How To
How To
1413 results
-
What you need first
- A Harman/Kardon Enchant Soundbar (1300 or 800 model).
- Latest version of the Google Home app
- A mobile device or tablet with Android or iOS system.
- An internet connection.
- Dual-band router with 2.4GHz and 5GHz connection
Adding your Enchant soundbar to your Wi-Fi
- Open the Google Home app
- Click on "ADD" to connect your Enchant 800 or Enchant 1300 Soundbar to your Wi-Fi network.
- Follow the instructions on screen and enjoy beautiful sound using Chromecast technology.
Was this helpful? Thank you for your feedback! -
Usually, the first time you connect the N90Q to your computer with the USB cable, and turn the headphone ON, it will cause a message to open on your computer, informing you that this new device has been connected, and a software package is being imported. Next time, you may get a warning that your USB device is not recognized by the computer, but that does not mean that the headphone will not work, it just means that you must activate it in the audio control systems. Locate the speaker symbol, which is usually shown at the extreme right in your computer taskbar along the bottom of the screen. Right-click on the speaker symbol. A menu opens, and you must highlight and click on Playback Devices. Now a small window opens, showing the Playback tab, with all available speaker option. One of the options should read something like this: " Speakers. AKG N90 headphones - Firmware version A2.12. Ready." Highlight this option, and then click the "Set Default" button that is now available in the window. Audio should immediately be sent to the N90 headphones as a digital signal, which is then converted and amplified inside the headphones. Now you can enjoy world-class music listening. If the computer will not show N90Q as an option, it is usually a solution to disconnect the headphone, then reconnect it. Sometimes this must be done two or three times before the computer "sees" the headphone.Was this helpful? Thank you for your feedback!
-
If you encounter issues using the speaker with your phone or tablet, or you want to remove all previous Bluetooth pairings from the speaker, it may be necessary to 'factory reset' the speaker.
How to reset
First, remove or forget the speaker from the list of paired Bluetooth devices in the settings of the phone or tablet.
Then, with the speaker powered on, press and hold the Volume + and Play buttons simultaneously for 3 seconds until the unit turns off.
The speaker has now been restored to factory default settings.Was this helpful? Thank you for your feedback! -
1. Power on the Enchant 800 or Enchant 1300 Soundbar. 2. In any source mode, press the power and source button for 5 seconds. 3. The Enchant 800 or Enchant 1300 will power off automatically and turn on again. 4. Your device is now reset back to default Factory settings. 5. You can now redo the setup through the Google Home app or pair with a new smartphone or tablet.Was this helpful? Thank you for your feedback!
-
The reset for the Tuner 2 and Tuner XL is as follows:
Reset to factory default - Long press Preset 1 & Bluetooth buttons for more than 10 seconds.Was this helpful? Thank you for your feedback! -
If you wish to reset your speaker due to various reasons, then keep reading, and follow along. 1. Press and hold Volume+ & Play/pause buttons down at the same time for more than 5 seconds. 2. The Pulse 4 will turn off, indicating that you did a successful reset. 3. Switch your Pulse 4 on again. 4. Connect with your favorite Bluetooth device and enjoy the music! Do you still have problems? Contact our Customer Service for more help!Was this helpful? Thank you for your feedback!
-
With our JBL BAR 5.1 Surround there is two types of resets, one is to reset the WiFi settings and last one is to restore factory default settings.
Let us walk through each one of them.
Resetting WiFi settings- Turn on your JBL BAR 5.1 Surround.
- Press and hold POWER button down for more than 10 seconds.
- All of your WiFi configuration is lost and you need to reinstall it again.
Resetting to Factory default settings- Turn on your JBL BAR 5.1 Surround
- Press and hold POWER and SOURCE button for 3 seconds.
- Your device is now reset.
Was this helpful? Thank you for your feedback! -
The factory reset button restores your device to the default settings, including network and audio configurations.
Please use one of the following solutions:- Press and hold VOL -, VOL +, and Source buttons on the device at the same time until the LED light flashes (hold for more than 5 seconds)
- Open your JBL ONE App.
- Navigate to the support tile.
- Select RESTORE FACTORY SETTINGS.
Was this helpful? Thank you for your feedback! -
To reset your JBL Bar 2.0 or 2.1 back to factory default settings, follow the steps below.
- Turn on your JBL Bar 2.0 or 2.1
- Press SOURCE and POWER buttons on top of the bar at the same time for more than 3 seconds.
- Your soundbar will now power off and on again.
Was this helpful? Thank you for your feedback! -
Resetting the device
- In any source mode, press and hold the power button
and Source button
for 5 seconds.
- When the factory settings restore is complete, the soundbar automatically turns off and restarts.
- You can now set it up via Google Home app
again or connect any new Bluetooth devices.
Was this helpful? Thank you for your feedback! - In any source mode, press and hold the power button
-
On the bottom of your ADAPT+ there is a reset button. Hold it down for 5 seconds, until the round button LED lights up in white. The product is now reset and ready to be set up again.Was this helpful? Thank you for your feedback!
-
In order to reset the headphones:
Long Press of volume + and volume - at the same time while the unit is on. Make sure that bluetooth is NOT on and connected to any device.
When reseting, LED will blink faster.Was this helpful? Thank you for your feedback!
Can’t find what you’re looking for?
Message Us
Chat with a support agent via Whatsapp at:
91 70658 44446
Mon - Sun: 10:00 am - 7:00 pm (IST)