How To

Support Overview / How To

How To

435 results
  • How to switch between Active Noise Cancelling and TalkThru
    Onboard Active Noise Cancelling is controlled by the multi-function button on the rear of the left ear-cup. Switched on by default, you can SINGLE press the ANC button to toggle it On/Off  and LONG press to active TalkThru. Turn on ANC again by a single press on the multi-function button.
  • How to show the current software version
    To show the current firmware version on your JBL TUNER device, go through the following steps.
    1. Turn on the JBL TUNER.
    2. Press and hold this three-button combination: DAB/FM+ Volume+ and Preset 5, simultaneously for 3-4 seconds.
    3. In the display, you will see a combination of letters and numbers. This is the current software version.
    4. See picture below as illustration.
    Tuner Software

    The new firmware version released is V.0.0.57 (shown in the picture above).
    To get the latest version, ask our customer service for a guide and an upgrade file.

     
  • How to set up your microphone

    Ensure that only one voice chat application is in use while in-game. Be sure you hear a click when the microphone is flipped down. The microphone will only function when it is flipped down fully. If you see a red LED on the microphone, it is muted.
    FLIP DOWN.png


    How to check your PC settings for the correct recording device
    1. Go to Control Panel
    Control panel.png
    2. Select Hardware and Sound
    Step 2.PNG
    3. Click on Sound
    Step 3.PNG
    3 Select  Recording
    Recording tap.jpg

    4. Make sure to select the proper recording device.

    1. Right-click on it Quantum headset.

      Set default communication device.jpg

    2. Now select "Set Default Device" or Select "Default Communication Device"

      Set default communication device 2.jpg

    5. Check the microphone levels by right-click on your Quantum headset. Then click on Properties
    Properties.jpg

    6. Choose Levels.
    Levels 1.jpg

    7. Adjust accordingly.
    Levels 2.jpg  

    Please also make sure the volume control on the headset is turned up. Rotate the volume wheel on your headset to increase the volume.
    Check that your headset's Game-Chat balance dial and ensure that the balance is correct, you might refer to the screenshot below from the QuantumEngine PC software.
    Volume issue Q800 - Part3.png

    If you still cannot hear the game or music audio, or if the volume is still very low, check if the TalkThrough is activated via the QuantumEngine software.
    Volume issue Q800 - Part4.png

    Finally, you can also do a short press on the Smart Ambient button on the headset (if your headset, has this feature)
    Volume issue Q800 - Part5.png

  • How to set up your microphone
    Ensure that only one voice chat application is in use while in-game. Be sure you hear a click when the microphone is flipped down. The microphone will only function when it is flipped down fully. If you see a red LED on the microphone, it is muted.

    Check that the PC is using the correct recording device.

    1. Go to Control Panel

    2. Select  Sound 

    3 Select  Recording

    4. Make sure to select the proper recording device.
    1. Right-click on it Quantum headset.
    2. Now select "Set Default Device" or "Select Default Communication Device"
    5. Check the microphone levels by right-click on your Quantum headset.

    6. Go to Properties

    7. Chose Levels and adjust accordingly
  • How to set up your microphone
    Ensure that only one voice chat application is in use while in-game. Be sure you hear a click when the microphone is flipped down. The microphone will only function when it is flipped down fully. If you see a red LED on the microphone, it is muted.

    Check that the PC is using the correct recording device.

    1. Go to Control Panel

    2. Select  Sound 

    3 Select  Recording

    4. Make sure to select the proper recording device.
    1. Right-click on it Quantum headset.
    2. Now select "Set Default Device" or "Select Default Communication Device"
    5. Check the microphone levels by right-click on your Quantum headset.

    6. Go to Properties

    7. Choose Levels and adjust accordingly
  • How to set up your device with Android or iOS
    1. Power on your JBL LINK speaker.
    2. Verify that you are connected to the right Wi-Fi network on your smartphone.
    3. Open your Google Home app Google Home app.
    4. Enable Bluetooth BT ICON
    5. Enable Location Service location icon(Android Only)
      1. Make sure you have permitted the Google Home app to view your location.
    6. First option NEXT oPTTap Addaddd Next topSet up device Setup device NEXT opSet up new devices in your home home icon
    7. Second  option NEXT NEXTTap Disocvery Next topX device found Setup ICON deviceNEXT opSelect Home locationhome icon
    8. Follow the instruction on screen to add your new JBL LINK speaker.

    You are now all set and can enjoy your LINK device!
  • How to set up your device to your Wi-Fi network
    Download the Google Home app, available for iOS and Android versions. 1. Open the Google Home app. 2. Plug in power for your Enchant 800 or Enchant 1300 Soundbar. 3. Enable Bluetooth. 3.1. Enable Location service on your phone and permit Google Home app to view your location (Android only). 4. Click setup device in your Google Home app. 5. Follow the instructions provided in the app, and enjoy Chromecast streaming for your Enchant soundbar!
  • How to set it up to your Wireless network

    What you need first

    • A Harman/Kardon Enchant Soundbar (1300 or 800 model).
    enchant
    • Latest version of the Google Home appGoogle Home app
    • A mobile device or tablet with Android or iOS system.
    • An internet connection.
    • Dual-band router with 2.4GHz and 5GHz connection

    Adding your Enchant soundbar to your Wi-Fi

    1. Open the Google Home appGoogle Home app
           Google home
    1. Click on "ADD" to connect your Enchant 800 or Enchant 1300 Soundbar to your Wi-Fi network.
    2. Follow the instructions on screen and enjoy beautiful sound using Chromecast technology.


    Setup your enchant
  • How to restore your device back to Factory default settings
    1. Power on the Enchant 800 or Enchant 1300 Soundbar. 2. In any source mode, press the power and source button for 5 seconds. 3. The Enchant 800 or Enchant 1300 will power off automatically and turn on again. 4. Your device is now reset back to default Factory settings. 5. You can now redo the setup through the Google Home app or pair with a new smartphone or tablet.
  • How to restore back to factory settings

    Resetting the device

    top panel
    1. In any source mode, press and hold the power button power and Source button source for 5 seconds.
    2. When the factory settings restore is complete, the soundbar automatically turns off and restarts.
    3. You can now set it up via Google Home app Google Home app again or connect any new Bluetooth devices.
  • How to reset your HK ADAPT+ device
    On the bottom of your ADAPT+ there is a reset button. Hold it down for 5 seconds, until the round button LED lights up in white. The product is now reset and ready to be set up again.
  • How to reset Tune 500/600 BT Headphone
    In order to reset the headphones: 

    Long Press of volume + and volume - at the same time while the unit is on. Make sure that bluetooth is NOT on and connected to any device. 
    When reseting, LED will blink faster. 
< 1 ... 17 18 19 20 21 ... 37 >

Can’t find what you’re looking for?

Call us

Call us

To speak to our customer service specialist

1800-102-0525

Mon to Sun 10 AM to 7 PM IST

message

Message Us

Chat with a support agent via Whatsapp at:
91 70658 44446

Mon - Sun: 10:00 am - 7:00 pm (IST)