How To

How To

1413 results
  • Each headphone is shipped with a micro USB charging cable. USB is the only way to charge the headphones, and all normal USB chargers may be used.
  • The head tracker in the Quantum ONE uses your movements to calibrate the sensors. You can speed up the calibration process by doing the following: * Imagine that the headphone is a standard cube with 6 faces (Front, Back, Left, Right, Top, Bottom) * Orient the headphone so that it is sitting on each face of "the cube" sequentially. For example, start with the headphone positioned normally (bottom face of the cube down). Then rotate it so that the right side of the cube is facing down. Then continue through the rest of the faces of the cube. * Hold the headphone in each position for 1 second * Once all the faces of the device have been rotated, set the headphone down on a stationary surface for 2 or 3 seconds.
  • For headphones with Version 4.0 of the Firmware, the first update will be done via USB cable, and after the first update, all subsequent updates will be delivered over the air. For headsets with version 5.0 of the firmware, all updates will be delivered over the air, via the app
  • Unfortunately, there is no volume control on the inline microphone. You have the options to answer phone calls, skip tracks and pause and play.
  • Yes, the cable is detachable.
  • The JBL Quantum 100 is not equipped with JBL QuantumSURROUND. You can consider to purchase the JBL Quantum 300, which comes with a USB dongle and access to JBL QuantumENGINE. 
  • The JBL Quantum 200 is not equipped with JBL QuantumSURROUND. You can consider to purchase the Quantum 300, which comes with a USB dongle and access to JBL QuantumENGINE. 

  • Yes, this headphone features a three button microphone that features volume control, track control, and can receive phone calls.
  • No, the Reflect Mini BT does not feature the automatic shut off.
  • Yes, this headphone features a one button microphone that gives you the ability to pause/play, skip tracks, and answer/hang up phone calls.
  • Yes, the Y50BT volume controls are located on the bottom of the right ear cup. You also have the power/pause/play and track controls located on the bottom right ear cup of the headphones.
  • If the Wi-Fi indicator has all 3 LED lights on, then the signal to the speaker is extremely good, and if only 2 LED light up, then the signal will be good. If you only have 1 LED light or No LED light we suggest moving the speaker to a different location for a better Wi-Fi signal and better audio experience.
  • Yes. The UA Train features a detachable audio cable with a one button remote. (Please note: you cannot use bluetooth or TalkThru when using the cable connection.)
  • Yes. You have the ability to control the volume which is located on the RIGHT arm of the neckband.
  • Yes. The 600BTNC features an audio cable that you can use if you do not wish to use the headphones via wirelessly.
  • No. Because it features a one button universal microphone, it does not give you the ability to control the volume.
  • Yes, the T205 features a one button universal microphone that gives you the ability to pause/play, answer/hang up calls, and skip tracks.
  • Yes, the T110BT features a three button inline microphone which allows you to pause/play skip tracks, answer calls and control the volume.
  • Yes, Soundgear supports aptX LL (Low Latency). (aptX is a way of packing more information into a compressed version of a signal).
  • The soundbar passes through content from a 4K video source but does not upscale video to 4K.
  • How does the brain tell where a sound is coming from? The slight difference in the arrival time of a sound between two ears helps you understand the angle of the sound source from the head. Everyone hears a little differently based on their individual anatomy. This is why it’s important for the QuantumENGINE to know your height and head size—it adjusts to provide the most precise experience possible.
  • No, the HDMI connection is used for audio return channel only, there is no on-screen display function to show settings on the TV screen.
  • Yes, the volume control buttons are located on the LEFT arm of the neckband.
  • Yes. You can configure the volume of the mic monitoring in JBL QuantumENGINE. And the default setting of the mic monitoring is set of “OFF”.
< 1 ... 44 45 46 47 48 ... 60 >

Can’t find what you’re looking for?

Call us

Call us

To speak to our customer service specialist

1800-102-0525

Mon to Sun 10 AM to 7 PM IST

message

Message Us

Chat with a support agent via Whatsapp at:
91 70658 44446

Mon - Sun: 10:00 am - 7:00 pm (IST)