How To
How To
1869 results
-
No. It is the only available connection.Was this helpful? Thank you for your feedback!
-
No, you can easily scroll through your library with ease.Was this helpful? Thank you for your feedback!
-
No, the headphones switch on and off with the Oculus Rift.Was this helpful? Thank you for your feedback!
-
No, the app works with the ELITE models only. These are the ones that feature Active Noise Cancelling.Was this helpful? Thank you for your feedback!
-
With the release of v.3.0 of the JBL Music app, owners of the JBL Authentics L8 and L16 are now greeted with a message that an update is available. If you own one of these speaker systems, and you know that it already supports Spotify Connect, the update firmware is already installed, and you can ignore this message. If your speaker system does not already support Spotify Connect, the update is available for you, but you cannot perform it yourself, it must go to a service center to be updated. Please contact Harman Helpdesk or the distributor in your country for advice regarding servicing.Was this helpful? Thank you for your feedback!
-
The phono section is integral to the No. 526, it is not an option. It is a different (new) design from the one available for the No. 326S. Because every No526 has phono (and line and digital inputs) the No526’s internal phono section cannot be ordered separately.Was this helpful? Thank you for your feedback!
-
No, the N90Q is not wireless. Signals must go through a cable, either analog 3.5mm jack or digital micro USB. Since this is a headphone of very high quality, able to process and play high-definition audio signals, wireless Bluetooth transmission with its inherently low resolution would not make sense.Was this helpful? Thank you for your feedback!
-
No, N40 is not wireless. It has a cable with 3.5mm stereo jack. 3-pole jack on the straight cable, 4-pole jack on the remote cable. Airplane adapter is included. Cable length is 112cm excluding the jack and the ear loops.Was this helpful? Thank you for your feedback!
-
The N20U is not a wireless headphone. It features a fabric cord with your standard 3.5 mm jack.Was this helpful? Thank you for your feedback!
-
No. The Live 200BT does not feature any IPX rating so overexposure to both sweat and water can compromise the headphones.Was this helpful? Thank you for your feedback!
-
Yes, the Lexicon DD8 is compatible with 4 ohm speakers.Was this helpful? Thank you for your feedback!
-
Yes, two flexible joints permit you to expand the collar to make it easier to place it around your neck.Was this helpful? Thank you for your feedback!
-
Because the JBL DUET does not feature an IPX rating against sweat and water, we do not recommend that you perform rigorous athletic activity while using these headphones. If you are interested in sweat and water proof headphones, please visit our JBL SPORT headphone page on our website.Was this helpful? Thank you for your feedback!
-
The JBL Duet BT is an on-ear headphone. It features a synthetic leather ear cup that sits comfortably on the ear.Was this helpful? Thank you for your feedback!
-
No. The J88a headphone is a wired headphone and does not have bluetooth capabilities.Was this helpful? Thank you for your feedback!
-
Yes. The Inspire 500/700 is an in-ear Sport Wireless Headphone.Was this helpful? Thank you for your feedback!
-
No. Although the Inspire 500/700 can be exposed to some water and sweat, overexposure can cause significant damage to the headphones and can compromise the controls.Was this helpful? Thank you for your feedback!
-
The IENC is not a wireless headphone. It is a wired headphone equipped with a 3.5 mm jack and a Noise Canceling box to control ambient aware sound.Was this helpful? Thank you for your feedback!
-
It would depend where you buy it from. If you bought it in Germany, it will speak German from the start and if you bought it from USA or UK it will speak English. The langauge of the speaker can be changed in our HK Alexa setup app. Go to Settings, Device, Language and select your preferred language.Was this helpful? Thank you for your feedback!
-
No, it is compatible with PC and Mac, but not with PS4, XBOX One, Nintendo Switch or Mobile.Was this helpful? Thank you for your feedback!
-
No. Although the Focus 500 can be exposed to some water and sweat, overexposure can cause significant damage to the headphones and can compromise the controls.Was this helpful? Thank you for your feedback!
