How To

Support Overview / How To

How To

1413 results
  • There are times when my smart phone stops charging when attached to the wireless charge arm on Smartbase.
    This can be caused by the charge arm reaching its thermal temperature cutoff. This is a safety feature to prevent a potential risk. For proper heat dissipation, always be sure to have the charging arm in the open position when your smart phone is attached.
  • The Noise Cancellation we are using in our JBL TOUR Series
    True Adaptive NC available on Tour One enables real-time monitoring of exterior surroundings and personal attributes like movement, hair, eyeglasses, and automatic adjustments to the NC performance and EQ.

    If you don’t prefer the canceling performance's automatic change, you can get a fine-tuned canceling level by choosing “Everyday Mode” in the app.

    Adaptive Noise Cancelling - available on Tour Pro+ TWS - listens to ambient environmental noises using external and internal mics then creates the inverse phase back to the listener creating the noise “canceling” effect.
    The headphones also allow the listener to adapt or adjust noise cancellation through features like Ambient Aware and TalkThru.
  • The Max power output for our power banks
    For 5,000 models, the Max power output is 18W total.
    For 10,000 models, the Max power output is 30W total.

    It means when charging more than one device simultaneously, total max. output is 18W for 5,000 models and 30W for 10,000 models.
    You can also check detailed power output information from the specification on the product page.
  • The max power output for our chargers
    For 20W charger, the max. power output is 20W total.
    For 30W charger, the max. power output is 30W total.
    For 65W charger, the max. power output is 65W total.
    For 100W charger, the max. power output is 100W total.
    For 30W, 65W and 100W chargers, when charging more than one device simultaneously, total max. power output is 30W, 65W and 100W, respectively. You can also check detailed power output information from specification on product page.
  • The LED Charging light information
    The LED light will be on when the InfinityLAB charger is being powered and it is ready to charge your devices.
    The LED light will be off when the power source is off.
  • The JBL Micro Wireless is not completely mute when I turn the volume on a Bluetooth source unit to minimum.
    Even when reducing volume to minimum on the Bluetooth source unit, it does not reduce the audio signal to zero. In this case the Micro Wireless will playback music at a very low volume.
  • The fan in my AVR never seems to come on. Can I test the fan to make certain that it works?
    Your model AVR is equipped with a cooling fan that only comes on when the unit's internal temperature rises above a predetermined limit. Thanks to the massive heat sinks used in the AVR series, this temperature is rarely reached. A typical situation where the fan will come on is when the AVR is operating at a very loud volume level with program material that has sounds in all seven channels. Since this is a rare occurrence, you may never notice the fan working. In any case, when the fan does come on, the volume will be loud enough that you might not notice it. Thus, you may own an AVR for many years and never hear the fan, or see it in operation. There is no way to test the fan, and none is needed.
  • The differences between High ANC and Low ANC modes
    • HIGH is recommended for Airplanes, City Streets, or other noisy environments.
    • LOW is suited for lower noise or windy environments.
    • ADAPTIVE will automatically adjust the noise-canceling based on your immediate environment.
    • OFF provides passive noise isolation.
  • The cooling fan on the back panel rotates from the moment I switch the BDS on, and it keeps running after I put the unit into Standby.
    Be aware that the BDS X75 and X77 have two power modes. By pressing the power button briefly, the unit goes into sleep mode, and the fan keeps cooling the unit. Holding down the power button for a couple of seconds puts the BDS into standby, and the fan stops.
  • The compatibility list for our power banks
    The InfinityLab power bank should work with most devices and we have provided a list of normal devices on each model’s product page. 
  • The charging technologies our power bank are using
    The InfinityLab power bank support Power Delivery 3.0 to provide you with a fast charging experience. 
  • The Bluetooth pairing acknowledgment signal is very loud. Is it possible to reduce the volume of this signal, or will there be a software upgrade that changes the volume?
    It is true that some Bluetooth products have a very loud BT acknowledgment tones. We are sorry, but the level of such tones cannot be changed, and no software solutions will appear.
  • The best way to clean your LINK BAR
    To clean your LINK BAR, use a soft dry Microcloth to remove dust and dirt.
    We wouldn't recommend using any alcohol as it may harm the product.
  • The battery capacity (size) of our Power Banks
    InfinityLab 5,000 power bank is 18.65Wh, and 10,000 power bank is 38.5 Wh.
    For all versions available (Lightning, USB-C and Wireless).
  • The audio is not centered to my monitor, what should I do?
    If the audio is not centered to your monitor, then you can re-center your headset by doing the following: 1. Position yourself in front of your monitor. 2. Press the re-centering button on the side of your headset (button that looks like a circle) 3. The head-tracking sensor will start the automatic calibration.
  • The app does not open if the headphone is not ON. Is this correct?
    Yes, the app only works when the headphone is powered ON and paired to a source device that has the app available.
  • The 4 LED dots change to amber on my JBL LINK 10, 20, 300 or 500 speaker. What does this mean?
    The amber LED lights indicate that you have muted the microphone and the Google Assistant. The JBL LINK will not react to any voice keywords unless you unmute the microphone.
  • The 4 LED dots change to amber on my Citation speaker. What does this mean?
    The amber LED lights indicate that the microphone is muted and the Google Assistant will not react to any voice keywords until the microphone is unmuted.
  • TalkThru Technology
    To activate TalkThru Technology, press the LEFT ear for a short press for 1 Second which allows you to clearly hear others for quick conversations without removing headphons. Music volume level should lower when TalkThru is engaged. Press again for 1 second to turn off Talk Thru.
  • TalkThru and Ambient Aware Information
    With TalkThru Technology, music is lowered and speech is amplified so you can easily have quick chats. AmbientAware delivers a more immersive music experience while increasing ambient sounds, providing the safety of hearing your surroundings. You can control them via the buttons on the ear cup and with the My JBL Headphones app
  • T110BT Headphones: Power and Pairing Information
    To power on the headphones, place one of the headphones inside your ear and press and hold the center button on the inline mic. You should hear the audio chime and a blue blinking light should appear at the top of the inline mic. If this is your first time connecting to a device, it should immediately go into pairing mode. The device should recognize the T110BT headphone. Once you select that option, you will hear the confirmation tone. If you are trying to connect to a different device, turn the headphones on and press and hold for 3-5 seconds for the headphones to start searching for a different device. The headphones should appear on your discoverable devices within a few seconds. You should hear the audible tone and then the confirmation chime once it is connected. You will see the Bluetooth light alternate between red and blue when it is in pairing mode and then to a slow blinking LED blue light once it is connected to your device.
  • Switching or Changing to a new Wireless Network

