is in alphabetical order.

Was this helpful? Thank you for your feedback!
ENCHANT SUB: Software Update Release Notes
ENCHANT SUB
Software Update Release Notes
------------------------------------------------------------------------
Version: 24.51.11.75.00
Release Date: January 20th, 2025
Release Media: OTA (over the air) Automatic Update through HK One App

What’s New
1. Improved software performance
Was this helpful? Thank you for your feedback!
ENCHANT 900: Software Update Release Notes
ENCHANT 900

Software Update Release Notes

------------------------------------------------------------------------

Version: 24.50.65.90.00

Release Date: January 20th, 2025

Release Media: OTA (over the air) Automatic Update through HK One App

What’s New
1. Increase EQ to 7 bands
2. Improved software performance
Was this helpful? Thank you for your feedback!