How To

How To

1869 results
  • Yes, this can be done very easily by doing the following procedure: 1: Power on the Cinema Base. 2: Simultaneously press the “Surround” and “VOL –” buttons (at the same time). 3: The Cinema Base source LED button will light amber in color, for 1 second, then the power button LED light will go off and on. 4: Your Cinema Base is now reset.
  • Yes, by holding down Volume+ and surround button for more than 5 seconds will reset the SB20. The SB20 will automatically reboot itself, after it has been reset.
  • Yes, switch the soundbar ON, then press the volume - ( minus ) and surround buttons at the same time for 5 seconds. Now the device is reset.
  • The JBL Cinema SB450 can be reset to its default factory settings and erasing all programming. To reset the soundbar, press and hold Volume+ and Virtual Surround buttons for 5s.
  • There are 5 leds which indecates the current charge level, Each led indicates 20% of charge.
  • No, NC is always on when Bluetooth is on. However, it is possible to select NC on or off when listening via cable.
  • No. There is no way to turn off the blue LED light from our wireless headphones unless they are turned off.
  • Yes, Alexa has various voice commands to turn up the volume. Try saying "Alexa, turn it up" or "Alexa, set volume to 5".
  • While this is indeed possible, no such cable is made by AKG, so only cables from third-party manufacturers may be considered. Please note that internal pin configuration must be identical to the original cable for such a cable to work with the headphones.
  • No, this is not possible. Even though the MMCX (micro-miniature coaxial) connectors seem identical, they are not the same dimensions.
  • Yes, two headsets can be used simultaneously with one transmitter.
  • No, we only have support for MHL compatible devices, which Chromecast do not support.
  • Our BDS system does supports WPS PIN, please do the following:
    1. Select WPS PIN from the Setup Wi-Fi list. A PIN code is displayed on the screen.
    2. Enter this same PIN on your wireless router’s internal web page to connect. See your router’s user manual for more details.
  • No, it is not recommended to connect only one input on our Dual Tweeter models. These models are built using Dual Voice Coil woofers and driving only one half of the motor structure is not healthy for the speaker and will shorten its life expectancy.
  • For your personal safety and to avoid possible damage to your equipment and speakers, it is always a good practice to turn off and unplug the AVR and ALL source equipment from the AC output before making any audio or video system connections.
  • For your personal safety and to avoid possible damage to your equipment and speakers, it is always a good practice to turn off and unplug the AVR and ALL source equipment from the AC output before making any audio or video system connections.
  • No, the speaker needs to be connected to power before it can work.
  • No. Please don’t expose JBL Trip to rain or other liquids.
  • No, there is no leather on this model.
  • Yes, our AVR's have ARC (Audio Return Channel) on one of our HDMI ports (Labeled ARC). ARC will process both video and audio coming from your TV into the AVR and back, and if you have another source like BlueRay player in one of the other HDMI ports. It will transfer video and audio via the ARC port to your TV.
  • Your security comes first with everything Google does. If your data is not secure, it is not private. That is why Google services are protected by one of the world’s most advanced security infrastructures. Conversations within JBL LINK speakers are encrypted by default.
  • The OMNI BAR+ as standalone system is 2.1, however when using it in a 5.1 wireless surround system, it generates a virtual acoustic center speaker to complete the 5.1 Surround system. In that combination it will be a 3.1 system.
  • This model is not supported by the JBL Partybox App.
  • Actually the N5005 is very special, because it is BOTH wireless and wired, right out of the box! This is a result of its advanced design, where the cables can be removed from the speaker pods by clicking apart the MMCX connectors. The flexibility in this arrangement becomes very clear when you look at the cables that are in the box when you open it. First, there is the normal cable with 3.5 mm stereo jack and a three-button remote control. This cable is for normal sources, smartphones, tablet computers etc. There is a switch on the back of the remote that permits you to select Android/universal or iOS remote function, for total flexibility. Second, you get the Bluetooth cable, which has a battery box and a three-button remote on the cable. This cable simply converts your N5005 into a wireless headphone. AptX and AAC are supported, but not aptX HD or LL. BT transmission will not be capable of unlocking the full potential of the N5005 due to its nature as a lossy compression system, but it is nice to have this option. The cable has a chin slide lock that can secure the headphones under your chin. Playing time is up to 8 hours, and charging takes place in less than 2 hours. Third, as an indication of the high quality of audio that N5005 masters, you get a special, fully balanced cable without remote control. It uses the 4-pole 2.5 mm jack that you will find on the new generation of high-end headphone amplifiers and music players. With this connection and the proper source material and electronics, you can experience the pinnacle of music reproduction.
  • No. All of the Everest Elite headphones are designed to offer the key features and benefits to the user without the need for the app. The My JBL Headphones App gives the consumer another level of control over the headphones. Through the app, the consumer can personalize the performance of the headphones such as: varying levels of the ambient aware, creating custom eq settings, and turning features on or off.
