How To

Support Overview / How To

How To

1413 results

Sort

Page size

Which Connections are Possible
Connecting a USB stick
1. You can enjoy music from your USB Stick directly into the Partybox device.
2. Insert the Stick into theport, located on the back of your Partybox.
3. The USB Stick has to be formatted FAT16 or FAT 32 and supports MP3, WAVE and WMA Music files.
4. It will start automatically playing the content on your USB stick.
AUX Connection
1. You can connect any devices through the analog connection
2. Use an analog cable (Not included in the box) and connect your device.
3. Press play on your external device and enjoy the music!
RCA Connection (*Partybox 200/300/1000 Only)
1. The Partybox features both Input and Output RCA connection.
2. Connect your RCA cable (not included) to either one of the ports.
3. You can use it with your DVD/BlueRay player or AVR system.
Guitar and Microphone
1. Connect your to the dedicated port or connect your electric to the
2. You can mix sound or make your own karaoke party with your Partybox.
3. Sing or play through your devices.
  1. To adjust the volume of the audio source, press volume+ or volume- buttons.
  2. To adjust the volume of the microphone or guitar, rotate the or
Charging external devices
1. Whenever your mobile device needs some extra power, the Partybox can help you!
2. Featuring a USB Charging port for both Music (USB on a stick) or when you need to charge your device.
3. Simply connect your device to the port and start charging.
  1. NOTE: The Partybox 200 needs to be connected to AC power all the time to charge or function as a speaker.
  2. The Party 300/310 has a battery and can charge any device without needing AC power (unless the product's battery is depleted then you need to recharge via AC power).
There are many ways to enjoy your JBL Partybox On-The-Go, 100, 200, 300, 310 & 1000. The options are endless and you are in control of the party
Was this helpful? Thank you for your feedback!
Which configuration is best to use for your OMNI BAR+ or ADAPT+

For OMNI BAR+, three sources are available: HDMI (not applicable for ADAPT+), Optical or AUX input. For Adapt+ two sources are available: Optical in/outputs and Analog in/outputs. If you select "Watching movies and TV shows" in the HK controller app for either one of them, you will have a very little delay and good lip sync with the TV for video applications. However, you will not be able to rebroadcast the TV signal to other OMNI+ speakers when selecting this mode. If you select "Listening to music", you will be able to rebroadcast TV signal to other OMNI+ speakers in your house, however, you will have lip sync delay with video material. Select that specific mode if you use HDMI (not applicable for ADAPT+), Optical or AUX for music only. Using Chromecast, Spotify Connect or Bluetooth is not part of these modes. When using one of these streaming methods, you are able to rebroadcast any music source.

Was this helpful? Thank you for your feedback!
Which C-Media processor is used in the No. 585?

C-Media 6632A Processor

Was this helpful? Thank you for your feedback!
Which Bluetooth version does the Aura Studio 2 have?

The Harman Kardon Aura Studio 2 features: Bluetooth v.4.1 A2DP v.1.3 AVRCP v.1.5

Was this helpful? Thank you for your feedback!
Which Audio codecs is supported?

Our LINK BAR supports the following:
MP3, AAC-LC, HE+ACC, FLAC, Vorbis, Wav, CELT/opus via Wi-Fi streaming, and with Bluetooth SBC and AAC.

Was this helpful? Thank you for your feedback!
Which A2DP codec does the SB20 support?

The soundbar support SBC codec.

Was this helpful? Thank you for your feedback!
Where is the serial number on JBL E35?

It is a tiny white sticker, located on the inside of the left-hand size adjustment slider on E35.

Was this helpful? Thank you for your feedback!
Where is the Serial Number located?

The Serial Number is located on the strap hook (see image below), it may be necessary to remove the strap to see it clearly.

Was this helpful? Thank you for your feedback!
Where is the serial number?

On the BT and ELITE NXT series over-ear and on-ear models, the serial number sticker is on the inside of the headband left side, visible when the size adjustment is pulled all the way out. Serial numbers are also shown on the boxes. On ELITE 100 in-ear, it is on the box only.

Was this helpful? Thank you for your feedback!
Where is the microphone positioned?

Under the little hole next to the phone reciever button.

Was this helpful? Thank you for your feedback!
Where is the Heart Rate sensor on the JBL Reflect Fit?

The heart rate sensor is located inside the RIGHT earbud inside the sound tunnel. If the Heart Rate detection is activated and you remove the RIGHT earbud, the audio voice will notify you to insert the ear bud and will recalibrate once it is detected again.

Was this helpful? Thank you for your feedback!
Where is the Heart Rate sensor?

The sensor is located in the LEFT ear bud. The left enhancer will feature a cut out for the sensor and should be fully exposed.

Was this helpful? Thank you for your feedback!