JBL Tune Beam 2
Totalt trådløse øretelefoner med støjreduktion, JBL Spatial Sound og Smart Ambient-teknologi
Getting started with your JBL Tune Beam 2
Documents & Downloads
Specifications
- Enhedsstørrelse
- dynamisk enhed på 10 mm
- Øretelefonernes modstandsfaktor
- IP54
- Strømforsyning
- 5V 1A
- Frekvensområde
- 20 Hz-20 kHz
- Maksimal driftstemperatur
- 45 grader (C)
- Impedans
- 16 ohm
- Følsomhed
- 100 dB SPL ved 1 kHz
- Maksimal SPL
- 95 dB
- Mikrofonfølsomhed
- -38 dBV/Pa ved 1 kHz
- Øretelefon
- 5,2 g per stk. (10,4 g i alt)
- Ladeetui
- 42 g
- Øretelefonens mål (l x b x d)
- 33,4 x 22,6 x 25 mm
- Mål for ladeetuiet (l x b x d)
- 61,5 x 29,15 x 47 mm
- Bluetooth-version
- 5.3
- Bluetooth-profilversion
- A2DP V1,4, AVRCP V1.6.2, HFP V1.8
- Frekvensområde for Bluetooth-sender
- 2,4-2,4835 GHz
- Bluetooth-effekt for sender
- ≤13 dBm (EIRP)
- Bluetooth-sendermodulering
- GFSK, π/4-DQPSK, 8DPSK
- Batteritype til øretelefoner
- Litium-ion-batteri (65 mAh / 3,85 V )
- Batteritype til ladeetui
- Litium-ion-batteri (590 mAh / 3,8 V)
- Ladetid
- 2 timer fra tomt batteri
- Musikspilletid med Bluetooth slået til og aktiv støjreduktion slået fra
- Op til 12 timer
- Musikspilletid med Bluetooth og aktiv støjreduktion slået til
- Op til 10 timer
- Taletid med aktiv støjreduktion slået fra
- Op til 6 timer
- Taletid med aktiv støjreduktion slået til
- Op til 5 timer
Ren bas, nul støj
Kom gennem din dag, én sang ad gangen, med de totalt trådløse JBL Tune Beam 2-øretelefoner med adaptiv støjreduktion. De leverer op til 48 timers enestående JBL Pure Bass-lyd og JBL Spatial Sound, mens det ergonomiske (og vand- og støvafvisende) design giver dig komfort hele dagen i al slags vejr. Nyd opkald i perfekt lydkvalitet uden støj fra omgivelserne, alt sammen med intuitiv touch-betjening. Med adaptiv støjreduktion og Smart Ambient-teknologi kan du lukke verden ude eller vælge, hvor meget du vil engagere dig i dine omgivelser. Du kan endda gøre din lydoplevelse personlig med JBL Headphones-appen og skræddersy lyden omkring dig med Personi-Fi 3.0. Tag JBL Tune Beam 2 på, og oplev din verden på din måde.
FAQs & How-Tos
-
Yes, the headphones have Multipoint Connection, which allows you to switch seamlessly between the connected devices.Was this helpful? Thank you for your feedback!
-
It is not uncommon to have charging problems with True Wireless headphones. You may encounter that charging stops, does not start at all or that one of the ear buds suddenly switches on and begins the pairing process. This is almost always caused by dirt on the metal charging contacts. These contacts are vulnerable because they can easily be contaminated by sweat, skin grease, or ear wax. They are usually gold plated, but gold plating does not prevent surface dirt.
If you have charging problems, the first step is to always clean all contact points, on each earbud and on the charging case.
You will need: cotton cloth or makeup swab, cotton swabs and rubbing alcohol. Also a pencil with eraser for further cleaning.
Use a cotton swab with some rubbing alcohol to clean the charging terminals of the headphones. Rotate the swab and scrub lightly on each contact surface, then use a cotton cloth to remove any dust and cotton residue left on the headphones. It is important to perform this process periodically to keep your headphones clean, thus avoiding affecting the charging speed/quality.
Wipe the contact pins in the charging case with a clean cotton swab. The swab can be slightly moistened with rubbing alcohol, but it is important that the interior is completely dry before closing the box. Use the cotton cloth and wait for it to dry.
Repeat until the contact points are visibly clean, and charging should work as designed.
Try cleaning the contacts with the tip of a pencil and the eraser at the end of the pencil, the graphite and rubber can help to re-establish charging also.
This procedure can be performed on all True Wireless Stereo earphones and cases.Was this helpful? Thank you for your feedback! -
Double-tap the button on the right earbud, then on the third tap - press and hold the button for more than 5 seconds (until the unit shuts off).
This restores the earbuds to the factory defaults.
TWS must be connected to perform the reset, so neither of the earbuds should be off or in the charging case.
It also may be necessary to remove or forget the earbuds from the list of paired Bluetooth devices in order to pair again.Was this helpful? Thank you for your feedback! -
This headphone is supported by the My JBL Headphones App.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Call us
Call us now at:
+45 32712498
Monday - Friday: 09.00-17.00
Chat with us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00