JBL Quantum 800
Trådløst og højtydende over-ear-gaming-headset til PC med aktiv støjdæmpning og Bluetooth 5.0
Sold from 2020 until now
Getting started with your JBL Quantum 800
Quick Start Guide
Get up and running in no time with our easy-to-follow Quick Start Guide
Register your product
Do you own this product? Register it here! And claim your warranty or service easily
Register nowDocuments & Downloads
Specifications
- Enheds-størrelser (mm)
- 50
- Aktivt frekvensområde
- 20 Hz – 20 kHz
- Enheds-følsomhed ved 1kHz/1mW (dB)
- 95
- Dynamisk frekvensområde (Hz)
- ["20 Hz - 40 kHz (Passive)", "20 Hz - 20 kHz (Active)"]
- Impedans (ohm)
- 32
- Passiv frekvensområde
- 20 Hz – 40 kHz
- Audio Cable Length (ft)
- 3.9
- Audio Cable Length (m)
- 1.2
- Dybde (cm)
- 2.7
- Ear Cup Depth (in)
- 1.1
- Højde (cm)
- 9.7
- Ear Cup External Height (in)
- 3.8
- Bredde (cm)
- 8.7
- Ear Cup External Width (in)
- 3.4
- Indre bredde (cm)
- 6.2
- Ear Cup Internal Height (in)
- 2.4
- Indre højde (cm)
- 4.2
- Ear Cup Internal Width (in)
- 1.7
- Hovedtelefonernes kabel-længde (m)
- 1.5
- Headphone Cable Length (ft)
- 4.9
- Vægt (g)
- 410
- Vægt (oz)
- 14.5
- Bluetooth-profiler
- A2DP 1.3, HFP 1.6
- Bluetooth-frekvens
- 2.402 GHz - 2.480 GHz
- Bluetooth sender-modulation
- GFSK, /4π DQPSK, 8DPSK
- Bluetooth sender-effekt
- <9 dBm
- Bluetooth-version
- 5.0
- Ladetid (timer fra helt afladet)
- 2
- Maksimal spilletid (timer)
- 14
- Audio cable
- Ja
- Bluetooth
- Ja
- Charging cable
- Ja
- Aktiv støjreduktion
- Ja
- Indbygget mikrofon
- Ja
- Bekvem og velsiddende stof-hovedbøjle
- Ja
- Genopladeligt batteri
- Ja
- Trådløse
- Ja
Sound is Survival
Vær et skridt foran alle dine konkurrenter. JBL Quantum 800-headset giver dig en fordel med nøjagtig rumlig lydplacering, tabsfri 2,4 GHz og Bluetooth dobbelt-trådløs-funktion, aktiv støjdæmpning, 14-timers batterilevetid og komfort fra memory-skum. JBL QuantumSOUND Signature er designet til total fordybelse og giver dig en lydfordel i enhver kamp. Mikrofonen leverer klare multiplayer-interaktioner med et DISCORD-certificeret spil/chat-system, som også er kompatibelt med TeamSpeak og mere. Et ergonomisk design med læderørepuder med memory-skum holder dig komfortabel i timevis. Et JBL Quantum 800-headset gør dig mere avanceret, uanset om du er en erfaren professionel gamer eller nybegynder.
FAQs & How-Tos
-
The JBL Quantum 800 can only be used via a 3.5mm, Bluetooth, or 2.4Ghz wireless connection.Was this helpful? Thank you for your feedback!
-
Yes. You can configure the volume of the mic monitoring in JBL QuantumENGINE. And the default setting of the mic monitoring is set of “OFF”. Was this helpful? Thank you for your feedback! -
Make sure your headset is configured correctly in your Windows settings. The setting should normally be JBL Quantum *Game* to experience QuantumSURROUND.
Please check out this video to assist you further!
https://www.youtube.com/watch?v=LA80RmBrbYgWas this helpful? Thank you for your feedback! -
You can clean it by wiping it gently with a damp cloth. Take extra care not to let water leak into the speaker chamber, as it will damage the speaker drivers.Was this helpful? Thank you for your feedback!
-
JBL Quantum 400 and ONE are compatible with USB C to A cable to enjoy PS4 console with RGB Lighting on, and Quantum 600 and 800 with wireless-enabled by USB dongle also gives lighting moment on PS4 console games.
*NOTE that RGB will not light up when connecting with 3.5mm cable to any device (PC, Console, Mobile, etc.) because the cable doesn't have power enough for the RBG lighting.Was this helpful? Thank you for your feedback! -
You might have to add a USB extension dock to get the JBL Quantum 350/600/800/810 dongle as close to the headset, or place the common sources of interference (e.g. routers, Wi-Fi speakers etc.) as far from the JBL Quantum 350/600/800/810 dongle.
Was this helpful? Thank you for your feedback! -
The battery is charged using an included USB-A to USB-C USB fabric cable. It will be fully charged for 2 hrs. Note, this cable is only for charging the battery, it will not deliver audio.Was this helpful? Thank you for your feedback!
-
With a short press of the dedicated Bluetooth button on the underside of the right ear cup, it powered on and enter the pairing mode.
Was this helpful? Thank you for your feedback! -
Ensure that only one voice chat application is in use while in-game. Be sure you hear a click when the microphone is flipped down. The microphone will only function when it is flipped down fully. If you see a red LED on the microphone, it is muted.
How to check your PC settings for the correct recording device
1. Go to Control Panel
2. Select Hardware and Sound
3. Click on Sound
3 Select Recording
4. Make sure to select the proper recording device.-
Right-click on it Quantum headset.
-
Now select "Set Default Device" or Select "Default Communication Device"
5. Check the microphone levels by right-click on your Quantum headset. Then click on Properties
6. Choose Levels.
7. Adjust accordingly.
Please also make sure the volume control on the headset is turned up. Rotate the volume wheel on your headset to increase the volume.
Check that your headset's Game-Chat balance dial and ensure that the balance is correct, you might refer to the screenshot below from the QuantumEngine PC software.
If you still cannot hear the game or music audio, or if the volume is still very low, check if the TalkThrough is activated via the QuantumEngine software.
Finally, you can also do a short press on the Smart Ambient button on the headset (if your headset, has this feature)Was this helpful? Thank you for your feedback! -
-
Onboard Active Noise Cancelling is controlled by the multi-function button on the rear of the left ear-cup. Switched on by default, you can SINGLE press the ANC button to toggle it On/Off and LONG press to active TalkThru. Turn on ANC again by a single press on the multi-function button.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Chat with us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00
