JBL Live Buds 3
Totalt trådløse, støjreducerende øretelefoner af øreprop-typen med Smart Charging Case™
Getting started with your JBL Live Buds 3
Documents & Downloads
Specifications
- Enhedsstørrelse
- dynamisk enhed på 10 mm/0,39"
- Maksimal driftstemperatur
- 45 °C
- Strømforsyning
- 5V 1A
- Frekvensområde
- 20 Hz - 40 kHz
- Impedans
- 16 ohm
- Følsomhed
- 103 dB SPL ved 1 kHz
- Maksimal SPL
- 97 dB
- Mikrofonfølsomhed
- -38 dBV/Pa ved 1 kHz
- Ørestykke
- 4,6 g per styk (9,2 g i alt)
- Opladningsetui
- 73 g
- Øretelefonens mål
- 21,8 x 15,9 x 21,2 mm
- Opladningsetuiets mål
- 61 x 51 x 30,8 mm
- Bluetooth-version (øretelefon)
- 5.3
- Bluetooth-version (opladningsetui)
- 5.1
- Bluetooth-profilversion
- A2DP V1,4, AVRCP V1.6.2, HFP V1.8
- Frekvensområde for Bluetooth-sender
- 2,4 GHz – 2,4835 GHz
- Bluetooth-sendereffekt (øretelefon)
- <10 dBm (EIRP)
- Bluetooth-sendereffekt (opladningsetui)
- <7 dBm (EIRP)
- Bluetooth-sendermodulering (øretelefon)
- GFSK, π/4-DQPSK, 8DPSK
- Bluetooth-sendermodulering (opladningsetui)
- GFSK
- Batteritype til øretelefoner
- Litium-ion-batteri (60 mAh / 3,85 V )
- Batteritype til ladeetui
- Litium-ion-batteri (620 mAh/ 3,8 V)
- Ladetid
- 2 timer fra tomt batteri
- Musikspilletid med Bluetooth slået til og aktiv støjreduktion slået fra
- Op til 10 timer
- Musikspilletid med Bluetooth og aktiv støjreduktion slået til
- Op til 8 timer
- Musikspilletid med Bluetooth og ægte adaptiv støjreduktion slået til
- Op til 7 timer
- Taletid med aktiv støjreduktion slået fra
- Op til 5,5 timer
- Taletid med aktiv støjreduktion slået til
- Op til 4,5 timer
Få din dag til at lyde fantastisk
Få tilpasset lyd uden overhovedet at se på din telefon. Brug knapperne på Smart Charging Case™ til JBL Live Buds 3, de totalt trådløse og støjreducerende øretelefoner med HD-lyd, til at justere alle funktioner uden at åbne JBL-appen på din enhed. Juster lydstyrke og EQ, styr din musik, besvar opkald, se beskeder – du kan endda tilpasse pauseskærmen med dine yndlingsbilleder. Og det er før, du får lov til at nyde den monumentale JBL Signature Sound fra Live Buds 3-øretelefonerne. Den bedste ægte adaptive støjreduktion i klassen fjerner forstyrrelser. JBL Spatial Sound gør film og musik virkelig medrivende. Når du skal besvare et opkald, sikrer 6 mikrofoner perfekt lydkvalitet i selv de mest støjende omgivelser. Du får alt dette plus 40 timers opladning: 10 timer i ørepropperne* og yderligere 30 i etuiet – og de kan oplades trådløst. Opladningsetuiet har en løkke til fastgørelse af en snor, så det bliver endnu mere praktisk. God lyd har aldrig været nemmere. (*med ANC slået fra)
FAQs & How-Tos
-
Yes, the headphones have Multipoint Connection, which allows you to switch seamlessly between the connected devices.Was this helpful? Thank you for your feedback!
-
It is not uncommon to have charging problems with True Wireless headphones. You may encounter that charging stops, does not start at all or that one of the ear buds suddenly switches on and begins the pairing process. This is almost always caused by dirt on the metal charging contacts. These contacts are vulnerable because they can easily be contaminated by sweat, skin grease, or ear wax. They are usually gold plated, but gold plating does not prevent surface dirt.
If you have charging problems, the first step is to always clean all contact points, on each earbud and on the charging case.
You will need: cotton cloth or makeup swab, cotton swabs and rubbing alcohol. Also a pencil with eraser for further cleaning.
Use a cotton swab with some rubbing alcohol to clean the charging terminals of the headphones. Rotate the swab and scrub lightly on each contact surface, then use a cotton cloth to remove any dust and cotton residue left on the headphones. It is important to perform this process periodically to keep your headphones clean, thus avoiding affecting the charging speed/quality.
Wipe the contact pins in the charging case with a clean cotton swab. The swab can be slightly moistened with rubbing alcohol, but it is important that the interior is completely dry before closing the box. Use the cotton cloth and wait for it to dry.
Repeat until the contact points are visibly clean, and charging should work as designed.
Try cleaning the contacts with the tip of a pencil and the eraser at the end of the pencil, the graphite and rubber can help to re-establish charging also.
This procedure can be performed on all True Wireless Stereo earphones and cases.Was this helpful? Thank you for your feedback! -
The JBL product is in a deep sleep mode, which it is to prolong the lifetime of the battery. Connect the case to a charger for about 2 seconds to wake the product up and take the earbuds out from the case. Once you put the earbuds back in the case, it's ready to pair through Bluetooth.
Was this helpful? Thank you for your feedback! -
Double-tap the button on the right earbud, then on the third tap - press and hold the button for more than 5 seconds (until the unit shuts off).
This restores the earbuds to the factory defaults.
TWS must be connected to perform the reset, so neither of the earbuds should be off or in the charging case.
It also may be necessary to remove or forget the earbuds from the list of paired Bluetooth devices in order to pair again.Was this helpful? Thank you for your feedback! -
This headphone is supported by the My JBL Headphones App.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Call us
Call us now at:
+45 32712498
Monday - Friday: 09.00-17.00
Chat with us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00