JBL Live Pro+ TWS
Totalt trådløse øretelefoner med støjreduktion
Sold from 2020 until now
Getting started with your JBL Live Pro+ TWS
Quick Start Guide
Get up and running in no time with our easy-to-follow Quick Start Guide
Register your product
Do you own this product? Register it here! And claim your warranty or service easily
Register nowDocuments & Downloads
Specifications
- Enheds-størrelser (mm)
- 11
- Enheds-følsomhed ved 1kHz/1mW (dB)
- 102
- Dynamisk frekvensområde (Hz)
- 20 Hz – 20 kHz
- Impedans (ohm)
- 16
- Antal dynamiske enheder pr. øre
- 1
- Vægt (g)
- 49.5
- Charging Case Weight (oz)
- 1.7
- Vægt (g)
- 10
- Earpiece Weight (oz)
- 0.4
- Bluetooth-profiler
- A2DP V1.3, AVRCP V1.6, HFP V1.7
- Bluetooth-frekvens
- 2.4 GHz – 2.4835 GHz
- Bluetooth sender-modulation
- GFSK, π/4DQPSK, 8DPSK
- Bluetooth sender-effekt
- 0 - 13dbm
- Bluetooth-version
- 5.0
- Charging case battery life (max hours)
- 21
- Ladetid (timer fra helt afladet)
- 2
- Maksimal spilletid uden aktiv støjreduktion (timer)
- 7
- Maksimal spilletid med aktiv støjreduktion (timer)
- 6
- Maksimal spilletid (timer)
- 7
- Bluetooth
- Ja
- Charging cable
- Ja
- Touch-knapper
- Ja
- Stemmeassistent
- Ja
- Adaptiv støjreduktion
- Ja
- Lader lyd fra omgivelserne passere
- Ja
- Indbygget mikrofon
- Ja
- Smart opladningsetui
- Ja
- Håndfri opkald
- Ja
- Den berømte JBL-lyd
- Ja
- Genopladeligt batteri
- Ja
- Lynopladning (5 min. = 1 t spilletid)
- Ja
- Svedsikre
- Ja
- Multifunktionel TalkThru-knap
- Ja
- Ægte trådløse
- Ja
- Trådløse
- Ja
- IPX-rating
- IPX4
Mere musik, mindre støj
JBL Live Pro+ TWS leverer den bedste lyd, uanset hvilken enhed du bruger. Nyd en fordybende og totalt trådløs oplevelse med den utrolige JBL-signaturlyd. Lad Smart Ambient forbinde dig med omgivelserne, eller fokuser på musikken med adaptiv støjreduktion. Skift nemt fra musik til gruppeopkald med fire stråleformede mikrofoner (to pr. side), som indfanger din stemme, så det føles som at tale ansigt til ansigt. En tredje mikrofon reducerer støjen fra omgivelserne. Få hjælp fra din foretrukne stemmeassistent med din stemme eller et tryk på ørekapslen. Hvis du opsætter Hey Google, kan du aktivere funktioner på dine JBL Live Pro+ TWS blot med din stemme. Alle kommandoer sidder i ørestykkerne, så du kan styre musik og opkald med blot en finger. Med op til 28 timers spilletid fra Qi-kompatibel, trådløs opladning og superhurtig, trådløs opladning, er de altid klar til sætte energi til din dag. (*) Understøttes kun på Android. (**) Android 6.0 eller højere er påkrævet for fuld adgang til Alexa-funktioner, når denne enhed bruges.
Live Pro+ TWS-hovedtelefonerne giver den bedste lyd til enhver enhed. De er små, men kraftfulde med dynamiske enheder på 11 mm, som leverer den ekstraordinære JBL-signaturlyd. Hele dagen, hver dag.
Adaptiv støjreduktion betyder nul forstyrrelser, når du vil fokusere på dine studier eller fordybe dig i musikken. Og hvis du vil høre verden omkring dig, uden at tage hovedtelefonerne af, skærper Smart Ambient lyden fra omgivelserne.
