How To
How To
1413 results
-
Yes. The E65BTNC headphones have the ability to pair and connect to two devices at the same time.Was this helpful? Thank you for your feedback!
-
Yes. The E45/E55BT headphones have the ability to pair and connect to two devices at the same time.Was this helpful? Thank you for your feedback!
-
Yes, these headphones can be connected and paired to two devices at the same time.Was this helpful? Thank you for your feedback!
-
To pair and connect to a different device, press and hold the bluetooth button located on the bottom of the right ear cup until you hear the audible voice stating "looking for device." Make sure the the device you are trying to connect to are in search mode. The headphones should display on "Discoverable Devices" within 2-3 seconds. Choose the Pair option and you should hear the audible voice state "connected" and the LED light should transition into a slow blinking blue light.Was this helpful? Thank you for your feedback!
-
Yes, Once you've added your UA Sport Wireless Heart Rate to the UA Record mobile app any workout started on your UA Band will automatically connect to the headphones if powered on and present. The Band will indicate the heart rate sensor is connected and begin showing your heart rate zones using the color LED on the side of the Band.Was this helpful? Thank you for your feedback!
-
It is not possible to connect the Citation Multibeam 1100 to the Citation Towers.
Was this helpful? Thank you for your feedback! -
No, Soundgear is wireless Bluetooth only, and needs to be charged to play music. But the BTA 20 transmitter must of course be connected with a cable to the signal source.Was this helpful? Thank you for your feedback!
-
Yes, provided that your computer supports A2DP Stereo audio streaming over Bluetooth, you can connect to JBL EON 208P and EON ONE. If your computer can connect to a mouse, a keyboard or a printer with Bluetooth, but not the EON speaker, please check if A2DP is supported. If it is not, ask the provider or manufacturer of your computer how to establish A2DP support.Was this helpful? Thank you for your feedback!
-
Yes, Control Xstream uses both 2.4 GHz and 5 GHZ wi-fi networks.Was this helpful? Thank you for your feedback!
-
No, that is not possible. You can only connect it to WiFi through the settings menu of the BDS. Find your WiFi network and type in password, then your BDS is connected to the network. Or you can use LAN connection.Was this helpful? Thank you for your feedback!
-
No, it's not possible to connect simultaneously from multiple devices to the Flip 3 SE. If you need a new device to pair with the Flip 3 SE, please press the Bluetooth button the Flip 3 SE to enable pairing mode. The Flip 3 SE should be available in the list of Bluetooth devices on your mobile phone/tabletWas this helpful? Thank you for your feedback!
-
No. The two Soundgears can connect to the BTA, but not to each other. Also, when using one Soundgear, the use of aptxLL may result in a delay. If you are connected to two, the delay may be more noticeable, since LL is no longer active.Was this helpful? Thank you for your feedback!
-
No, you can only have one activate device connected to the speaker. Please un-pair your current Bluetooth device, then connect with another device if needed.Was this helpful? Thank you for your feedback!
-
You can connect up to 3 Bluetooth devices at the same time. In case you are listening to music via Bluetooth, each device will override the other when a command (play) is selected.Was this helpful? Thank you for your feedback!
-
No, for now it is only possible to connect two speakers together using the JBL connect feature. Newer JBL products feature JBL Connect+, which allows you to connect > 100 devices simultaneously, these however are not compatible with older JBL products featuring JBL ConnectWas this helpful? Thank you for your feedback!
-
Yes, you can definitely connect two wired devices at the same time. However, the Boost TV will only pass one connection at a time. If two connections are playing at the same time, the optical device will take priority.Was this helpful? Thank you for your feedback!
-
SB 250 will only pass one connection at a time. If two connections are playing at the same time, then the optical device will take priority.Was this helpful? Thank you for your feedback!
-
Yes, in the HDMI Setup Menu, you can select either Sound To TV or to Amp, (which is the AVR 70). This detail is not mentioned in the owner's manual.Was this helpful? Thank you for your feedback!
-
Yes, in the HDMI Setup Menu, it is possible to select either �Sound To TV� or �Sound To Amp�, Amp being the AVR. This detail is not mentioned in the owner's manual.Was this helpful? Thank you for your feedback!
-
Yes, press Volume - and Connect button at the same time for 5 seconds. A voice reads out a set of numbers, which is the current software version. Using the HID Software Tool, available in the Manuals & Downloads section, you can find out if an update exists, and if so, install the update.Was this helpful? Thank you for your feedback!
-
Yes, the N40 is equipped with three different sound filters to provide you with personalized sound tuning capabilities. The sound filter options are bass boost, reference sound and high boost.Was this helpful? Thank you for your feedback!
-
Sorry, this is not possible.Was this helpful? Thank you for your feedback!
-
Sorry, this is not possible.Was this helpful? Thank you for your feedback!
-
You can't use standard rechargeable batteries with the K912. If you still have the original batteries, and compare them to the generic batteries you are trying to use, you will see the difference on the - ( minus ) side of the battery. On the original battery that comes with the headphones, there is a bare metal band on that side, which connects to a sensor in the headphones ( you can also see this sensor inside the battery compartment, on the - side ). A generic rechargeable battery does not have this metal band for the sensor, so the charger won't charge them. This is for protection, in case you have non-rechargeable batteries in the headphones and put them on the charger. This could cause damage to the headphones.Was this helpful? Thank you for your feedback!
Can’t find what you’re looking for?
Message Us
Chat with a support agent via Whatsapp at:
91 70658 44446
Mon - Sun: 10:00 am - 7:00 pm (IST)