AVAP 2G

AVAP 2G

AVR20 MKII Receiver & AVS10 Speaker System - 6PC

Sold from 1997 until 1999

Documents & Downloads

Specifications

Audio Inputs
3 line, 1 phono
Audio Tape Loops
2
Audio/Video Inputs
2
Audio/Video Loops
1
Preamp Outputs
main, center, rear, sub
Power Amp Inputs
main
Video Outputs
2
Amplifier Power (RMS)
STEREO – 60 watts per channel @ 8 ohms
Total Harmonic Distortion
0.09% @ 8ohms
Amplifier Power (RMS)
50 watts (8 ohms) Surround Mode (front - per channel - 8 ohms)
Total Harmonic Distortion
0.3% (center @ 8 ohms)
Amplifier Power (RMS)
50 watts (8 ohms) Surround Mode (center - per channel - 8 ohms)
Amplifier Power (RMS)
20 watts (8 ohms) Surround Mode (rear - per channel - 8 ohms)
High Instantaneous Current Capability (HCC)
± 30 Amps
Negative Feedback
26dB
Selectivity
ADJACENT – 5dB
IF Rejection
FM – 100dB
Stereo Separation
45dB
Sensitivity
EXTERNAL ANTENNA – 25 microvolts
Total Harmonic Distortion
MONO – 0.2% @ 1kHz
Frequency Response
0.5Hz – 150kHz (+0/-3dB)
Slew Rate
80 v/microsecond
Rise Time
1.8 microseconds
Transient Intermodulation Distortion (TIM)
unmeasurable
Signal-to-Noise Ratio
74dB (phono)
Signal-to-Noise Ratio
CD, VIDEO, etc – 93dB (Aux Input)
Input Level/Impedance
PHONO – 2.5 mv/47k ohms
Input Level/Impedance
CD, VIDEO, etc – 150 mv/22k ohms
RIAA Equalization
±1dB
Phono Overload
140mv
Bass Control
Tone Control... ±10dB @ 100Hz
Treble Control
±10dB @ 10kHz
Loudness Control
+7dB @ 100Hz & +3dB @ 10kHz
Usable Sensitivity
MONO – 11.2dB
Quieting Sensitivity
STEREO – 37.2dBf
Signal-to-Noise Ratio
74dB/70dB (Mono/Stereo)
MSRP U.S.
$1099.95 per system
Weight
23.6lb Receiver
Dimensions (H x W x D)
RECEIVER… 5 1/2 x 17 1/2 x 14 15/16
Dimensions (H x W x D)
SATELLITES… 7 x x 4 3/4 x 3 3/4
Dimensions (H x W x D)
CENTER… 4 3/4 x 10 1/2 x 3 3/4
Dimensions (H x W x D)
SUB… 11 1/2 x 11 1/2 x 11 1/2
Alternate Channel Selectivity
FM... 65dB
AM Rejection
FM... 55dB
Alternate Channel Selectivity
AM... 55dB
Image Rejection
AM... 35dB
IF Rejection
AM... 60dB
Total Harmonic Distortion
FM... 0.3% @ 1kHz
Capture Ratio
FM... 2.0dB
Frequency Response
45Hz – 150kHz
Crossover Frequency(ies)
continuously variable 50Hz – 150Hz
Input Impedance
200k ohms (high level)
Input Impedance
10 ohms (low level)
Recommended Amplifier Power (RMS)
50 Watts
Subwoofer Transducer
specially designed 8 inch polycone
Frequency Response
200Hz – 20kHz
Crossover Frequency(ies)
5kHz
Nominal Impedance
compatible with 8 ohms
Low-Frequency Transducer (Woofer)
3-1/2 inch shielded
High-Frequency Transducer (Tweeter)
.5 inch (13mm) polycarbonate tweeter with acoustic lens
Frequency Response
150Hz – 20kHz
Crossover Frequency(ies)
5kHz
Nominal Impedance
compatible with 8 ohms
Low-Frequency Transducer (Woofer)
3-1/2 inch shielded

Can’t find what you’re looking for?

Call us

Call us

Call us now at: +45 32712498

Monday - Friday: 09.00-17.00

E-mail us

E-mail us

We are here Monday – Sunday to answer you as fast as we can!

Email us
Chat with us

Chat with us

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00

message

WhatsApp Us

Send us a message here 

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00