JBL Everest Elite 700
Trådløs omsluttende NXTGen-hovedtelefon med aktiv støjreduktion
Sold from 2015 until now
Getting started with your JBL Everest Elite 700
Documents & Downloads
Specifications
- Enhedsstørrelse
- 40mm
- Dynamikområde
- 10-22 kHz
- Enhedsfølsomhed
- 102 dB/1 kHz, 1 mW
- Maks. SPL
- 107 dB
- Nominelt effektinput
- 30mW
- Mikrofonfølsomhed
- -42 dBV/Pa
- Vægt (g)
- 274
- Mål B x H x L (mm)
- 76,9 x 176,5 x 169,5
- Bluetooth-sendeeffekt
- <4 dBm
- Bluetooth-sendemodulation
- GFSK π/4, DQPSK, 8-DPSK
- Bluetooth-spec.
- 4.1
- Bluetooth-understøttelse
- A2DP V1.3, AVRCP V1.5, HFP V1.6, HSP V1.2
- Batteritype
- Li-ionpolymerbatteri (3,7 V, 850 mAh)
- Musikafspilningstid med Bluetooth tændt
- op til 25 timer
- Driver sensitivity
- 99dB@1kHz, 1mW
- Driver size (mm)
- 40
Experience a New Standard in Wireless Headphones
JBL® Everest™ Elite 700 er legendarisk lyd - løftet til en ny standard.<CRLF>Bluetooth 4.0 giver trådløse forbindelsesmuligheder, og med NXTGen-teknologien får du ikke alene den fredfyldte oplevelse af aktiv støjreduktion. Du kan også selv kontrollere, hvor meget af den omgivende lyd, der lukkes ind. Således vælger du selv balancen mellem din lytteoplevelse og opmærksomhed på omgivelserne. Den legendariske JBL Pro Audio-lyd leverer en dynamisk lydoplevelse, de skulpterede ørepuder sikrer suveræn pasform omkring dine ører, et genopladeligt batteri giver 15 timers spilletid, og med TruNote™ automatisk lydkalibrering får du nu glæde af det ultimative inden for komfort, frihed og personlig tilpasning. Den indbyggede mikrofon giver nem adgang til opkald.
FAQs & How-Tos
-
The Elite headphones are equipped with an auto off capability to preserve battery life when not in use. The headphones will automatically turn off after 10 minutes of inactivity: meaning no audio or voice. In situations where the user would like to enjoy the benefits of the ANC technology only - when not listening to music or talking on the phone , we advise to turn off the Auto Off feature in the app to keep the headphone running continuously.Was this helpful? Thank you for your feedback!
-
It is possible to replace the ear pads, but there are details to consider. On Elite 700: The ear pads are held in place by a plastic plate with claws, and some of the claws will most likely break off when you remove the pad. You do this by grabbing under the edge where the fabric ends, then pulling hard outward. The claws will eventually let go, and some of them will break off, rattling inside the ear pod. The only way to get them out is to unscrew the speaker plate, lift it up, and shake out the broken-off claws. The new pads are simply centered over the speaker plate, and the claws pressed into the holes with a firm pressure. On Everest 700: The ear pads are glued into position with double-adhesive tape. Pull the old pads off with a forceful, steady pull, until the glue lets go. Remove the protective layer on the new pads, and carefully position them correctly before pressing home all the way around the edge.Was this helpful? Thank you for your feedback!
-
The EVEREST models 100, 300 and 700 are all updated with the HID (Human Interface Device) tool, available in the download section for each model. This tool works with Windows computers only. The EVEREST ELITE models are updated with a USB tool available on the special Everest web page. This tool is available in both an Apple MAC OS version and a Windows version. This USB tool update is used for the first production run of ELITE models ONLY, and only once! All later production runs, and all updates after this first USB update, will take place wirelessly through the My JBL Headphone app, made for iOS and Android.Was this helpful? Thank you for your feedback!
-
No. The only way that the Noise Cancellation feature can be activated is while you are using the headphones wirelessly. You cannot use NC while the headphones are plugged into a device or charging.Was this helpful? Thank you for your feedback!
-
Yes, the two model 300 versions are of identical size, and so are the two model 700 versions. The carrying cases can be purchased as spare parts.Was this helpful? Thank you for your feedback!
-
The app works with the Everest Elite models only.Was this helpful? Thank you for your feedback!
-
Yes, ANC needs to be ON.Was this helpful? Thank you for your feedback!
-
Each headphone is shipped with a micro USB charging cable. USB is the only way to charge the headphones, and all normal USB chargers may be used.Was this helpful? Thank you for your feedback!
-
Sorry, neither AAC nor aptX are supported.Was this helpful? Thank you for your feedback!
-
No, the tool will tell you to switch them ON when necessary.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Call us
Call us now at:
+45 32712498
Monday - Friday: 09.00-17.00
Chat with us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00