-
No. This product is not water-proof. Over exposure to water can cause damage to the headphones and compromise the controls.Was this helpful? Thank you for your feedback!
-
E55BT is an over-ear headphone.Was this helpful? Thank you for your feedback!
-
No. This is a wired headphone that features a one button microphone.Was this helpful? Thank you for your feedback!
-
No. The Dual Wireless Sound featured in the Onyx Studio 5 only gives you the capability to connect to a second Onyx Studio 5. It is not possible to connect the Onyx Studio 3 and 5 together. The Onyx Studio 5 can only be connected to no more than one other Onyx Studio 5.Was this helpful? Thank you for your feedback!
-
No, only if the zipper is closed.Was this helpful? Thank you for your feedback!
-
No, only if the socket is closed.Was this helpful? Thank you for your feedback!
-
No, the operating system itself is not crucial, and no additional driver is necessary for Bluetooth connection of speaker and microphone.Was this helpful? Thank you for your feedback!
-
Yes. The Clip 3 has an IPX 7 rating. You can take the speaker under water, down to 1 meter depth up to 30 minutes.Was this helpful? Thank you for your feedback!
-
The case handle light rain and snow, but will not be waterproof if submerged into water.Was this helpful? Thank you for your feedback!
-
No it is a premium material with leather look.Was this helpful? Thank you for your feedback!
-
No, the case is NOT waterproofWas this helpful? Thank you for your feedback!
-
No it is only available in black.Was this helpful? Thank you for your feedback!
-
No. All of the Everest Elite headphones are designed to offer the key features and benefits to the user without the need for the app. The My JBL Headphones App gives the consumer another level of control over the headphones. Through the app, the consumer can personalize the performance of the headphones such as: varying levels of the ambient aware, creating custom eq settings, and turning features on or off.Was this helpful? Thank you for your feedback!
-
Actually the N5005 is very special, because it is BOTH wireless and wired, right out of the box! This is a result of its advanced design, where the cables can be removed from the speaker pods by clicking apart the MMCX connectors. The flexibility in this arrangement becomes very clear when you look at the cables that are in the box when you open it. First, there is the normal cable with 3.5 mm stereo jack and a three-button remote control. This cable is for normal sources, smartphones, tablet computers etc. There is a switch on the back of the remote that permits you to select Android/universal or iOS remote function, for total flexibility. Second, you get the Bluetooth cable, which has a battery box and a three-button remote on the cable. This cable simply converts your N5005 into a wireless headphone. AptX and AAC are supported, but not aptX HD or LL. BT transmission will not be capable of unlocking the full potential of the N5005 due to its nature as a lossy compression system, but it is nice to have this option. The cable has a chin slide lock that can secure the headphones under your chin. Playing time is up to 8 hours, and charging takes place in less than 2 hours. Third, as an indication of the high quality of audio that N5005 masters, you get a special, fully balanced cable without remote control. It uses the 4-pole 2.5 mm jack that you will find on the new generation of high-end headphone amplifiers and music players. With this connection and the proper source material and electronics, you can experience the pinnacle of music reproduction.Was this helpful? Thank you for your feedback!
-
This model is not supported by the JBL Partybox App.Was this helpful? Thank you for your feedback!
-
The OMNI BAR+ as standalone system is 2.1, however when using it in a 5.1 wireless surround system, it generates a virtual acoustic center speaker to complete the 5.1 Surround system. In that combination it will be a 3.1 system.Was this helpful? Thank you for your feedback!
-
Your security comes first with everything Google does. If your data is not secure, it is not private. That is why Google services are protected by one of the world’s most advanced security infrastructures. Conversations within JBL LINK speakers are encrypted by default.Was this helpful? Thank you for your feedback!
-
Yes, our AVR's have ARC (Audio Return Channel) on one of our HDMI ports (Labeled ARC). ARC will process both video and audio coming from your TV into the AVR and back, and if you have another source like BlueRay player in one of the other HDMI ports. It will transfer video and audio via the ARC port to your TV.Was this helpful? Thank you for your feedback!
