JBL Quantum 400

JBL Quantum 400

USB over-ear-gaming-headset til PC med spil/chat-indstillingshjul

Sold from 2020 until now

Getting started with your JBL Quantum 400

Getting started with your JBL Quantum 400

Quick Start Guide

Get up and running in no time with our easy-to-follow Quick Start Guide

Product Registration

Register your product

Do you own this product? Register it here! And claim your warranty or service easily

Register now

Documents & Downloads

Specifications

Enheds-størrelser (mm)
50
Enheds-følsomhed ved 1kHz/1mW (dB)
98
Dynamisk frekvensområde (Hz)
20 Hz - 20 kHz
Impedans (ohm)
32
Passiv frekvensområde
20 Hz – 20 kHz
Audio Cable Length (ft)
3.9
Audio Cable Length (m)
1.2
Dybde (cm)
2.7
Ear Cup Depth (in)
1.1
Højde (cm)
9.9
Ear Cup External Height (in)
3.9
Bredde (cm)
8.8
Ear Cup External Width (in)
3.5
Indre bredde (cm)
5.8
Ear Cup Internal Height (in)
2.3
Indre højde (cm)
4.9
Ear Cup Internal Width (in)
1.9
Hovedtelefonernes kabel-længde (m)
3
Headphone Cable Length (ft)
9.8
Vægt (g)
274
Vægt (oz)
9.7
3,5 mm lydindgang
Ja
Audio cable
Ja
Indbygget mikrofon
Ja
Over-ear
Ja
Udskiftelige ørepuder
Ja

Sound is Survival

Få en lydfordel. JBL Quantum 400-headset holder dig et skridt foran med surround sound, der engagerer dig i spillet og giver dig mulighed for at forudse alle bevægelser. JBL QuantumSOUND Signature er designet til præcision og fordybelse og hjælper dig med at forbedre din performance, så du får en reel fordel i kampen. JBL Quantum 400 har også en boom-mikrofon med stemmefokus til klare multiplayer-interaktioner, et spil/chat-indstillingshjul, der er DISCORD-certificeret, og er kompatibelt med TeamSpeak med mere. En let og komfortabel hovedbøjle med ørepuder i memory-skum giver dig mulighed for at spille i timevis. Bliv bedre til dit spil med JBL Quantum 400-headset, og dominer dine modstandere.

Nyd spillets mest fornemme lydoplevelse med personlig surround sound, som er drevet af den medfølgende JBL QuantumENGINE pc-software. JBL QuantumSURROUND™ sætter dig i centrum af den mest engagerende oplevelse, så du kan blive bedre til spillet og sejre over konkurrenterne. Også udstyret med DTS-hovedtelefon:X v2.0.
Fra de mindste fodtrin til de mest larmende eksplosioner: JBL QuantumSOUND Signature gør alle scener episke – og alle gamere mere opsatte på at konkurrere. Vores signaturlyd leverer det mest realistiske lydbillede til en konkurrencefordel i enhver kamp.
Den lette hovedbøjle og ørepuder i memory-skum er designet til selv de længste gaming-sessioner.
JBL Quantum 400-headsettet giver dig mulighed for at samle tropperne og modstanderne med klarhed. Den retningsbestemte flip-up boom-mikrofon med stemmefokus har automatisk tænd/sluk og flere mute-muligheder.
JBL Quantum 400 headset har et spil/chat-indstillingshjul certificeret af DISCORD. Også kompatibelt med TeamSpeak og andre kommunikationsplatforme.
JBL Quantum 400-headsettet er kompatibelt via USB med PC, PS og Mac. 3,5 mm jackstik med PC, PlayStation™, Xbox™, Nintendo Switch™, mobilenheder, Mac og VR. De funktioner, der er drevet af JBL QuantumENGINE (JBL QuantumSURROUND, RGB, EQ, mikrofonindstillinger osv.), er kun tilgængelige på PC. Tjek tilslutningsvejledningen for kompatibilitet. *Kompatibel med PlayStation (PS5 og PS4) **Kompatibel med Xbox (Xbox-serie X S og One)
JBLs unikke QuantumENGINE pc-software driver den fordybende surround sound. Vælg dine foretrukne surround sound-indstillinger, og gør dit JBL Quantum 400 gaming-headset personligt fra et brugervenligt instrumentbræt ved at skabe separate profiler og RGB-effekter og ændre mikrofonindstillinger. Du kan også justere equalizeren eller vælge mellem 6 forudindstillinger.

