How To

Support Overview / How To

How To

1869 results
  • INVOKE: Final Software Update & Release Notes
    Harman Kardon Invoke
    Final Software Update release notes

    Release date:  September 8, 2021
    Software version12.2314.0
    Release mediaVia USB software flash tool as provided by Harman Customer Service
    What’s New:
    1. Fixed a pop noise sound when you play/pause the music.
    2. Fixed an issue where Bluetooth pairing is always available without pressing the Bluetooth button.
    3. Enable factory reset via the reset pinhole next to the microphone mute button. For example, use a paperclip, press and hold the button for 5 seconds to reset your Invoke speaker.
    4. Other minor bug fixes and improvements.


    There are two ways to perform this update.

    Option 1 (recommended): Do It Yourself Update
    Estimated Time: 15-20 minutes
    Cost: Free
    Download Link: Harman Kardon INVOKE Driver & OTA2 (220meg)

     
    1. Download the zip file from the link above.
    2. Unzip/Extract the entire contents of the zip file.
    3. Read through the instructions (OTA2.pdf) before performing the update to familiarize yourself with the procedure.
    4. Process 1: Install the driver in your Windows 10 computer so that it can recognize and communicate with your INVOKE.
      1. NOTE: This is not possible on computers that use BitLocker or other corporate encryption tools. Use a personal computer that does not use advanced encryption.
    5. Process 2: Install the update on your INVOKE via your Windows 10 computer.


    OPTION 2: Factory Update
    Estimated Time: 2-6 weeks
    Cost: Shipping charges from your location to City Of Industry, California
    Form Link: Sofware Update Request Form
     
    1. Click on the link above.
    2. Fill out the online form.
    3. Select INVOKE in the Product field.
    4. Type “Software Update Request” in the Description Of Issue/Problem field.
    5. Click Submit.
    6. Wait to receive an email within 48 hours with instructions for shipping back your unit.
    7. Please note that you are responsible for carefully packing your INVOKE and all shipping charges.
    8. Harman will update your product and send it back to you within 2-6 weeks.
  • Invoke FAQ
  • In your specification sheet for ESQUIRE2. It says that is has A2DP profile, which codec is supported?
    Our A2DP profile only support SBC Codec for ESQUIRE 2.
  • IP67 Information
    This product is rated IP67, which is different from IPX7. IP67 protects the product from submersion in 1 meter (3.3 feet) of water for up to 30 minutes. It is also resistant against dust. Dust accumulation around electronics can lead to hardware failure, so the IP67 rating is an extremely beneficial addition to this product. 
  • IP68 Information
    This unit is fully dust-proof, and can withstand continuous immersion in water (up to 1.5 meters / 4.9ft for 30 minutes). 
  • I received an email telling me that my Personalized order had been cancelled due to an image violation. Why did this happen?
    We use a sophisticated vetting process to ensure that your image does not contain copyrighted, protected, sexual, suggestive, offensive or inappropriate elements. This includes words and messages. If these algorithms are triggered, your order is automatically cancelled. Please try again with a different image or wording.
  • I received my InfinityLab power bank, but it could not be charged
    With different storage conditions and shipping durations, your power bank may go into deep sleep mode to protect the battery. If the power bank does not start charging your device when used for the first time, connect the power bank to a power source and charge it for 15-30 minutes, it should then work normally. If it still does not work, contact our customer service team and we will be happy to help you: https://support.infinitylab.com/#contact
  • Is an analog aux signal fed to the jack input available on the analog jack output?
    Yes, but only with power on the Adapt. When it senses a signal on the analog aux input, the input ring will light up green automatically, and the signal will become available from the line output, for transmission with cable to e.g. an amplifier. It is important to note that there will be a slight delay in the signal that comes out of the line output jack, even if it does not involve any wireless functions.
  • Is Bluetooth APT X streaming supported by the JBL Bar Studio, Bar 2.1, Bar 3.1, Bar 5.1 and Bar 9.1?
    The speaker uses Bluetooth version 4.2 but does NOT support APT X.
  • I see AURA as AirPlay device, but not as DLNA device, how come?
    If your device is capable of seeing AURA as an AirPlay unit, it will also be available as DLNA device, as AURA needs to be connected to your network for it to work as DLNA/AirPlay unit. Make sure your devices are on the same network.
  • I see that your new AURA supports Spotify Connect. Will my older AURA be elegible for upgrading to Spotify Connect?
    Current AURA customers will be able to upgrade your speaker to support Spotify Connect. Simply use the HK Remote app, as it will be OTA update. Otherwise, contact our helpdesk for help.
  • Is it ok to keep it plugged into a power source all the time?
    It will not damage the battery that power supply is connected all the time.
< 1 ... 89 90 91 92 93 ... 157 >

Can’t find what you’re looking for?

Call Us

Call Us

Talk to a product expert
Call Us now at: (877) 871-6755

Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)

Chat with Us

Chat with Us

Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)

message

Text Us

Text with a support agent via SMS at:
628-333-7807

Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)