Med op til 7 timers afspilning plus 21 i etuiet, og lynopladningen af JBL Live Pro+ TWS, har du lyd til hele dagen. Du kan nemt hente strøm med lydopladning af JBL Live Pro+ TWS og Qi-kompatibel trådløs opladning
Savner du møder ansigt til ansigt? Takket være teknologien til isolering af støj og vind og stråleformede mikrofoner, går din stemme klart igennem, så du får fornemmelsen af en personlig samtale.
Så snart du åbner etuiet, parres hovedtelefonerne med din enhed, og du er klar til at høre musik, foretage opkald i mono/stereo eller aktivere din stemmeassistent i et eller begge ører. Og med JBL-appen er det nemt at tildele funktioner til hvert ørestykke. Med Googles Fast Pair-teknologi forbindes JBL Live Pro+ TWS øjeblikkeligt til din Android-enhed. Du kan også parre med andre enheder ved blot at trykke på enhedernes skærm.
Få hjælp fra din foretrukne stemmestyrede assistent ved at bruge din stemme eller trykke på ørekoppen. Aktiver aktiv støjreduktion eller Ambient Aware, tjek batteritid, eller sluk for JBL Live Pro+ TWS - blot med din stemme og Hey Google. Brug den helt nye JBL-app til nemt at indstille dine foretrukne stemme-assistenter.
(*) Understøttes kun på Android. (**) Android 6.0 eller højere er påkrævet for fuld adgang til Alexa-funktioner, når denne enhed bruges.
Tag fantastisk musik med dig overalt. JBL Live Pro+ TWS hovedtelefonerne er vandafvisende (IPX4-certificeret) og leveres med fem sæt ørespidser af silikone som sikrer en perfekt pasform.
Dine hovedtelefoner skal tilpasse sig dig, ikke omvendt. Lyden og funktionerne i JBL Live Pro+ TWS-hovedtelefonerne kan nemt personliggøres med den gratis app My JBL Headphones: Skift EQ-indstillinger, vælg din foretrukne stemmeassistent, og tjek den bedste ørespids til dit øre med blot nogle få trin.
FAQs & How-Tos
18 results
-
It is not uncommon to have charging problems with True Wireless headphones. You may encounter that charging stops, does not start at all or that one of the ear buds suddenly switches on and begins the pairing process. This is almost always caused by dirt on the metal charging contacts. These contacts are vulnerable because they can easily be contaminated by sweat, skin grease, or ear wax. They are usually gold plated, but gold plating does not prevent surface dirt.
If you have charging problems, the first step is to always clean all contact points, on each earbud and on the charging case.
You will need: cotton cloth or makeup swab, cotton swabs and rubbing alcohol. Also a pencil with eraser for further cleaning.
Use a cotton swab with some rubbing alcohol to clean the charging terminals of the headphones. Rotate the swab and scrub lightly on each contact surface, then use a cotton cloth to remove any dust and cotton residue left on the headphones. It is important to perform this process periodically to keep your headphones clean, thus avoiding affecting the charging speed/quality.
Wipe the contact pins in the charging case with a clean cotton swab. The swab can be slightly moistened with rubbing alcohol, but it is important that the interior is completely dry before closing the box. Use the cotton cloth and wait for it to dry.
Repeat until the contact points are visibly clean, and charging should work as designed.
Try cleaning the contacts with the tip of a pencil and the eraser at the end of the pencil, the graphite and rubber can help to re-establish charging also.
This procedure can be performed on all True Wireless Stereo earphones and cases.Was this helpful? Thank you for your feedback! -
If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using.
Was this helpful? Thank you for your feedback! -
• Always have clear line of sight between your Bluetooth device (speaker, headphones etc.) and source device (Smartphone/tablet/PC etc). Be aware of obstacles in front of your devices.
• Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.
• Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.
• Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.
• Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.
• Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.Was this helpful? Thank you for your feedback! -
Visit the App Store and download the ‘Amazon Alexa’ App.
- Click the Plus(+) button on the top right of the screen.
- Then select ‘Add Device‘.
- Select headphones from the list and then choose your Headphones from the list of available devices.
- Follow the rest of the instructions in the Alexa App to complete the setup.
Was this helpful? Thank you for your feedback! -
If not pre-installed on your Android device, visit your App store to download the ‘Google Assistant’ App.
After you have paired your JBL headphones to your device via Bluetooth, you should receive a pop-up notification (pictured below). Please tap the notification on your device to start the Google Assistant setup. You will now be directed to the Google Assistant App.Step 1
Follow the steps to connect and pair “JBL XXXX-LE” (depends on your model) with your devices.
Once set up is complete, you will see the below screen:Step 2
PLEASE NOTE: In order to verbally interact with your Google Assistant via the headphone you must turn on the ‘Spoken Notifications’ in the Google Assistant App. This can be found under: Assistant Devices > Notifications. Alternatively, your JBL headphones can be added to the Google Assistant App manually by adding them as a Bluetooth device if this was not done when first paired. Google Assistant must be selected as your chosen voice assistant in the settings of the My JBL Headphones App also.
Was this helpful? Thank you for your feedback! -
Visit your App store to download the ‘Google Assistant’ App.
After you have paired your JBL headphones to your device via Bluetooth, you should receive a pop-up notification (pictured below). Please tap the notification on your device to start the Google Assistant setup. You will now be directed to the Google Assistant App.Step 1
Follow the steps to connect and pair “JBL XXXX-LE” with the Google Assistant App, the name will depend on your model.
Once set up is complete, you will see the below screen:Step 2
PLEASE NOTE: To verbally interact with your Google Assistant via the headphone, you must turn on the ‘Spoken Notifications’ in the Google Assistant App. This can be found under Assistant Devices > Notifications. Alternatively, your JBL headphones can be added to the Google Assistant App manually by adding them as a Bluetooth device if this was not done when first paired. Google Assistant must be selected as your chosen voice assistant in the settings of the My JBL Headphones App also.
Was this helpful? Thank you for your feedback! -
Double-tap the button on the right earbud, then on the third tap - press and hold the button for more than 5 seconds (until the unit shuts off).
This restores the earbuds to the factory defaults.
TWS must be connected to perform the reset, so neither of the earbuds should be off or in the charging case.
It also may be necessary to remove or forget the earbuds from the list of paired Bluetooth devices in order to pair again.Was this helpful? Thank you for your feedback! -
To perform a hardware reset of your earbuds, press and hold the reset button on the charging case* for more than 5 seconds. This resets the earbuds without restoring the settings to the factory defaults.
* Location
Live 300TWS/Live Pro+ TWS: Inside the charging case between the earbuds.
Live Free NC+/Reflect Mini NC TWS/Reflect Aero: On the back of the charging case, next to the USB-C port.
Club Pro+ TWS: On the bottom of the charging case, next to the USB-C port.Was this helpful? Thank you for your feedback! -
The voice assistant you select in the initial set-up (pictured below) will be used as the default assistant on your headphones.
You can change the default assistant in the ‘My JBL Headphones’ app:- Open the My JBL Headphones app on your device.
- Select the headphones you are connected too.
- Go to Settings by clicking the symbol in the top right corner.
- Select Voice Assistant.
- Now you can select your preferred voice assistant.
Your headphones may restart after switching Voice Assistant.Was this helpful? Thank you for your feedback! -
1. Put the earbuds back into the charging case and close the lid. 2. Press and hold the buttons on both the left and right earbuds for more than 2 seconds. Alternatively, only press and hold one of the buttons to just turn off the left or right earbud as required. 3. Use the Auto-off function via the JBL Headphone app (Only applicable for headphones supported in our JBL Headphone app).Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Chat with us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00
