JBL Intonato 24

JBL Intonato 24

24-Channel Monitor Management Tuning System

Getting started with your JBL Intonato 24

Getting started with your JBL Intonato 24

Quick Start Guide

Get up and running in no time with our easy-to-follow Quick Start Guide

Product Registration

Register your product

Do you own this product? Register it here! And claim your warranty or service easily

Register now

Documents & Downloads

Product Specifications

BLU LINK AUDIO Connectors
2 x RJ45 connectors
Maximum Cable Length
100m/328ft on Category 5e or higher cable between devices
Latency
11/Fs [0.23ms@48k, 0.11ms@96k]
Pass Through Latency
4/Fs [0.08ms@48k, 0.04ms@96k]
WORD CLOCK INPUT Supported Sample Rates
44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz Tolerance
A/D Converter
24-bit
A/D Dynamic Range
114 dB A-weighted
D/A Converter
24-bit
D/A Dynamic Range
115 dB A-weighted
Internal Processing Word Length
32-bit floating point
Supported Sample Rates
44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz; 32-192 kHz, sample-rate convertors enabled.
Dynamic Range
114 dB A-weighted; 112 dB unweighted
THD+Noise
0.007% typical at +4 dBu, 1 kHz, 0 dB input gain
Frequency Response
20 Hz – 20 kHz, +0 /- 0.5 dB
Latency
Analog IN to analog OUT (96 kHz)
AES IN to analog OUT (96 kHz)
2.15 ms
BLU link input to BLU link output (96 kHz)
0.04ms
Included Speaker Tuning Presets
JBL 705i, 708i, M2
User EQ
8-band fully parametric EQ w/ selectable filter type
Room EQ
12-band fully parametric EQ
Bass Management Crossover
Variable
Speaker Output Delay
Up to 18 ms per output channel for speaker time-of-arrival offset)
A/V Synchronization Delay
Up to 150 ms (globally applied to all output channels except aux outputs)
Aux Out Delay
Up to 150 ms
Master Volume Control
-120 dB to 0 dB
Dim Control
User-adjustable, -120 dB to 0 dB
Height
88.9 mm
Depth
349.25 mm
Width
482.6 mm
Type
Universal switch-mode
Operating Voltage
100-240 VAC, 50/60 Hz
Power Consumption
85 Watts
Total Simultaneous Outputs
24 analog outputs and 24 simultaneous BLU link outputs
Connectors
3 female 25- pin D-Sub connectors
24 Balanced ANALOG OUTPUTS
Female XLR
Max Output Level
+24 dBu, balanced, ≤ .006% THD
Total Simultaneous Inputs
24 (selectable among the available 24 analog, 24 AES3, and 24 BLU link input channels)
ANALOG INPUTS Connectors
3 female 25- pin D-Sub connectors
Type
Electronically balanced, RF filtered
Impedance
> 48 kΩ balanced, > 24 kΩ unbalanced
Input Sensitivity
Selectable in software per D-Sub connector
Max Input Level
+28 dBu, ≤0.008% THD CMRR
24 AES3 DIGITAL INPUTS 8 Sample Rate Conversion
selectable in software 1 Calibration MIC / Talk back Mic INPUT
With Phantom Power
+48 VDC
China
-

Maximum monitor control

The JBL Intonato 24 Monitor Management Tuning System provides easy setup, automated calibration and comprehensive control of professional monitoring systems. Housed in a 2U rack-mount enclosure, Intonato 24 precisely calibrates and controls up to 24 speakers configured as stereo, surround or immersive audio systems. You can create and instantly recall customized routing of up to 24 analog, digital and networked audio sources. Included software and an optional Desktop Controller put the system’s powerful monitoring features at your fingertips. Intonato 24 delivers the benefits of a precisely calibrated system, and takes control room monitoring to the next level. Intonato, from the Latin verb Intonare meaning “tuned,” “matched,” “in tune,” describes a primary attribute of all speakers in the ideal control room monitoring environment. Compatible with all professional studio monitors.

Input connections for 24 analog, AES /EBU Inputs; up to 256 channels of networked audio in HARMAN BLU link or Dante format (with optional BLUDAN interface). Output connections include 24 analog outputs to powered speakers and power amplifiers; BLU link output allows networked connection to HARMAN Crown power amplifiers.
Precisely balances, tunes and aligns all speakers via the included microphone to deliver greater accuracy to the mix position in any room; 12 bands of Room EQ, Delay, Level per speaker
Allows standard and customized response curves such as X-Curve and compensation for perforated screen transmission loss
Allows compensation for video display latency
Allows an independent feed to be sent to talent or a remote “green room”
For quiet operation
Allows user-configurable down mixes and routings

Can’t find what you’re looking for?

Call us

Call us

To speak to our customer service specialist

1800-102-0525

Mon to Sun 10 AM to 7 PM IST

message

Message Us

Chat with a support agent via Whatsapp at:
91 70658 44446

Mon - Sun: 10:00 am - 7:00 pm (IST)