Harman Kardon Onyx Studio 4
Portable Bluetooth Speaker
Getting started with your Harman Kardon Onyx Studio 4
Quick Start Guide
Get up and running in no time with our easy-to-follow Quick Start Guide
Register your product
Do you own this product? Register it here! And claim your warranty or service easily
Register nowDocuments & Downloads
Product Specifications
- Support
- A2DP 1.3, AVRCP 1.6, HFP 1.6
- Transducers
- Woofer 2 x 75mm, Tweeter 2 x 20mm
- Rated Power
- 4 x 15W (AC mode); 4 x 7.5W (Battery mode)
- Frequency response
- 50Hz - 20kHz (-6dB)
- Signal to noise ratio
- 80dB A-weighted
- Weight: 2061g
- Dimension (H x W x D): 260mm x 278mm x 159.5mm
- Bluetooth version: 4.2
- Bluetooth transmitter power
- 0 - 9dBm
- Bluetooth transmitter frequency range
- 2402MHz - 2480MHz
- Bluetooth transmitter modulation
- GFSK, π/4 DQPSK, 8DPSK
- Power supply
- 19V/2A
- Battery type
- 3.7V/3000mAh Lithium-ion
- Battery charge time
- 5 hours
- Music playtime
- up to 8 hours (Varies by volume level and music content)
Elegant design full of features and superior sound
Providing the perfect balance of great sound, iconic design, and premium materials, the Onyx Studio 4 is the epitome of room-filling audio. Crafted to be the best sounding, full featured, portable Bluetooth speaker in its class, the Onyx Studio 4 offers two device connections, up to 8 hours of playtime and Harman Kardon Connect+, which allows you to connect 100+ speakers with the same feature with the touch of a button. Rounding out the Onyx Studio 4 offerings is a built-in microphone with Voicelogic, echo and noise cancellation for crystal-clear conferencing over the speaker.
Stream music wirelessly via Bluetooth to enjoy room-filling sound. Connect up to 2 smart devices at the same time and take turns playing music.
The rechargeable battery supports up to 8 hours of playtime
Amplify your listening experience by wirelessly connecting more than 100 HK Connect+ enabled speakers.
Noise and echo cancellation enables crystal-clear conferencing.
Access Siri or Google Now from the speaker with a simple button press. This can be easily configured via the HK Connect App.
The superior fabric and finishing combines with iconic design to compliment any style.
FAQs & How-Tos
7 results
-
If the buttons on your portable speaker are not working properly or are unresponsive while plugged into a power source, please try running the speaker on battery. If the buttons perform correctly while running on battery, this means your power supply is not providing enough current/amps. Be sure to use a power supply that has a rating equal to or greater than the amperage rating indicated in your product specs.Was this helpful? Thank you for your feedback!
-
Yes, you can take can incoming call from the Onyx 4 by pressing the call button located between the power button and volume + button.Was this helpful? Thank you for your feedback!
-
Bluetooth keeps on playing, even if you connect something and play to the AUX input. BT keeps on playing, since it has first priority. If you pause or stop BT play, any source playing to the AUX input will now be heard. If you resume play on the BT source, it will take over, and the AUX source is no longer heard, but will of course keep on playing, since there is no way to send a pause or stop signal to the AUX source via the line cable. All of this means that there is an input selector switch built into the device, controlled by the BT play function.Was this helpful? Thank you for your feedback!
-
Make sure that the unit you are attempting to connect to is in pairing mode under Bluetooth Settings. Press the power button located on far right outer rim of the speaker. If this is the first time connecting the unit, it will immediately go into pairing mode. HK Onyx 4 Studio should show up on your discoverable devices within 3-5 seconds. Once you choose the HK Onyx Studio 4 on your device, you will be connected and ready to experience that superior Harman Kardon sound.Was this helpful? Thank you for your feedback!
-
Download the HK Connect app to your mobile device. Make sure that the Onyx Studio 4 speaker is connected successfully to your mobile device. The HK Connect app should recognize the Onyx Studio 4 within the first few seconds. Once inside the app you can activate the voice assistant and connect to other Connect+ Harman Kardon devices.Was this helpful? Thank you for your feedback!
-
Press and hold the Phone and VOL + button simultaneously.
After 5 seconds, the unit powers Off, and is now reset.Was this helpful? Thank you for your feedback! -
JBL Connect+ can wirelessly link more than 100 JBL Connect+ enabled speakers together to amplify the partyWas this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Call Us
Talk to a product expert
Call Us now at:
(877) 871-6755
Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)
Chat with Us
Mon - Fri: 9:00 am - 11:00 pm (ET)
Sat - Sun: 9:00 am - 5:00 pm (ET)
