How To
How To
435 results
-
The ADAPT+ is made to connect an external subwoofer. The subwoofer needs to be an active device, which means that it must have its own, built-in amplifier.Was this helpful? Thank you for your feedback!
-
It is not uncommon to have charging problems with True Wireless headphones. You may encounter that charging stops, does not start at all or that one of the ear buds suddenly switches on and begins the pairing process. This is almost always caused by dirt on the metal charging contacts. These contacts are vulnerable because they can easily be contaminated by sweat, skin grease, or ear wax. They are usually gold plated, but gold plating does not prevent surface dirt.
If you have charging problems, the first step is to always clean all contact points, on each earbud and on the charging case.
You will need: cotton cloth or makeup swab, cotton swabs and rubbing alcohol. Also a pencil with eraser for further cleaning.
Use a cotton swab with some rubbing alcohol to clean the charging terminals of the headphones. Rotate the swab and scrub lightly on each contact surface, then use a cotton cloth to remove any dust and cotton residue left on the headphones. It is important to perform this process periodically to keep your headphones clean, thus avoiding affecting the charging speed/quality.
Wipe the contact pins in the charging case with a clean cotton swab. The swab can be slightly moistened with rubbing alcohol, but it is important that the interior is completely dry before closing the box. Use the cotton cloth and wait for it to dry.
Repeat until the contact points are visibly clean, and charging should work as designed.
Try cleaning the contacts with the tip of a pencil and the eraser at the end of the pencil, the graphite and rubber can help to re-establish charging also.
This procedure can be performed on all TWS earphones and cases.Was this helpful? Thank you for your feedback! -
General information about WiSA:
WiSA is a wireless system designed specifically for audio and speakers. An audio system that incorporates WiSA technology has it's own internal wireless system. It is capable of doing 96kHz/24bit audio with an audio latency of only 5ms, virtually undetectable by the human ear.
For more information on WiSA technology, please go to the official WiSA website.
If a product is WiSA Certified, it can be used with any other WiSA certified product. For example a WiSA Ready TV with at transmitter.
Note: The overall sound quality is dependent on the processing and setup in the WiSA TV & transmitter, and may result in a performance (EQ, crossover and levels) not intended by the speaker manufacturer. To be sure that the Citation products sound the best, use a Citation Bar product as the main "hub".
Citation Surrounds
Current WiSA Certified products:
Citation Sub
Citation Sub S
Citation Towers
Citation Bar
Current products making use of WiSA technology:
Citation Multibeam 700
HK surround
WiSA does not offer 3D audio formats like Dolby Atmos, and DTS:X yet, so at the moment it is limited to 5.1 or 7.1 Dolby Digital. So regardless of which brand of WiSA speaker you choose, Dolby Atmos will not be available yet.
Limitations:Was this helpful? Thank you for your feedback! -
To charge the headphones, place inside charging case. While charging, both LEFT and RIGHT ear bud will display a sold red light. Once the headphones are fully charged. The red light will turn OFF. When the charging case is fully charged, the white LED's will light up accordingly. Battery life can last for 10-hours per charge. You may recharge your earphones for another 40-hours playtime with the charging case. It takes 2 hours to fully charge the charing case.Was this helpful? Thank you for your feedback!
-
No. Bluetooth does not work under water. The Endurance DIVE however has a built-in MP3 player for music, and is IPX7 waterproof. This means you can use the headphones submerged to 1 meter depth, up to 30 minutes at a time. Also note that for normal swimming, you won't be submerged all the time, so the headphones should be waterproof for the duration of your swim.Was this helpful? Thank you for your feedback!
-
You have the option to turn the Noise Cancellation on and off by using the switch that is located on the right side of the NC box. When choosing the switch option, you will see a green light inside the the switch will indicate that the Noise Cancelation is on. To turn off the Noise Cancelation, move the switch down towards the cable and the green light will turn off. When charging this device with the micro USB charging cable included in the packaging, you will see the light turn orange to indicate that it is charging.Was this helpful? Thank you for your feedback!
-
Yes. To take a call from the Live 200BT press the center button located on the RIGHT neckband for 1-2 seconds. To hang up, simply press the center button again.Was this helpful? Thank you for your feedback!
-
Yes. A built-in microphone combined with a patented echo cancellation system secures clear and easy phone conversation. If a phone call is received while listening to music just push play button to answer the call. No need to find or touch the phone. This hands-free functionality can even be used for phone conferencesWas this helpful? Thank you for your feedback!
-
Locate the power button on the back of the right ear cup. Gently slide the spring loaded power button up for 2-3 seconds and release. Once turned on, it will display a solid white light. If this is your first time powering on the device it should automatically go into pairing mode, and will display a fast blinking blue light. Make sure the device you are attempting to connect to is in search mode. The headphones should pop up on your list of discoverable devices within 3-5 seconds, and connect. Once connected, you will see a solid blue light above the power button.Was this helpful? Thank you for your feedback!
-
Unfortunately, the Y50BT headphones cannot be paired to multiple devices at the same time.Was this helpful? Thank you for your feedback!
-
Because bluetooth cannot travel through water, the only Endurance model that is used for swimming is the Endurance DIVE model. The Endurance DIVE model features an MP3 player which allows you to listen to music under water without using bluetooth. Furthermore, only DIVE features a function lock, which prevents water from activating functions inadvertently. SPRINT and JUMP do not have this lock function, and will not work under water.Was this helpful? Thank you for your feedback!
-
The JBL Endurance SPRINT, JUMP and DIVE can be used in salt water (i.e. sea) but we recommend to thoroughly wash the headphones in fresh water after every use in salt water, to remove the salt residue. Please note that only DIVE can actually be used in water, because it features a function lock and a built-in memory for MP3 music files. SPRINT and JUMP cannot be used in water, because the touch buttons will malfunction when submerged, and Bluetooth cannot function at all under water.Was this helpful? Thank you for your feedback!
Can’t find what you’re looking for?
Message Us
Chat with a support agent via Whatsapp at:
91 70658 44446
Mon - Sun: 10:00 am - 7:00 pm (IST)