-
No, there is no leather on this model.Was this helpful? Thank you for your feedback!
-
No. Please don’t expose JBL Trip to rain or other liquids.Was this helpful? Thank you for your feedback!
-
No, the speaker needs to be connected to power before it can work.Was this helpful? Thank you for your feedback!
-
For your personal safety and to avoid possible damage to your equipment and speakers, it is always a good practice to turn off and unplug the AVR and ALL source equipment from the AC output before making any audio or video system connections.Was this helpful? Thank you for your feedback!
-
For your personal safety and to avoid possible damage to your equipment and speakers, it is always a good practice to turn off and unplug the AVR and ALL source equipment from the AC output before making any audio or video system connections.Was this helpful? Thank you for your feedback!
-
No, it is not recommended to connect only one input on our Dual Tweeter models. These models are built using Dual Voice Coil woofers and driving only one half of the motor structure is not healthy for the speaker and will shorten its life expectancy.Was this helpful? Thank you for your feedback!
-
Our BDS system does supports WPS PIN, please do the following:
- Select WPS PIN from the Setup Wi-Fi list. A PIN code is displayed on the screen.
- Enter this same PIN on your wireless router’s internal web page to connect. See your router’s user manual for more details.
Was this helpful? Thank you for your feedback! -
No, we only have support for MHL compatible devices, which Chromecast do not support.Was this helpful? Thank you for your feedback!
-
Yes, two headsets can be used simultaneously with one transmitter.Was this helpful? Thank you for your feedback!
-
No, this is not possible. Even though the MMCX (micro-miniature coaxial) connectors seem identical, they are not the same dimensions.Was this helpful? Thank you for your feedback!
-
While this is indeed possible, no such cable is made by AKG, so only cables from third-party manufacturers may be considered. Please note that internal pin configuration must be identical to the original cable for such a cable to work with the headphones.Was this helpful? Thank you for your feedback!
-
Yes, Alexa has various voice commands to turn up the volume. Try saying "Alexa, turn it up" or "Alexa, set volume to 5".Was this helpful? Thank you for your feedback!
-
No. There is no way to turn off the blue LED light from our wireless headphones unless they are turned off.Was this helpful? Thank you for your feedback!
-
No, NC is always on when Bluetooth is on. However, it is possible to select NC on or off when listening via cable.Was this helpful? Thank you for your feedback!
-
There are 5 leds which indecates the current charge level, Each led indicates 20% of charge.Was this helpful? Thank you for your feedback!
-
The JBL Cinema SB450 can be reset to its default factory settings and erasing all programming. To reset the soundbar, press and hold Volume+ and Virtual Surround buttons for 5s.Was this helpful? Thank you for your feedback!
-
Yes, switch the soundbar ON, then press the volume - ( minus ) and surround buttons at the same time for 5 seconds. Now the device is reset.Was this helpful? Thank you for your feedback!
-
Yes, by holding down Volume+ and surround button for more than 5 seconds will reset the SB20. The SB20 will automatically reboot itself, after it has been reset.Was this helpful? Thank you for your feedback!
-
Yes, this can be done very easily by doing the following procedure: 1: Power on the Cinema Base. 2: Simultaneously press the “Surround” and “VOL –” buttons (at the same time). 3: The Cinema Base source LED button will light amber in color, for 1 second, then the power button LED light will go off and on. 4: Your Cinema Base is now reset.Was this helpful? Thank you for your feedback!
-
Yes, press Volume + and Surround button at the same time for 5 seconds.Was this helpful? Thank you for your feedback!
-
Yes, they are quite easy to remove, and with a little care, new ear pads can be fitted in one or two minutes. You can do this yourself.Was this helpful? Thank you for your feedback!
Can’t find what you’re looking for?
Call Us
Talk to a product expert
Call Us now at:
(877) 871-6755
Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)
Chat with Us
Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)