JBL Tune Buds
Totalt trådløse øretelefoner med støjreduktion
Sold from 2023 until now
Getting started with your JBL Tune Buds
Documents & Downloads
Specifications
- Enheds-størrelser (mm)
- 10
- Number of Microphones
- 4
- Enheds-følsomhed ved 1kHz/1mW (dB)
- 101
- Dynamisk frekvensområde (Hz)
- 20 Hz – 20 kHz
- Impedans (ohm)
- 32
- Vægt (g)
- 38.8
- Charging Case Weight (oz)
- 1.4
- Vægt (g)
- 10.8
- Earpiece Weight (oz)
- 0.3
- Bluetooth-profiler
- A2DP v1.3.2, AVRCP v1.6.2, HFP v1.8, DID v1.3
- Bluetooth-frekvens
- 2.4 GHz – 2.4835 GHz
- Bluetooth sender-modulation
- GFSK, π/4-DQPSK, 8-DPSK
- Bluetooth sender-effekt
- <13 dBm
- Bluetooth-version
- 5.3
- Charging case battery life (max hours)
- 30
- Ladetid (timer fra helt afladet)
- 2
- Maksimal spilletid uden aktiv støjreduktion (timer)
- 12
- Maksimal spilletid med aktiv støjreduktion (timer)
- 10
- Maksimal spilletid (timer)
- 48
- Taletid (timer)
- 6.6
- Bluetooth
- Ja
- Charging cable
- Ja
- Multi-point Connection
- Ja
- Stemmeassistent
- Ja
- Aktiv støjreduktion
- Ja
- Lader lyd fra omgivelserne passere
- Ja
- Indbygget mikrofon
- Ja
- Smart opladningsetui
- Ja
- Håndfri opkald
- Ja
- JBL Pure Bass-lyd
- Ja
- Flerpunktsforbindelse
- Ja
- Genopladeligt batteri
- Ja
- Lynopladning (5 min. = 1 t spilletid)
- Ja
- Multifunktionel TalkThru-knap
- Ja
- Touch-knapper
- Ja
- Ægte trådløse
- Ja
- Water Resistant
- Ja
- Trådløse
- Ja
- IPX-rating
- IP54
- Dustproof
- Ja
Ren bas. Ingen støj.
Klar dagen én sang ad gangen med JBL Tune Buds. Disse totalt trådløse øretelefoner giver dig op til 48 timers enestående JBL Pure Bass-lyd, mens det ergonomiske og vand- og støvafvisende design sikrer fuld komfort dagen lang i al slags vejr. Med et enkelt tryk kan du håndtere og nyde perfekte opkald overalt, uden støj fra omgivelserne. Og med aktiv støjreduktion og Smart Ambient-teknologi vælger du selv, om du vil lukke verden ude eller engagere dig i dine omgivelser. Øretelefonernes design sikrer perfekt isolering mod udefrakommende støj og en sikker pasform. Det bedste af det hele er, at JBL Headphones-appen giver dig mulighed for at gøre hele din lytteoplevelse personlig. Hold forbindelsen til din verden, på din måde.
FAQs & How-Tos
-
Yes, the headphones have Multipoint Connection, which allows you to switch seamlessly between the connected devices.Was this helpful? Thank you for your feedback!
-
It is not uncommon to have charging problems with True Wireless headphones. You may encounter that charging stops, does not start at all or that one of the ear buds suddenly switches on and begins the pairing process. This is almost always caused by dirt on the metal charging contacts. These contacts are vulnerable because they can easily be contaminated by sweat, skin grease, or ear wax. They are usually gold plated, but gold plating does not prevent surface dirt.
If you have charging problems, the first step is to always clean all contact points, on each earbud and on the charging case.
You will need: cotton cloth or makeup swab, cotton swabs and rubbing alcohol. Also a pencil with eraser for further cleaning.
Use a cotton swab with some rubbing alcohol to clean the charging terminals of the headphones. Rotate the swab and scrub lightly on each contact surface, then use a cotton cloth to remove any dust and cotton residue left on the headphones. It is important to perform this process periodically to keep your headphones clean, thus avoiding affecting the charging speed/quality.
Wipe the contact pins in the charging case with a clean cotton swab. The swab can be slightly moistened with rubbing alcohol, but it is important that the interior is completely dry before closing the box. Use the cotton cloth and wait for it to dry.
Repeat until the contact points are visibly clean, and charging should work as designed.
Try cleaning the contacts with the tip of a pencil and the eraser at the end of the pencil, the graphite and rubber can help to re-establish charging also.
This procedure can be performed on all True Wireless Stereo earphones and cases.Was this helpful? Thank you for your feedback! -
• Always have clear line of sight between your Bluetooth device (speaker, headphones etc.) and source device (Smartphone/tablet/PC etc). Be aware of obstacles in front of your devices.
• Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.
• Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.
• Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.
• Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.
• Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.Was this helpful? Thank you for your feedback! -
Double-tap the button on the right earbud, then on the third tap - press and hold the button for more than 5 seconds (until the unit shuts off).
This restores the earbuds to the factory defaults.
TWS must be connected to perform the reset, so neither of the earbuds should be off or in the charging case.
It also may be necessary to remove or forget the earbuds from the list of paired Bluetooth devices in order to pair again.Was this helpful? Thank you for your feedback! -
This headphone is supported by the My JBL Headphones App.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Call us
Call us now at:
+45 32712498
Monday - Friday: 09.00-17.00
Chat with us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00