  • No it is only available in black.
  • No, the case is NOT waterproof
  • No it is a premium material with leather look.
  • The case handle light rain and snow, but will not be waterproof if submerged into water.
  • Yes. The Clip 3 has an IPX 7 rating. You can take the speaker under water, down to 1 meter depth up to 30 minutes.
  • No, the operating system itself is not crucial, and no additional driver is necessary for Bluetooth connection of speaker and microphone.
  • No, only if the socket is closed.
  • No, only if the zipper is closed.
  • No. The Dual Wireless Sound featured in the Onyx Studio 5 only gives you the capability to connect to a second Onyx Studio 5. It is not possible to connect the Onyx Studio 3 and 5 together. The Onyx Studio 5 can only be connected to no more than one other Onyx Studio 5.
  • No. This is a wired headphone that features a one button microphone.
  • E55BT is an over-ear headphone.
  • No. This product is not water-proof. Over exposure to water can cause damage to the headphones and compromise the controls.
  • No. Although the Focus 500 can be exposed to some water and sweat, overexposure can cause significant damage to the headphones and can compromise the controls.
  • No, it is compatible with PC and Mac, but not with PS4, XBOX One, Nintendo Switch or Mobile.
  • It would depend where you buy it from. If you bought it in Germany, it will speak German from the start and if you bought it from USA or UK it will speak English. The langauge of the speaker can be changed in our HK Alexa setup app. Go to Settings, Device, Language and select your preferred language.
  • The IENC is not a wireless headphone. It is a wired headphone equipped with a 3.5 mm jack and a Noise Canceling box to control ambient aware sound.
  • No. Although the Inspire 500/700 can be exposed to some water and sweat, overexposure can cause significant damage to the headphones and can compromise the controls.
  • Yes. The Inspire 500/700 is an in-ear Sport Wireless Headphone.
  • No. The J88a headphone is a wired headphone and does not have bluetooth capabilities.
  • The JBL Duet BT is an on-ear headphone. It features a synthetic leather ear cup that sits comfortably on the ear.
  • Because the JBL DUET does not feature an IPX rating against sweat and water, we do not recommend that you perform rigorous athletic activity while using these headphones. If you are interested in sweat and water proof headphones, please visit our JBL SPORT headphone page on our website.
  • Yes, two flexible joints permit you to expand the collar to make it easier to place it around your neck.
  • Yes, the Lexicon DD8 is compatible with 4 ohm speakers.
  • No. The Live 200BT does not feature any IPX rating so overexposure to both sweat and water can compromise the headphones.
  • The N20U is not a wireless headphone. It features a fabric cord with your standard 3.5 mm jack.
  • No, N40 is not wireless. It has a cable with 3.5mm stereo jack. 3-pole jack on the straight cable, 4-pole jack on the remote cable. Airplane adapter is included. Cable length is 112cm excluding the jack and the ear loops.
  • No, the N90Q is not wireless. Signals must go through a cable, either analog 3.5mm jack or digital micro USB. Since this is a headphone of very high quality, able to process and play high-definition audio signals, wireless Bluetooth transmission with its inherently low resolution would not make sense.
  • The phono section is integral to the No. 526, it is not an option. It is a different (new) design from the one available for the No. 326S. Because every No526 has phono (and line and digital inputs) the No526’s internal phono section cannot be ordered separately.
  • With the release of v.3.0 of the JBL Music app, owners of the JBL Authentics L8 and L16 are now greeted with a message that an update is available. If you own one of these speaker systems, and you know that it already supports Spotify Connect, the update firmware is already installed, and you can ignore this message. If your speaker system does not already support Spotify Connect, the update is available for you, but you cannot perform it yourself, it must go to a service center to be updated. Please contact Harman Helpdesk or the distributor in your country for advice regarding servicing.
  • No, the app works with the ELITE models only. These are the ones that feature Active Noise Cancelling.
  • No, the headphones switch on and off with the Oculus Rift.
  • No, you can easily scroll through your library with ease.
  • No. It is the only available connection.
  • No, this cable is straight, with no remote control. The headphones have remote control buttons on the ear pods, which can be used when listening over Bluetooth wireless.
  • Yes, the cable has a one-button remote control and a microphone. This means that you can pause, resume play, you can pick up the phone and stop a call, and talk to other people through the microphone. There is no option to control music volume on the cable remote. That is only possible when using the Bluetooth system for wireless listening, with the volume buttons on the ear pod.
< 1 ... 18 19 20 21 22 ... 32 >

Can’t find what you’re looking for?

Call Us

Call Us

Talk to a product expert
Call Us now at: (877) 871-6755

Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)

Chat with Us

Chat with Us

Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)

message

Text Us

Text with a support agent via SMS at:
628-333-7807

Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)