How To

How To

1413 results
  • Press and hold the 'DAB/FM' & 'Preset 1' buttons for more than 2 seconds. The Horizon 2 is now reset to the default factory settings.
  • Resetting the Partybox to Factory Settings

    1. Press and hold "Play/Pause" and "Volume +" down for > 10 seconds.
    2. The JBL Partybox will power off and back on and is now reset.
  • Resetting the SOUNDSTICKS 4 to Factory Settings

    1. The unit must be on
    2. Press and hold Power and Bluetooth buttons for > 10 seconds
    3. The unit is reset
  • Power on the JBL Pulse 3 For 5 seconds, press and hold the "Volume +" and "Play" buttons The JBL Pulse 3 will power off, and is now reset
  • In power ON mode press and hold the "Volume +" and "Play" buttons at the same time for more than 3 seconds -> Unit will power Off by itself. Now the unit is reset to factory default.
  • Press and hold the 'Volume +' and 'Bluetooth' buttons simultaneously for > 2 seconds (> 5 seconds for the Onyx Studio 8), until the speaker powers off.
    The Onyx Studio is now reset to factory settings.
  • Press and hold the Phone and VOL + button simultaneously.
    After 5 seconds, the unit powers Off, and is now reset.
  • In power ON mode press and hold the "Volume +" and "Phone" buttons at the same time for more than 3 seconds -> Unit will power Off by itself. 
    Now the unit is reset to factory default.
     
  • Restore to factory settings:
    In power ON mode, press and hold the Power Button for at least 10 seconds, until the volume and input selector lights begin to flash.
    Reset to factory default includes Source, Volume settings, EQ settings, AirPlay name and Wi-Fi settings.

  • Resetting the Partybox to Factory Settings

    1. Press and hold "Play" and "Light" buttons for > 10 seconds.
    2. The Partybox will power off and back on and is now reset.
  • Press and hold the Volume down and Voice assistant button simultaneously for more than 10 seconds. The speaker will play a sound to confirm.
  • What You Will Need

    1x Pair of Replacement Ear Cups (Part Numbers Below) 
    1x Medium to Large slotted Screwdriver

    Everest 300/Elite 300

    SC-HM20000200-B  LEATHER CUSHION (R) BLACK 300NXT
    SC-HM20000100-B LEATHER CUSHION (L) BLACK 300NXT
    SC-HM20000500-B LEATHER CUSHION (R) WHITE 300NXT
    SC-HM20000400-B LEATHER CUSHION (L) WHITE 300NXT

    Everest 700/Elite 700
    SC-HM21000200-B LEATHER CUSHION (R) BLACK 700NXT
    SC-HM21000100-B LEATHER CUSHION (L) BLACK 700NXT
    SC-HM21000800-B LEATHER CUSHION (R) WHITE 700NXT
    SC-HM21000700-B LEATHER CUSHION (L) WHITE 700NXT

    Removing the Ear Cups
    1. Place the headphones on a table and while holding the ear cup with one hand gently and slowly insert the tip of the screwdriver between the ear cup and headphones.
    2. Once inserted gently twist the screwdriver until there is a slight separation between the ear cup and the headphones. Note: Do not twist the screwdriver too much as this may damage the headphones.
    3. Continue step 1 and 2 moving the screwdriver until there is gap between the cup and the headphones all the around the cup.

    Installing the New ear Cups

    1. Hold the ear cups tightly with one hand while holding the headphones with the other and gently pull until the cup is completely separated. Note that some headphones may have more adhesive than others so more pressure might be required to remove the ear cup. 
    2. Find the replacement ear cup that matches the side removed (they are labeled L and R inside the cup). Align the letter in the cup so that it is legible with the bar at the top.
    3. Gently press the ear cup into place ensure that the pins remain aligned.
    4. Once there is a slight click sound press more firmly to set the ear cup into place.
< 1 ... 59 60 61 62 63 ... 119 >

Can’t find what you’re looking for?

Call us

Call us

To speak to our customer service specialist

1800-102-0525

Mon to Sun 10 AM to 7 PM IST

message

Message Us

Chat with a support agent via Whatsapp at:
91 70658 44446

Mon - Sun: 10:00 am - 7:00 pm (IST)