FAQs & How-Tos

24 results
  • To configure the 7.1 Surround feature on your PC, please follow the guide below:

    1. In the left corner on your screen right next to the Windows logo, click on the spy-glass to start a search on your PC.
    2. Type in Sound --> then select Change System Sounds:
      Surround-config-7-1

    3. Make sure that your the Quantum Headphones is your Default Device for both Speakers ( Game ) and Earphone ( Communication device )
    Surround-config-7-1_2

    4. To configure the 7.1 Surround feature, right click on the Speakers --> then select Configure Speakers
    Surround-config-7-1_3

    5. Select 7.1 Surround and click on Next
      Surround-config-7-1_4
    6. Make sure that all boxes are selected, then click Next
      Surround-config-7-1_5
    7. Make sure both boxes are selected, and then click Next
      Surround-config-7-1_6
    8. Click on Finish. Now your Quantum headphones is configured for 7.1 Surround sound. The configuration will remain after rebooting PC or reconnecting headphones.
     
    Surround-config-7-1_7
    Enjoy your sound experience #SoundIsSurvival #DareToListen
     
  • To stop hearing your own voice through your headphones, please start the JBL QuantumENGINE software, navigate to the "Microphone" tab, and change the sidetone setting to 0.
  • You can clean it by wiping it gently with a damp cloth. Take extra care not to let water leak into the speaker chamber, as it will damage the speaker drivers.
  • You can clean it by wiping it gently with a damp cloth. Take extra care not to let water leak into the speaker chamber, as it will damage the speaker drivers.
  • To reset a Quantum headset, you need to connect the product to your computer and open the QuantumEngine.

    When you have the QuantumEngine open, go to the "System Software" tap and press "Restore Factory Settings".

    Only products that are compatible with the QuantumEngine can be reset this way.

  • JBL Quantum 400 and ONE are compatible with USB C to A cable to enjoy PS4 console with RGB Lighting on, and Quantum 600 and 800 with wireless-enabled by USB dongle also gives lighting moment on PS4 console games.

    *NOTE that RGB will not light up when connecting with 3.5mm cable to any device (PC, Console, Mobile, etc.) because the cable doesn't have power enough for the RBG lighting.

     

  • Ensure that only one voice chat application is in use while in-game. Be sure you hear a click when the microphone is flipped down. The microphone will only function when it is flipped down fully. If you see a red LED on the microphone, it is muted.
    FLIP DOWN.png


    How to check your PC settings for the correct recording device
    1. Go to Control Panel
    Control panel.png
    2. Select Hardware and Sound
    Step 2.PNG
    3. Click on Sound
    Step 3.PNG
    3 Select  Recording
    Recording tap.jpg

    4. Make sure to select the proper recording device.

    1. Right-click on it Quantum headset.

      Set default communication device.jpg
    2. Now select "Set Default Device" or Select "Default Communication Device"

      Set default communication device 2.jpg

    5. Check the microphone levels by right-click on your Quantum headset. Then click on Properties
    Properties.jpg

    6. Choose Levels.
    Levels 1.jpg

    7. Adjust accordingly.
    Levels 2.jpg  

    Please also make sure the volume control on the headset is turned up. Rotate the volume wheel on your headset to increase the volume.
    Check that your headset's Game-Chat balance dial and ensure that the balance is correct, you might refer to the screenshot below from the QuantumEngine PC software.
    Volume issue Q800 - Part3.png

    If you still cannot hear the game or music audio, or if the volume is still very low, check if the TalkThrough is activated via the QuantumEngine software.
    Volume issue Q800 - Part4.png

    Finally, you can also do a short press on the Smart Ambient button on the headset (if your headset, has this feature)
    Volume issue Q800 - Part5.png

  • Ensure that only one voice chat application is in use while in-game. Be sure you hear a click when the microphone is flipped down. The microphone will only function when it is flipped down fully. If you see a red LED on the microphone, it is muted.

    Check that the PC is using the correct recording device.

    1. Go to Control Panel

    2. Select  Sound 

    3 Select  Recording

    4. Make sure to select the proper recording device.
    1. Right-click on it Quantum headset.
    2. Now select "Set Default Device" or "Select Default Communication Device"
    5. Check the microphone levels by right-click on your Quantum headset.

    6. Go to Properties

    7. Chose Levels and adjust accordingly
  • Yes, you can adjust the game and chat audio balance by rotating the dial-up and down. When you rotate the dial, you'll feel a notch that indicates the balance is 50% game and 50% chat. The slider on Quantum ONE is different and has no notch but instead a visual indicator.
  • You can adjust Equalizer, Spatial Sound, RGB LED effects, change microphone settings and update the headset's firmware

< 1 2 3 >

Can’t find what you’re looking for?

Call us

Call us

Call us now at: +45 32712498

Monday - Friday: 09.00-17.00

E-mail us

E-mail us

We are here Monday – Sunday to answer you as fast as we can!

Email us
Chat with us

Chat with us

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00

message

WhatsApp Us

Send us a message here 

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00