    Switching to a new Wi-Fi network

    1. Make sure your mobile device is connected to the same Wireless Network as your speaker.
    2. Open your Google Home app Google Home app
    3. Go to Settings Settings
    4. Tap on Wi-FI nextForget Network
      1. The current configuration is now forgotten.
    5. In your Google Home app, you are forced back to the "Home Screen" and need to setup the device again.
    6. Tap on House
    7. Find Add Add devcenext  Set up device next Set up new devices in your home
    8. Follow the instructions given to add the speaker to your Wi-Fi network.

    Lost connection or changed settings

    1. Open the Google Home app Google Home app
    2. On the home screen, tap on AddAdd devcenextSet up device next Set up new devices in your home
    3. Follow the instruction provided.
      1. Remember that your current room name is the same as before, as well as other settings made for the speaker. You are only switching to a new Wi-Fi.
    4. In addition, you can click on Discovery discover icon in the bottom menu of the Google Home app.
    5. Tap on the Setup new setup icon nextThe Card information would show your old speaker name.  However, you can continue setting up the device following the instructions.
     

     

  • Sweatproof Information (IPX4)
    This unit is IPX4 rated, which means that it is sweatproof (suitable for working out) and can withstand water splashes from any direction. However, the unit is not waterproof and should never be submerged in water.

  • Surround Sound formats
    Harman Kardon Radiance 2400 can decode Dolby Audio and DTS.

    Dolby Atmos is not supported, but will be rendered as Dolby Audio.
    Dolby Digital 5.1 and DTS Surround (2.0 and 5.1) is supported, but will be downmixed to 2.1/2.0.
    DTS Master Audio is not supported.
< 1 ... 13 14 15 16 17 ... 60 >

Can’t find what you’re looking for?

Call us

Call us

To speak to our customer service specialist

1800-102-0525

Mon to Sun 10 AM to 7 PM IST

message

Message Us

Chat with a support agent via Whatsapp at:
91 70658 44446

Mon - Sun: 10:00 am - 7:00 pm (IST)